Search for geospatial/GIS data

Find GIS data held at MIT and other institutions

124 results returned

  1. Title: Backscatter C (7125): Offshore of Bolinas, California, 2010

    Contributors:

    Summary: This layer is a georeferenced raster image containing acoustic-backscatter data for the offshore area of Bolinas, California. The acoustic-backscatter map was generated from data collected by California State University, Monterey Bay (CSUMB), by Fugro Pelagos, and by Moss Landing Marine Laboratory (MLML). Mapping was completed between 2004 and 2010, using a combination of 200-kHz and 400-kHz Reson 7125, and 244-kHz Reson 8101 multibeam echosounders, as well as 468-kHz SEA SWATHPlus and 250-kHz GeoSwath interferometric systems. Moss Landing Marine Laboratory mapped the nearshore region north of Bolinas in 2004 prior to the California Seafloor Mapping Program (CSMP). The nearshore region from south of Bolinas Lagoon to Stinson Beach was mapped by Fugro Pelagos in 2009 for a project outside of the CSMP and only bathymetry data were collected. Therefore, note that the shaded relief map coverage (see Bathymetry Hillshade--Offshore of Bolinas, California, DS 781) does not match the acoustic-backscatter map coverage (see Backscatter A-E--Offshore of Bolinas, California, DS 781). Within the acoustic-backscatter imagery, brighter tones indicate higher backscatter intensity, and darker tones indicate lower backscatter intensity. The intensity represents a complex interaction between the acoustic pulse and the seafloor, as well as characteristics within the shallow subsurface, providing a general indication of seafloor texture and sediment type. Backscatter intensity depends on the acoustic source level; the frequency used to image the seafloor; the grazing angle; the composition and character of the seafloor, including grain size, water content, bulk density, and seafloor roughness; and some biological cover. Harder and rougher bottom types such as rocky outcrops or coarse sediment typically return stronger intensities (high backscatter, lighter tones), whereas softer bottom types such as fine sediment return weaker intensities (low backscatter, darker tones). These data are not intended for navigational purposes. This layer is part of USGS Data Series 781. In 2007, the California Ocean Protection Council initiated the California Seafloor Mapping Program (CSMP) to create a comprehensive seafloor map of high-resolution bathymetry, marine benthic habitats and geology within the 3-nautical-mile limit of California's State Waters. CSMP has divided coastal California into 110 map blocks, each to be published individually as United States Geological Survey Open-File Reports (OFRs) or Scientific Investigations Maps (SIMs) at a scale of 1:24,000. Maps display seafloor morphology and character, identify potential marine benthic habitats and illustrate both the seafloor geology and shallow (to about 100 m) subsurface geology. Data layers for bathymetry, bathymetric contours, acoustic backscatter, seafloor character, potential benthic habitat and offshore geology were created for each map block, as well as regional-scale data layers for sediment thickness, depth to transition, transgressive contours, isopachs, predicted distributions of benthic macro-invertebrates and visual observations of benthic habitat from video cruises over the entire state. This coverage can be used to aid in assessments and mitigation of geologic hazards in the coastal region and to provide sufficient geologic information for land-use and land-management decisions both onshore and offshore. These data are intended for science researchers, students, policy makers, and the general public. This information is not intended for navigational purposes.The data can be used with geographic information systems (GIS) software to display geologic and oceanographic information. Johnson, S.Y., Greene, H.G., Manson, M.W., Hartwell, S.R., Endris, C.A., and Watt, J.T. (2014). Backscatter C (7125): Offshore of Bolinas, California, 2010. California State Waters Map Series Data Catalog: U.S. Geological Survey Data Series 781. Available at: http://purl.stanford.edu/zy254qx0409. None This layer is presented in the WGS84 coordinate system for web display purposes. Downloadable data are provided in native coordinate system or projection.

