Search for geospatial/GIS data

Find GIS data held at MIT and other institutions

10,000+ results returned

  1. Title: MassGIS 2003 Massachusetts areas of critical environmental concern (July 2000)

    Contributors:

    Summary: The Areas of Critical Environmental Concern (ACEC) datalayer shows the location of areas that have been designated ACECs by the Secretary of Environmental Affairs. ACEC designation requires greater environmental review of certain kinds of proposed development under state jurisdiction within the ACEC boundaries. The ACEC Program is administered by the Department of Environmental Management (DEM) on behalf of the Secretary of Environmental Affairs. The Massachusetts Coastal Zone Management (MCZM) Office managed the original Coastal ACEC Program from 1978 to 1993, and continues to play a key role in monitoring coastal ACECs. Procedures for ACEC designation and the general policies governing the effects of designation are contained in the ACEC regulations (301 CMR 12.00). For more information about the ACEC datalayer or about the effects of ACEC designation, contact the ACEC Program at (617) 626-1394. The ACEC datalayer has been compiled by MCZM and DEM and includes both coastal and inland areas. New ACEC polygons are added periodically (1 - 2 per year) because the program continues to evaluate and designate new ACECs. This datalayer contains 25 ACECs.

    View full record

  2. Title: MassGIS 2000 Areas of Critical Environmental Concern (July 2000)

    Contributors:

    Summary: The Areas of Critical Environmental Concern (ACEC) datalayer shows the location of areas that have been designated ACECs by the Secretary of Environmental Affairs. ACEC designation requires greater environmental review of certain kinds of proposed development under state jurisdiction within the ACEC boundaries. The ACEC Program is administered by the Department of Environmental Management (DEM) on behalf of the Secretary of Environmental Affairs. The Massachusetts Coastal Zone Management (MCZM) Office managed the original Coastal ACEC Program from 1978 to 1993, and continues to play a key role in monitoring coastal ACECs. Procedures for ACEC designation and the general policies governing the effects of designation are contained in the ACEC regulations (301 CMR 12.00). For more information about the ACEC datalayer or about the effects of ACEC designation, contact the ACEC Program at (617) 727-3160 ext. 552 or ext. 564. The ACEC datalayer has been compiled by MCZM and DEM and includes both coastal and inland areas. New ACEC polygons are added periodically (1 - 2 per year) because the program continues to evaluate and designate new ACECs. Currently the datalayer contains 25 ACECs.

    View full record

  3. Title: MassGIS 2003 Massachusetts Interim Wellhead Protection Areas for Community Water Supply (March 2003)

    Contributors:

    Summary: This datalayer contains polygons representing Interim Wellhead Protection Areas (IWPA) for community water supply (IWPACOM) sources as defined by the Massachusetts Department of Environmental Protection. Wellhead protection areas are important for protecting the recharge area around public water supply (PWS) wells. A Zone II is a wellhead protection area that has been determined by hydrogeologic modeling and approved by the Department of Environmental Protection's (DEP) Drinking Water Program (DWP). In cases where hydro-geologic modeling studies have not been performed and there is no approved Zone II, an Interim Wellhead Protection Area (IWPA) is established based on DEP DWP well pumping rates or default values. Certain land uses may be either prohibited or restricted in both approved (Zone II) and interim (IWPA) wellhead protection areas. In the absence of an approved Zone II, DEP has adopted the Interim Wellhead Protection Area (IWPA) as the primary, protected recharge area for PWS groundwater sources. For PWS sources that pump less than 100,000 gallons per day (GPD), the IWPA radius is proportional to the pumping rate in gallons per minute (GPM). Pumping rate is determined by DEP DWP based on one of the following methods, DWP approved pumping rate, metered data or Title 5 flow rate. The formula used for calculating the PWS well point buffer radius in feet is: Radius = ( 32 x pumping rate in GPM ) + 400 The minimum IWPA radius is 400 feet, the maximum (default) radius reached at 100,000 GPD (70 GPM) is 2,640 feet (1/2 mile). In instances where DWP pumping rate information is unavailable DWP approved default radius values are assigned based on PWS well classification. The default radius for community class PWS groundwater sources (GW) is 2,640 feet (804.6 meters). The default radius for non-community sources is 750 feet (228.6 meters) for Non Transient (NTNC) wells and 500 feet (152.4 meters) for Transient (TNC) wells. The DEP GIS Program currently [2003] maintains two statewide IWPA coverages (IWPA and IWPACOM) shared through MassGIS. Both are generated by buffering groundwater sources in the DEP Public Water Supply datalayer (PWS_DEP). The IWPA coverage contains variable width IWPA buffers for BOTH approved community and non community groundwater sources in the DEP PWS datalayer which do not have an approved Zone II. The IWPACOM coverage contains IWPAs ONLY for community PWS sources which do not have an approved Zone II.