    View full record

  2. Title: Bathymetry: Offshore of San Gregorio, California, 2007

    Contributors:

    Summary: This layer is a georeferenced raster image containing bathymetric data for the offshore area of San Gregorio, California. The bathymetric and shaded relief maps of the area were generated from data collected by Fugro Pelagos and by California State University, Monterey Bay (CSUMB). Mapping was completed in 2006 and 2007, using a combination of 400-kHz Reson 7125 and 244-kHz Reson 8101 multibeam echosounders. These mapping missions combined to collect bathymetry (sheets 1, 2) from about the 10-m isobath to beyond the 3-nautical-mile limit of California's State Waters. A map that shows these data is published in Scientific Investigations Map 3306, "California State Waters Map Series--Offshore of San Gregorio, California." This layer is part of USGS Data Series 781. In 2007, the California Ocean Protection Council initiated the California Seafloor Mapping Program (CSMP) to create a comprehensive seafloor map of high-resolution bathymetry, marine benthic habitats and geology within the 3-nautical-mile limit of California's State Waters. CSMP has divided coastal California into 110 map blocks, each to be published individually as United States Geological Survey Open-File Reports (OFRs) or Scientific Investigations Maps (SIMs) at a scale of 1:24,000. Maps display seafloor morphology and character, identify potential marine benthic habitats and illustrate both the seafloor geology and shallow (to about 100 m) subsurface geology. Data layers for bathymetry, bathymetric contours, acoustic backscatter, seafloor character, potential benthic habitat and offshore geology were created for each map block, as well as regional-scale data layers for sediment thickness, depth to transition, transgressive contours, isopachs, predicted distributions of benthic macro-invertebrates and visual observations of benthic habitat from video cruises over the entire state. This coverage can be used to to aid in assessments and mitigation of geologic hazards in the coastal region and to provide sufficient geologic information for land-use and land-management decisions both onshore and offshore. These data are intended for science researchers, students, policy makers, and the general public. This information is not intended for navigational purposes. U.S. Geological Survey. (2013). Bathymetry: Offshore of San Gregorio, California, 2007. California State Waters Map Series Data Catalog: U.S. Geological Survey Data Series 781. Available at: http://purl.stanford.edu/jq474qb2474. This layer is presented in the WGS84 coordinate system for web display purposes. Downloadable data are provided in native coordinate system or projection.

    View full record

  3. Title: Bathymetry: Offshore of San Francisco, California, 2008

    Contributors:

    Summary: This layer is a georeferenced raster image containing bathymetric data for the offshore area of San Francisco, California. The bathymetric and shaded relief maps of the area were generated from data collected by Fugro Pelagos and by California State University, Mapping was completed between 2004 and 2008, using a combination of 400-kHz Reson 7125 and 244-kHz Reson 8101 multibeam echosounders. These mapping missions combined to collect bathymetry (sheets 1, 2) from about the 10-m isobath to beyond the 3-nautical-mile limit of California's State Waters. A large portion of this map area was re-mapped in 2009, however the older bathymetry data were used in this map due to co-registered, acoustic backscatter data. NOTE: the horizontal datum of the bathymtry data (NAD83) differs from the horizontal datum of other layers in this SIM (WGS84). Some bathymetry grids within this map were projected horizontally from WGS84 to NAD83 using ESRI tools to be more consistent with the vertical reference of the North American Vertical Datum of 1988 (NAVD88). A map that shows these data is published in Open-File Report 2015-1068, "California State Waters Map Series--Offshore of San Francisco, California." This layer is part of USGS Data Series 781. In 2007, the California Ocean Protection Council initiated the California Seafloor Mapping Program (CSMP) to create a comprehensive seafloor map of high-resolution bathymetry, marine benthic habitats and geology within the 3-nautical-mile limit of California's State Waters. CSMP has divided coastal California into 110 map blocks, each to be published individually as United States Geological Survey Open-File Reports (OFRs) or Scientific Investigations Maps (SIMs) at a scale of 1:24,000. Maps display seafloor morphology and character, identify potential marine benthic habitats and illustrate both the seafloor geology and shallow (to about 100 m) subsurface geology. Data layers for bathymetry, bathymetric contours, acoustic backscatter, seafloor character, potential benthic habitat and offshore geology were created for each map block, as well as regional-scale data layers for sediment thickness, depth to transition, transgressive contours, isopachs, predicted distributions of benthic macro-invertebrates and visual observations of benthic habitat from video cruises over the entire state. This coverage can be used to to aid in assessments and mitigation of geologic hazards in the coastal region and to provide sufficient geologic information for land-use and land-management decisions both onshore and offshore. These data are intended for science researchers, students, policy makers, and the general public. This information is not intended for navigational purposes. Dartnell, P., Kvitek, R.G., and Bretz, C.K.. (2014). Bathymetry: Offshore of San Francisco, California, 2008. California State Waters Map Series Data Catalog: U.S. Geological Survey Data Series 781. Available at: http://purl.stanford.edu/sj511xg6228. This layer is presented in the WGS84 coordinate system for web display purposes. Downloadable data are provided in native coordinate system or projection.

    View full record

  4. Title: Backscatter E (Swath): Offshore of Bolinas, California, 2010

    Contributors:

    Summary: This layer is a georeferenced raster image containing acoustic-backscatter data for the offshore area of Bolinas, California. The acoustic-backscatter map was generated from data collected by California State University, Monterey Bay (CSUMB), by Fugro Pelagos, and by Moss Landing Marine Laboratory (MLML). Mapping was completed between 2004 and 2010, using a combination of 200-kHz and 400-kHz Reson 7125, and 244-kHz Reson 8101 multibeam echosounders, as well as 468-kHz SEA SWATHPlus and 250-kHz GeoSwath interferometric systems. Moss Landing Marine Laboratory mapped the nearshore region north of Bolinas in 2004 prior to the California Seafloor Mapping Program (CSMP). The nearshore region from south of Bolinas Lagoon to Stinson Beach was mapped by Fugro Pelagos in 2009 for a project outside of the CSMP and only bathymetry data were collected. Therefore, note that the shaded relief map coverage (see Bathymetry Hillshade--Offshore of Bolinas, California, DS 781) does not match the acoustic-backscatter map coverage (see Backscatter A-E--Offshore of Bolinas, California, DS 781). Within the acoustic-backscatter imagery, brighter tones indicate higher backscatter intensity, and darker tones indicate lower backscatter intensity. The intensity represents a complex interaction between the acoustic pulse and the seafloor, as well as characteristics within the shallow subsurface, providing a general indication of seafloor texture and sediment type. Backscatter intensity depends on the acoustic source level; the frequency used to image the seafloor; the grazing angle; the composition and character of the seafloor, including grain size, water content, bulk density, and seafloor roughness; and some biological cover. Harder and rougher bottom types such as rocky outcrops or coarse sediment typically return stronger intensities (high backscatter, lighter tones), whereas softer bottom types such as fine sediment return weaker intensities (low backscatter, darker tones). These data are not intended for navigational purposes. In 2007, the California Ocean Protection Council initiated the California Seafloor Mapping Program (CSMP) to create a comprehensive seafloor map of high-resolution bathymetry, marine benthic habitats and geology within the 3-nautical-mile limit of California's State Waters. CSMP has divided coastal California into 110 map blocks, each to be published individually as United States Geological Survey Open-File Reports (OFRs) or Scientific Investigations Maps (SIMs) at a scale of 1:24,000. Maps display seafloor morphology and character, identify potential marine benthic habitats and illustrate both the seafloor geology and shallow (to about 100 m) subsurface geology. Data layers for bathymetry, bathymetric contours, acoustic backscatter, seafloor character, potential benthic habitat and offshore geology were created for each map block, as well as regional-scale data layers for sediment thickness, depth to transition, transgressive contours, isopachs, predicted distributions of benthic macro-invertebrates and visual observations of benthic habitat from video cruises over the entire state. This coverage can be used to aid in assessments and mitigation of geologic hazards in the coastal region and to provide sufficient geologic information for land-use and land-management decisions both onshore and offshore. These data are intended for science researchers, students, policy makers, and the general public. This information is not intended for navigational purposes.The data can be used with geographic information systems (GIS) software to display geologic and oceanographic information. Dartnell, P., Kvitek, R.G., and Bretz, C.K. (2014). Backscatter E (Swath): Offshore of Bolinas, California, 2010. California State Waters Map Series Data Catalog: U.S. Geological Survey Data Series 781. Available at: http://purl.stanford.edu/bq650vv7464. None This layer is presented in the WGS84 coordinate system for web display purposes. Downloadable data are provided in native coordinate system or projection.

    View full record

  5. Title: Backscatter C (8101): Offshore of San Francisco, California, 2008

    Contributors:

    Summary: This layer is a georeferenced raster image containing acoustic-backscatter data for the offshore area of San Francisco, California. The acoustic-backscatter map of the area was generated from backscatter data collected by Fugro Pelagos and by California State University, Mapping was completed between 2004 and 2008, using a combination of 400-kHz Reson 7125 and 244-kHz Reson 8101 multibeam echosounders. Within the final imagery, brighter tones indicate higher backscatter intensity, and darker tones indicate lower backscatter intensity. The intensity represents a complex interaction between the acoustic pulse and the seafloor, as well as characteristics within the shallow subsurface, providing a general indication of seafloor texture and composition. Backscatter intensity depends on the acoustic source level; the frequency used to image the seafloor; the grazing angle; the composition and character of the seafloor, including grain size, water content, bulk density, and seafloor roughness; and some biological cover. Harder and rougher bottom types such as rocky outcrops or coarse sediment typically return stronger intensities (high backscatter, lighter tones), whereas softer bottom types such as fine sediment return weaker intensities (low backscatter, darker tones). A map that shows these data is published in Open-File Report 2015-1068, "California State Waters Map Series--Offshore of San Francisco, California." This layer is part of USGS Data Series 781. In 2007, the California Ocean Protection Council initiated the California Seafloor Mapping Program (CSMP) to create a comprehensive seafloor map of high-resolution bathymetry, marine benthic habitats and geology within the 3-nautical-mile limit of California's State Waters. CSMP has divided coastal California into 110 map blocks, each to be published individually as United States Geological Survey Open-File Reports (OFRs) or Scientific Investigations Maps (SIMs) at a scale of 1:24,000. Maps display seafloor morphology and character, identify potential marine benthic habitats and illustrate both the seafloor geology and shallow (to about 100 m) subsurface geology. Data layers for bathymetry, bathymetric contours, acoustic backscatter, seafloor character, potential benthic habitat and offshore geology were created for each map block, as well as regional-scale data layers for sediment thickness, depth to transition, transgressive contours, isopachs, predicted distributions of benthic macro-invertebrates and visual observations of benthic habitat from video cruises over the entire state. This coverage can be used to to aid in assessments and mitigation of geologic hazards in the coastal region and to provide sufficient geologic information for land-use and land-management decisions both onshore and offshore. These data are intended for science researchers, students, policy makers, and the general public. This information is not intended for navigational purposes.The data can be used with geographic information systems (GIS) software to display geologic and oceanographic information. Dartnell, P., Erdey, M.D., Kvitek, R.G., and Bretz, C.K. (2014). Backscatter C (8101): Offshore of San Francisco, California, 2008. California State Waters Map Series Data Catalog: U.S. Geological Survey Data Series 781. Available at: http://purl.stanford.edu/sn375qd1706. This layer is presented in the WGS84 coordinate system for web display purposes. Downloadable data are provided in native coordinate system or projection.

    View full record

  6. Title: Contours: Offshore of San Francisco, California, 2008

    Contributors:

    Summary: This line shapefile contains bathymetric contours at 10 meter intervals for the offshore area of San Francisco, California. This layer was generated from bathymetry data collected by Fugro Pelagos and by California State University, Monterey Bay, Seafloor Mapping Lab (CSUMB). Mapping was completed between 2004 and 2008, using a combination of 400-kHz Reson 7125 and 244-kHz Reson 8101 multibeam echosounders. These mapping missions combined to collect bathymetry from about the 10-m isobath to beyond the 3-nautical-mile limit of California's State Waters. Bathymetric contours at 10-m intervals were generated from the merged 2-m bathymetric surface. The most continuous contour segments were preserved while smaller segments and isolated island polygons were excluded from the final output. Contours were smoothed via a polynomial approximation with exponential kernel (PAEK) algorithm using a tolerance value of 60 m. The contours were then clipped to the boundary of the map area. These data are not intended for navigational purposes. A map that shows these data is published in Open-File Report 2015-1068, "California State Waters Map Series--Offshore of San Francisco, California." This layer is part of USGS Data Series 781. In 2007, the California Ocean Protection Council initiated the California Seafloor Mapping Program (CSMP) to create a comprehensive seafloor map of high-resolution bathymetry, marine benthic habitats and geology within the 3-nautical-mile limit of California's State Waters. CSMP has divided coastal California into 110 map blocks, each to be published individually as United States Geological Survey Open-File Reports (OFRs) or Scientific Investigations Maps (SIMs) at a scale of 1:24,000. Maps display seafloor morphology and character, identify potential marine benthic habitats and illustrate both the seafloor geology and shallow (to about 100 m) subsurface geology. Data layers for bathymetry, bathymetric contours, acoustic backscatter, seafloor character, potential benthic habitat and offshore geology were created for each map block, as well as regional-scale data layers for sediment thickness, depth to transition, transgressive contours, isopachs, predicted distributions of benthic macro-invertebrates and visual observations of benthic habitat from video cruises over the entire state. This coverage can be used to to aid in assessments and mitigation of geologic hazards in the coastal region and to provide sufficient geologic information for land-use and land-management decisions both onshore and offshore. These data are intended for science researchers, students, policy makers, and the general public. This information is not intended for navigational purposes.The data can be used with geographic information systems (GIS) software to display geologic and oceanographic information. Dartnell, P., Kvitek, R.G., and Bretz, C.K. (2014). Contours: Offshore of San Francisco, California, 2008. California State Waters Map Series Data Catalog: U.S. Geological Survey Data Series 781. Available at: http://purl.stanford.edu/qj154qf5227. This layer is presented in the WGS84 coordinate system for web display purposes. Downloadable data are provided in native coordinate system or projection.