    View full record

  4. Title: MassGIS 2003 Massachusetts Interim Wellhead Protection Areas (March 2003)

    Contributors:

    Summary: This datalayer contains polygons representing Interim Wellhead Protection Areas (IWPA) for community and non-community water supply sources as defined by the Massachusetts Department of Environmental Protection. Wellhead protection areas are important for protecting the recharge area around public water supply (PWS) wells. A Zone II is a wellhead protection area that has been determined by hydrogeologic modeling and approved by the Department of Environmental Protection's (DEP) Drinking Water Program (DWP). In cases where hydro-geologic modeling studies have not been performed and there is no approved Zone II, an Interim Wellhead Protection Area (IWPA) is established based on DEP DWP well pumping rates or default values. Certain land uses may be either prohibited or restricted in both approved (Zone II) and interim (IWPA) wellhead protection areas. In the absence of an approved Zone II, DEP has adopted the Interim Wellhead Protection Area (IWPA) as the primary, protected recharge area for PWS groundwater sources. For PWS sources that pump less than 100,000 gallons per day (GPD), the IWPA radius is proportional to the pumping rate in gallons per minute (GPM). Pumping rate is determined by DEP DWP based on one of the following methods, DWP approved pumping rate, metered data or Title 5 flow rate. The formula used for calculating the PWS well point buffer radius in feet is: Radius = ( 32 x pumping rate in GPM ) + 400 The minimum IWPA radius is 400 feet, the maximum (default) radius reached at 100,000 GPD (70 GPM) is 2,640 feet (1/2 mile). In instances where DWP pumping rate information is unavailable DWP approved default radius values are assigned based on PWS well classification. The default radius for community class PWS groundwater sources (GW) is 2,640 feet (804.6 meters). The default radius for non-community sources is 750 feet (228.6 meters) for Non Transient (NTNC) wells and 500 feet (152.4 meters) for Transient (TNC) wells. The DEP GIS Program currently [2003] maintains two statewide IWPA coverages (IWPA and IWPACOM) shared through MassGIS. Both are generated by buffering groundwater sources in the DEP Public Water Supply datalayer (PWS_DEP). The IWPA coverage contains variable width IWPA buffers for BOTH approved community and non-community groundwater sources in the DEP PWS datalayer which do not have an approved Zone II. The IWPACOM coverage contains IWPAs ONLY for community PWS sources which do not have an approved Zone II.

    View full record

  5. Title: MassGIS 2003 Massachusetts Approved Wellhead Protection Areas (Zone II) (Arcs) (March 2003)

    Contributors:

    Summary: This datalayer contains polylines representing internal and external boundaries of approved Wellhead Protection (Zone II) Areas for the state of Massachusetts as defined by the Massachusetts Department of Environmental Protection (DEP). Wellhead protection areas are important for protecting the recharge area around public water supply (PWS) wells. A Zone II is a wellhead protection area that has been determined by hydrogeologic modeling and approved by the Department of Environmental Protection's (DEP) Drinking Water Program (DWP). In cases where hydro-geologic modeling studies have not been performed and there is no approved Zone II, an Interim Wellhead Protection Area (IWPA) is established based on DEP DWP well pumping rates or default values. Certain land uses may be either prohibited or restricted in both approved (Zone II) and interim (IWPA) wellhead protection areas. As stated in 310 CMR 22.02, a Zone II is: 'That area of an aquifer which contributes water to a well under the most severe pumping and recharge conditions that can be realistically anticipated (180 days of pumping at safe yield, with no recharge from precipitation). It is bounded by the groundwater divides which result from pumping the well and by the contact of the aquifer with less permeable materials such as till or bedrock. In some cases, streams or lakes may act as recharge boundaries. In all cases, Zone IIs shall extend up gradient to its point of intersection with prevailing hydrogeologic boundaries (a groundwater flow divide, a contact with till or bedrock, or a recharge boundary).' DEP Zone II and Public Water Supply (PWS) data are closely linked, and DEP Zone II data should be used in association with the DEP Public Water Supply datalayer (PWS_DEP). During the approval process each Zone II is assigned a unique ID (ZII-NUM) by DEP DWP. The DEP Public Water Supply and Zone II datalayers use the ZII-NUM to link protected PWS sources to their approved Zone II. Since some PWS sources within a Zone II may not have been used to delineate that Zone II, the ZII-NUM item can be used to identify the specific wells for which a Zone II was delineated. If the DEP Public Water Supply datalayer item ZII-NUM is equal to 0 than that PWS source has no Zone II and should therefore have an Interim Wellhead Protection Area (IWPA).

    View full record

  6. Title: MassGIS 2003 Massachusetts Approved Wellhead Protection Areas (Zone II) (Region Polygons) (March 2003)

    Contributors:

    Summary: This datalayer contains polygons representing approved Wellhead Protection (Zone II) Area regions for the state of Massachusetts as defined by the Massachusetts Department of Environmental Protection (DEP). Because wells tend to be clustered by the nature of the resource they tap, the Zone IIs protecting those wells will frequently overlap. As a result of this overlap, intersecting Zone IIs are composed of multiple polygons and more than one Zone II can share an individual polygon. The regions data model represents complex area features and supports overlapping or non-contiguous areas. The Zone II data layer uses the regions feature class and topological structure to manage polygonal overlap, by combining all the polygons a Zone II comprises into a single region feature subclass (see the Approved Wellhead Protection Areas (Zone II) (Polygons) layer for component polygons) . Wellhead protection areas are important for protecting the recharge area around public water supply (PWS) wells. A Zone II is a wellhead protection area that has been determined by hydrogeologic modeling and approved by the Department of Environmental Protection's (DEP) Drinking Water Program (DWP). In cases where hydro-geologic modeling studies have not been performed and there is no approved Zone II, an Interim Wellhead Protection Area (IWPA) is established based on DEP DWP well pumping rates or default values. Certain land uses may be either prohibited or restricted in both approved (Zone II) and interim (IWPA) wellhead protection areas. As stated in 310 CMR 22.02, a Zone II is: 'That area of an aquifer which contributes water to a well under the most severe pumping and recharge conditions that can be realistically anticipated (180 days of pumping at safe yield, with no recharge from precipitation). It is bounded by the groundwater divides which result from pumping the well and by the contact of the aquifer with less permeable materials such as till or bedrock. In some cases, streams or lakes may act as recharge boundaries. In all cases, Zone IIs shall extend up gradient to its point of intersection with prevailing hydrogeologic boundaries (a groundwater flow divide, a contact with till or bedrock , or a recharge boundary).' DEP Zone II and Public Water Supply (PWS) data are closely linked, and DEP Zone II data should be used in association with the DEP Public Water Supply datalayer (PWS_DEP). During the approval process each Zone II is assigned a unique ID (ZII-NUM) by DEP DWP. The DEP Public Water Supply and Zone II datalayers use the ZII-NUM to link protected PWS sources to their approved Zone II. Since some PWS sources within a Zone II may not have been used to delineate that Zone II, the ZII-NUM item can be used to identify the specific wells for which a Zone II was delineated. If the DEP Public Water Supply datalayer item ZII-NUM is equal to 0 than that PWS source has no Zone II and should therefore have an Interim Wellhead Protection Area (IWPA).