    View full record

  7. Title: Bathymetry Hillshade: Offshore of Bolinas, California, 2010

    Contributors:

    Summary: This layer is a georeferenced raster image containing shaded relief data for the offshore area of Bolinas, California. The bathymetry and shaded-relief maps owere generated from data collected by California State University, Monterey Bay (CSUMB), by Fugro Pelagos, and by Moss Landing Marine Laboratory (MLML). Mapping was completed between 2004 and 2010, using a combination of 200-kHz and 400-kHz Reson 7125, and 244-kHz Reson 8101 multibeam echosounders, as well as 468-kHz SEA SWATHPlus and 250-kHz GeoSwath interferometric systems. Moss Landing Marine Laboratory mapped the nearshore region north of Bolinas in 2004 prior to the California Seafloor Mapping Program (CSMP). The nearshore region from south of Bolinas Lagoon to Stinson Beach was mapped by Fugro Pelagos in 2009 for a project outside of the CSMP and only bathymetry data were collected. These mapping missions combined to collect bathymetry from about the 10-m isobath to beyond the 3-nautical-mile limit of California's state waters. This layer is part of USGS Data Series 781. In 2007, the California Ocean Protection Council initiated the California Seafloor Mapping Program (CSMP) to create a comprehensive seafloor map of high-resolution bathymetry, marine benthic habitats and geology within the 3-nautical-mile limit of California's State Waters. CSMP has divided coastal California into 110 map blocks, each to be published individually as United States Geological Survey Open-File Reports (OFRs) or Scientific Investigations Maps (SIMs) at a scale of 1:24,000. Maps display seafloor morphology and character, identify potential marine benthic habitats and illustrate both the seafloor geology and shallow (to about 100 m) subsurface geology. Data layers for bathymetry, bathymetric contours, acoustic backscatter, seafloor character, potential benthic habitat and offshore geology were created for each map block, as well as regional-scale data layers for sediment thickness, depth to transition, transgressive contours, isopachs, predicted distributions of benthic macro-invertebrates and visual observations of benthic habitat from video cruises over the entire state. This coverage can be used with geographic information systems or other software to identify bathymetric features. These data are intended for science researchers, students, policy makers, and the general public. This information is not intended for navigational purposes.The data can be used with geographic information systems (GIS) software to display geologic and oceanographic information. Dartnell, P., Kvitek, R.G., and Bretz, C.K. (2014). Bathymetry Hillshade: Offshore of Bolinas, California, 2010. California State Waters Map Series Data Catalog: U.S. Geological Survey Data Series 781. Available at: http://purl.stanford.edu/xk054fd3974. None This layer is presented in the WGS84 coordinate system for web display purposes. Downloadable data are provided in native coordinate system or projection.

    View full record

  8. Title: Contours (10m): Offshore of Bolinas, California, 2010

    Contributors:

    Summary: This line shapefile contains bathymetric contours at 10 meter intervals for the offshore area of Bolinas, California. These contours were generated from bathymetry data collected by California State University, Monterey Bay (CSUMB), by Fugro Pelagos, and by Moss Landing Marine Laboratory (MLML). Mapping was completed between 2004 and 2010, using a combination of 200-kHz and 400-kHz Reson 7125, and 244-kHz Reson 8101 multibeam echosounders, as well as 468-kHz SEA SWATHPlus and 250-kHz GeoSwath interferometric systems. These mapping missions combined to collect bathymetry from about the 10-m isobath to beyond the 3-nautical-mile limit of Californiaís State Waters. Bathymetric contours at 10-m intervals were generated from a modified 10-m bathymetric surface. The most continuous contour segments were preserved while smaller segments and isolated island polygons were excluded from the final output. Contours were smoothed via a polynomial approximation with exponential kernel (PAEK) algorithm using a tolerance value of 60 m. The contours were then clipped to the boundary of the map area. These data are not intended for navigational purposes. In 2007, the California Ocean Protection Council initiated the California Seafloor Mapping Program (CSMP) to create a comprehensive seafloor map of high-resolution bathymetry, marine benthic habitats and geology within the 3-nautical-mile limit of California's State Waters. CSMP has divided coastal California into 110 map blocks, each to be published individually as United States Geological Survey Open-File Reports (OFRs) or Scientific Investigations Maps (SIMs) at a scale of 1:24,000. Maps display seafloor morphology and character, identify potential marine benthic habitats and illustrate both the seafloor geology and shallow (to about 100 m) subsurface geology. Data layers for bathymetry, bathymetric contours, acoustic backscatter, seafloor character, potential benthic habitat and offshore geology were created for each map block, as well as regional-scale data layers for sediment thickness, depth to transition, transgressive contours, isopachs, predicted distributions of benthic macro-invertebrates and visual observations of benthic habitat from video cruises over the entire state. This coverage can be used with geographic information systems or other software to identify bathymetric features. These data are intended for science researchers, students, policy makers, and the general public. This information is not intended for navigational purposes.The data can be used with geographic information systems (GIS) software to display geologic and oceanographic information. Dartnell, P., Kvitek, R.G., and Bretz, C.K. (2014). Contours (10m): Offshore of Bolinas, California, 2010. California State Waters Map Series Data Catalog: U.S. Geological Survey Data Series 781. Available at: http://purl.stanford.edu/qt446tn6133. This layer is presented in the WGS84 coordinate system for web display purposes. Downloadable data are provided in native coordinate system or projection.

    View full record

  9. Title: Backscatter D (7125): Offshore of San Francisco, California, 2006

    Contributors:

    Summary: This layer is a georeferenced raster image containing acoustic-backscatter data for the offshore area of San Francisco, California. The acoustic-backscatter map of the area was generated from backscatter data collected by Fugro Pelagos and by California State University, Mapping was completed between 2004 and 2008, using a combination of 400-kHz Reson 7125 and 244-kHz Reson 8101 multibeam echosounders. Within the final imagery, brighter tones indicate higher backscatter intensity, and darker tones indicate lower backscatter intensity. The intensity represents a complex interaction between the acoustic pulse and the seafloor, as well as characteristics within the shallow subsurface, providing a general indication of seafloor texture and composition. Backscatter intensity depends on the acoustic source level; the frequency used to image the seafloor; the grazing angle; the composition and character of the seafloor, including grain size, water content, bulk density, and seafloor roughness; and some biological cover. Harder and rougher bottom types such as rocky outcrops or coarse sediment typically return stronger intensities (high backscatter, lighter tones), whereas softer bottom types such as fine sediment return weaker intensities (low backscatter, darker tones). A map that shows these data is published in Open-File Report 2015-1068, "California State Waters Map Series--Offshore of San Francisco, California." This layer is part of USGS Data Series 781. In 2007, the California Ocean Protection Council initiated the California Seafloor Mapping Program (CSMP) to create a comprehensive seafloor map of high-resolution bathymetry, marine benthic habitats and geology within the 3-nautical-mile limit of California's State Waters. CSMP has divided coastal California into 110 map blocks, each to be published individually as United States Geological Survey Open-File Reports (OFRs) or Scientific Investigations Maps (SIMs) at a scale of 1:24,000. Maps display seafloor morphology and character, identify potential marine benthic habitats and illustrate both the seafloor geology and shallow (to about 100 m) subsurface geology. Data layers for bathymetry, bathymetric contours, acoustic backscatter, seafloor character, potential benthic habitat and offshore geology were created for each map block, as well as regional-scale data layers for sediment thickness, depth to transition, transgressive contours, isopachs, predicted distributions of benthic macro-invertebrates and visual observations of benthic habitat from video cruises over the entire state. This coverage can be used to to aid in assessments and mitigation of geologic hazards in the coastal region and to provide sufficient geologic information for land-use and land-management decisions both onshore and offshore. These data are intended for science researchers, students, policy makers, and the general public. This information is not intended for navigational purposes.The data can be used with geographic information systems (GIS) software to display geologic and oceanographic information. Dartnell, P., Erdey, M.D., Kvitek, R.G., and Bretz, C.K. (2014). Backscatter D (7125): Offshore of San Francisco, California, 2006. California State Waters Map Series Data Catalog: U.S. Geological Survey Data Series 781. Available at: http://purl.stanford.edu/cx056zw9934. This layer is presented in the WGS84 coordinate system for web display purposes. Downloadable data are provided in native coordinate system or projection.