    View full record

  7. Title: MassGIS 2003 Massachusetts Public Water Supplies (March 2003)

    Contributors:

    Summary: The Public Water Supply (PWS) datalayer contains points representing the locations of Massachusetts public community surface and groundwater supply sources and public non-community supply sources as defined in 310 CMR 22.00. The public water supply systems represented in this datalayer are based primarily on information in the Massachusetts Department of Environmental Protection's (DEP) Water Quality Testing System (WQTS) database. The WQTS database is the Department's central database for tracking water supply data. The PWS datalayer also contains the locations of proposed wells that have a defined DEP approved wellhead protection area (Zone IIs). Proposed sources are not currently tracked in WQTS. Massachusetts Drinking Water Regulations (310 CMR 22.00) As stated in 310 CMR 22.02, a Public Water System means a system for the provision to the public of piped water for human consumption if such system has at least 15 service connections or regularly serves an average of at least 25 individuals daily at least 60 days of the year. Such term includes (1) any collection, treatment, storage and distribution facilities under control of the operator of such a system and used primarily in connection with such system, and (2) any collection or pretreatment storage facilities not under such control which are used primarily in connection with such system. A public water system is either a 'community water system' or a 'non-community water system.' (a) Community water system means a public water system which serves at least 15 service connections used by year-round residents or regularly serves at least 25 year-round residents. (b) Non-community water system means a public water system that is not a community water system. 1. Non-transient non-community water system or 'NTNC' means a public water systems that is not a community water system and that regularly serves at least 25 of the same persons or more approximately four or more days per week, more that six months or 180 days per year, such as a workplace providing water to it's employees. 2. Transient non-community water system or 'TNC' means a public water system that is not a community water system or a non-transient non-community water system but is a public water system which serves water to 25 different persons at least 60 days of the year. Some examples of these types of systems are: restaurants, motels, camp grounds, parks, golf courses, ski areas and community centers.

    View full record

  8. Title: MassGIS 2003 Massachusetts Approved Wellhead Protection Areas (Zone II) (Polygons) (March 2003)

    Contributors:

    Summary: This datalayer contains polygons representing approved Wellhead Protection (Zone II) Areas for the state of Massachusetts as defined by the Massachusetts Department of Environmental Protection (DEP). Wellhead protection areas are important for protecting the recharge area around public water supply (PWS) wells. A Zone II is a wellhead protection area that has been determined by hydrogeologic modeling and approved by the Department of Environmental Protection's (DEP) Drinking Water Program (DWP). In cases where hydro-geologic modeling studies have not been performed and there is no approved Zone II, an Interim Wellhead Protection Area (IWPA) is established based on DEP DWP well pumping rates or default values. Certain land uses may be either prohibited or restricted in both approved (Zone II) and interim (IWPA) wellhead protection areas. As stated in 310 CMR 22.02, a Zone II is: 'That area of an aquifer which contributes water to a well under the most severe pumping and recharge conditions that can be realistically anticipated (180 days of pumping at safe yield, with no recharge from precipitation). It is bounded by the groundwater divides which result from pumping the well and by the contact of the aquifer with less permeable materials such as till or bedrock. In some cases, streams or lakes may act as recharge boundaries. In all cases, Zone IIs shall extend up gradient to its point of intersection with prevailing hydrogeologic boundaries (a groundwater flow divide, a contact with till or bedrock , or a recharge boundary).' DEP Zone II and Public Water Supply (PWS) data are closely linked, and DEP Zone II data should be used in association with the DEP Public Water Supply datalayer (PWS_DEP). During the approval process each Zone II is assigned a unique ID (ZII-NUM) by DEP DWP. The DEP Public Water Supply and Zone II datalayers use the ZII-NUM to link protected PWS sources to their approved Zone II. Since some PWS sources within a Zone II may not have been used to delineate that Zone II, the ZII-NUM item can be used to identify the specific wells for which a Zone II was delineated. If the DEP Public Water Supply datalayer item ZII-NUM is equal to 0 than that PWS source has no Zone II and should therefore have an Interim Wellhead Protection Area (IWPA).

    View full record

  9. Title: Zoning Map (South, sheet 2 of 2), Medfield, Massachusetts, 1990 (Raster Image)

    Contributors:

    Summary: This layer is a georeferenced raster image of the historic paper map entitled: Town of Medfield. It was published by the Board of Assessors in 1990. Scale 1:4,800. This layer is image 2 of 2 total images of the 2 sheet source map, representing the southern side of the town. The image inside the map neatline is georeferenced to the surface of the earth and fit to the Massachusetts State Plane Coordinate System, Mainland Zone (in Feet) (Fipszone 2001). All map collar and inset information is also available as part of the raster image, including any inset maps, profiles, statistical tables, directories, text, illustrations, index maps, legends, or other information associated with the principal map. This map shows features such as roads, railroads, drainage, cities and other human settlements, territorial boundaries, shoreline features, and more. Includes also labeled tracts and cadastral divisions. This layer is part of a selection of digitally scanned and georeferenced historic maps from the Harvard Map Collection. These maps typically portray both natural and manmade features. The selection represents a range of originators, ground condition dates, scales, and map purposes.

    View full record

  10. Title: Zoning Map, Hopkinton, Massachusetts, 1997 (Raster Image)

    Contributors:

    Summary: This layer is a georeferenced raster image of the historic paper map entitled: Zoning map, town of Hopkinton, county of Middlesex, Massachusetts, prepared from aerial photography dated May 8, 1962, for the Board of Assessors by Col-East Inc. ; zoning data added by Schonfield Brothers ... June 27, 1967. It was published by the Board of Assessors in 1997. Scale [ca. 1:25,000] The image inside the map neatline is georeferenced to the surface of the earth and fit to the Massachusetts State Plane Coordinate System, Mainland Zone (in Feet) (Fipszone 2001). All map collar and inset information is also available as part of the raster image, including any inset maps, profiles, statistical tables, directories, text, illustrations, index maps, legends, or other information associated with the principal map. This map shows features such as roads, railroads, watershed names, drainage, cities and other human settlements, territorial boundaries, shoreline features, and more. Includes also zoning districts, zoning amendments, table of dimensions, and Board members' signatures. This layer is part of a selection of digitally scanned and georeferenced historic maps from the Harvard Map Collection. These maps typically portray both natural and manmade features. The selection represents a range of originators, ground condition dates, scales, and map purposes.

    View full record

  11. Title: Zoning Map (North, sheet 1 of 2), Medfield, Massachusetts, 1990 (Raster Image)

    Contributors:

    Summary: This layer is a georeferenced raster image of the historic paper map entitled: Town of Medfield. It was published by the Board of Assessors in 1990. Scale 1:4,800. This layer is image 1 of 2 total images of the 2 sheet source map, representing the northern side of the town. The image inside the map neatline is georeferenced to the surface of the earth and fit to the Massachusetts State Plane Coordinate System, Mainland Zone (in Feet) (Fipszone 2001). All map collar and inset information is also available as part of the raster image, including any inset maps, profiles, statistical tables, directories, text, illustrations, index maps, legends, or other information associated with the principal map. This map shows features such as roads, railroads, drainage, cities and other human settlements, territorial boundaries, shoreline features, and more. Includes also labeled tracts and cadastral divisions. This layer is part of a selection of digitally scanned and georeferenced historic maps from the Harvard Map Collection. These maps typically portray both natural and manmade features. The selection represents a range of originators, ground condition dates, scales, and map purposes.

    View full record

  12. Title: Zoning Map, Medford, Massachusetts, 1983 (Raster Image)

    Contributors:

    Summary: This layer is a georeferenced raster image of the historic paper map entitled: Zoning map. city of Medford, Massachusetts : April 13, 1965. It was published by the Department of Planning in 1983. Scale [ca. 1:7,200]. The image inside the map neatline is georeferenced to the surface of the earth and fit to the Massachusetts State Plane Coordinate System, Mainland Zone (in Feet) (Fipszone 2001). All map collar and inset information is also available as part of the raster image, including any inset maps, profiles, statistical tables, directories, text, illustrations, index maps, legends, or other information associated with the principal map. This map shows features such as roads, railroads, drainage, cities and other human settlements, territorial boundaries, shoreline features, and more. Includes also zoning districts. This layer is part of a selection of digitally scanned and georeferenced historic maps from the Harvard Map Collection. These maps typically portray both natural and manmade features. The selection represents a range of originators, ground condition dates, scales, and map purposes.

    View full record

  13. Title: Zoning Map, Bellingham, Massachusetts, 2001 (Raster Image)

    Contributors:

    Summary: This layer is a georeferenced raster image of the historic paper map entitled: Bellingham zoning, Bellingham D.P.W. It was published by the Department of Public Works in 2001. Scale [ca. 1:3,000]. The image inside the map neatline is georeferenced to the surface of the earth and fit to the Massachusetts State Plane Coordinate System, Mainland Zone (in Feet) (Fipszone 2001). All map collar and inset information is also available as part of the raster image, including any inset maps, profiles, statistical tables, directories, text, illustrations, index maps, legends, or other information associated with the principal map. This map shows features such as roads, railroads, drainage, cities and other human settlements, territorial boundaries, shoreline features, and more. Includes also zoning districts. This layer is part of a selection of digitally scanned and georeferenced historic maps from the Harvard Map Collection. These maps typically portray both natural and manmade features. The selection represents a range of originators, ground condition dates, scales, and map purposes.

    View full record

  14. Title: Zoning Map, Weymouth, Massachusetts, 1985 (Raster Image)

    Contributors:

    Summary: This layer is a georeferenced raster image of the historic paper map entitled: Zoning map of the town of Weymouth, Massachusetts, prepared by the Department of Public Works, Engineering Division. It was published by the Department in 1984. Scale [ca. 1:12,000]. The image inside the map neatline is georeferenced to the surface of the earth and fit to the Massachusetts State Plane Coordinate System, Mainland Zone (in Feet) (Fipszone 2001). All map collar and inset information is also available as part of the raster image, including any inset maps, profiles, statistical tables, directories, text, illustrations, index maps, legends, or other information associated with the principal map. This map shows features such as roads, railroads, drainage, cities and other human settlements, military bases, territorial boundaries, shoreline features, and more. This layer is part of a selection of digitally scanned and georeferenced historic maps from the Harvard Map Collection. These maps typically portray both natural and manmade features. The selection represents a range of originators, ground condition dates, scales, and map purposes.

    View full record

  15. Title: Brookline, Massachusetts, 1983 (Raster Image)

    Contributors:

    Summary: This layer is a georeferenced raster image of the historic paper map entitled: Map of the Town of Brookline, Massachusetts, William T. Griffiths, Commissioner of Public Works. It was published by The Commissioner in 1983. Scale [ca. 1:9,600]. The image inside the map neatline is georeferenced to the surface of the earth and fit to the Massachusetts State Plane Coordinate System, Mainland Zone (in Feet) (Fipszone 2001). All map collar and inset information is also available as part of the raster image, including any inset maps, profiles, statistical tables, directories, text, illustrations, index maps, legends, or other information associated with the principal map. This map shows features such as drainage, cities and other human settlements, roads, railroads, town boundaries, parks, selected public buildings, and more. Includes also indexes on verso.This layer is part of a selection of digitally scanned and georeferenced historic maps from the Harvard Map Collection. These maps typically portray both natural and manmade features. The selection represents a range of originators, ground condition dates, scales, and map purposes.

    View full record

  16. Title: Zoning Map, Weymouth, Massachusetts, 1992 (Raster Image)

    Contributors:

    Summary: This layer is a georeferenced raster image of the historic paper map entitled: Zoning map of the town of Weymouth, Massachusetts, prepared by the Department of Public Works, Engineering Division. It was published by the Department in 1992. Scale [ca. 1:14,000]. The image inside the map neatline is georeferenced to the surface of the earth and fit to the Massachusetts State Plane Coordinate System, Mainland Zone (in Feet) (Fipszone 2001). All map collar and inset information is also available as part of the raster image, including any inset maps, profiles, statistical tables, directories, text, illustrations, index maps, legends, or other information associated with the principal map. This map shows features such as roads, railroads, drainage, cities and other human settlements, military bases, territorial boundaries, shoreline features, and more. Includes also street index. This layer is part of a selection of digitally scanned and georeferenced historic maps from the Harvard Map Collection. These maps typically portray both natural and manmade features. The selection represents a range of originators, ground condition dates, scales, and map purposes.

    View full record

  17. Title: Manchester, Massachusetts, 1979 (Raster Image)

    Contributors:

    Summary: This layer is a georeferenced raster image of the historic paper map entitled: Town of Manchester, Massachusetts, prepared for the Board of Selectmen by Manchester Department of Public Works. It was published by the Department of Public Works in 1979. Scale ca. 1:16,100. The image inside the map neatline is georeferenced to the surface of the earth and fit to the Massachusetts State Plane Coordinate System, Mainland Zone (in Feet) (Fipszone 2001). All map collar and inset information is also available as part of the raster image, including any inset maps, profiles, statistical tables, directories, text, illustrations, index maps, legends, or other information associated with the principal map. This map shows features such as roads, railroads, drainage, cities and other human settlements, territorial boundaries, shoreline features, and more. Includes also street index, overlay map with waterways information. This layer is part of a selection of digitally scanned and georeferenced historic maps from the Harvard Map Collection. These maps typically portray both natural and manmade features. The selection represents a range of originators, ground condition dates, scales, and map purposes.

    View full record

  18. Title: Zoning Map, Weymouth, Massachusetts, 1994 (Raster Image)

    Contributors:

    Summary: This layer is a georeferenced raster image of the historic paper map entitled: Zoning map of the town of Weymouth, Massachusetts, prepared by the Department of Public Works, Engineering Division. It was published by the Department in 1994. Scale [ca. 1:14,000]. The image inside the map neatline is georeferenced to the surface of the earth and fit to the Massachusetts State Plane Coordinate System, Mainland Zone (in Feet) (Fipszone 2001). All map collar and inset information is also available as part of the raster image, including any inset maps, profiles, statistical tables, directories, text, illustrations, index maps, legends, or other information associated with the principal map. This map shows features such as roads, railroads, drainage, cities and other human settlements, military bases, territorial boundaries, shoreline features, and more. Includes also street index. This layer is part of a selection of digitally scanned and georeferenced historic maps from the Harvard Map Collection. These maps typically portray both natural and manmade features. The selection represents a range of originators, ground condition dates, scales, and map purposes.

    View full record

  19. Title: Protected and Recreational Open Space, Hamilton, Massachusetts, 1997 (Raster Image)

    Contributors:

    Summary: This layer is a georeferenced raster image of the historic paper map entitled: Protected and recreational open space mapping project : Hamilton. It was published by MassGIS in 1997. Scale 1:25,000. The image inside the map neatline is georeferenced to the surface of the earth and fit to the Massachusetts State Plane Coordinate System, Mainland Zone (in Feet) (Fipszone 2001). All map collar and inset information is also available as part of the raster image, including any inset maps, profiles, statistical tables, directories, text, illustrations, index maps, legends, or other information associated with the principal map. This map shows features such as drainage, cities and other human settlements, territorial boundaries, shoreline features, and more. Includes also legend and ownership categories of protected and recreational open space. This layer is part of a selection of digitally scanned and georeferenced historic maps from the Harvard Map Collection. These maps typically portray both natural and manmade features. The selection represents a range of originators, ground condition dates, scales, and map purposes.

    View full record

  20. Title: Boston, Massachusetts Region, Digital Elevation Model (1:5,000), 2005 - Integer version

    Contributors:

    Summary: This raster layer represents surface elevation for the Boston Region, Massachusetts. This datalayer is a subset (covering only the Boston region) of the Massachusetts statewide digital elevation model. It was created from the digital terrain models that were produced as part of the 1:5,000 Black and White Digital Orthophoto imagery project. Cellsize is 5 meters by 5 meters. Each cell has an integer value, in meters, which represents its elevation above or below sea level.

    View full record

Need help?

Ask GIS