    View full record

  10. Title: Backscatter A (8101): Offshore of Bolinas, California, 2004

    Contributors:

    Summary: This layer is a georeferenced raster image containing acoustic-backscatter data for the offshore area of Bolinas, California. The acoustic-backscatter map was generated from data collected by California State University, Monterey Bay (CSUMB), by Fugro Pelagos, and by Moss Landing Marine Laboratory (MLML). Mapping was completed between 2004 and 2010, using a combination of 200-kHz and 400-kHz Reson 7125, and 244-kHz Reson 8101 multibeam echosounders, as well as 468-kHz SEA SWATHPlus and 250-kHz GeoSwath interferometric systems. Moss Landing Marine Laboratory mapped the nearshore region north of Bolinas in 2004 prior to the California Seafloor Mapping Program (CSMP). The nearshore region from south of Bolinas Lagoon to Stinson Beach was mapped by Fugro Pelagos in 2009 for a project outside of the CSMP and only bathymetry data were collected. Therefore, note that the shaded relief map coverage (see Bathymetry Hillshade--Offshore of Bolinas, California, DS 781) does not match the acoustic-backscatter map coverage (see Backscatter A-E--Offshore of Bolinas, California, DS 781). Within the acoustic-backscatter imagery, brighter tones indicate higher backscatter intensity, and darker tones indicate lower backscatter intensity. The intensity represents a complex interaction between the acoustic pulse and the seafloor, as well as characteristics within the shallow subsurface, providing a general indication of seafloor texture and sediment type. Backscatter intensity depends on the acoustic source level; the frequency used to image the seafloor; the grazing angle; the composition and character of the seafloor, including grain size, water content, bulk density, and seafloor roughness; and some biological cover. Harder and rougher bottom types such as rocky outcrops or coarse sediment typically return stronger intensities (high backscatter, lighter tones), whereas softer bottom types such as fine sediment return weaker intensities (low backscatter, darker tones). These data are not intended for navigational purposes. This layer is part of USGS Data Series 781. In 2007, the California Ocean Protection Council initiated the California Seafloor Mapping Program (CSMP) to create a comprehensive seafloor map of high-resolution bathymetry, marine benthic habitats and geology within the 3-nautical-mile limit of California's State Waters. CSMP has divided coastal California into 110 map blocks, each to be published individually as United States Geological Survey Open-File Reports (OFRs) or Scientific Investigations Maps (SIMs) at a scale of 1:24,000. Maps display seafloor morphology and character, identify potential marine benthic habitats and illustrate both the seafloor geology and shallow (to about 100 m) subsurface geology. Data layers for bathymetry, bathymetric contours, acoustic backscatter, seafloor character, potential benthic habitat and offshore geology were created for each map block, as well as regional-scale data layers for sediment thickness, depth to transition, transgressive contours, isopachs, predicted distributions of benthic macro-invertebrates and visual observations of benthic habitat from video cruises over the entire state. This coverage can be used to aid in assessments and mitigation of geologic hazards in the coastal region and to provide sufficient geologic information for land-use and land-management decisions both onshore and offshore. These data are intended for science researchers, students, policy makers, and the general public. This information is not intended for navigational purposes.The data can be used with geographic information systems (GIS) software to display geologic and oceanographic information. Dartnell, P., Kvitek, R.G., and Bretz, C.K. (2014). Backscatter A (8101): Offshore of Bolinas, California, 2004. California State Waters Map Series Data Catalog: U.S. Geological Survey Data Series 781. Available at: http://purl.stanford.edu/kv451wx8026. None This layer is presented in the WGS84 coordinate system for web display purposes. Downloadable data are provided in native coordinate system or projection.

    View full record

  11. Title: Backscatter B (8101): Offshore of Bolinas, California, 2007

    Contributors:

    Summary: This layer is a georeferenced raster image containing acoustic-backscatter data for the offshore area of Bolinas, California. The acoustic-backscatter map was generated from data collected by California State University, Monterey Bay (CSUMB), by Fugro Pelagos, and by Moss Landing Marine Laboratory (MLML). Mapping was completed between 2004 and 2010, using a combination of 200-kHz and 400-kHz Reson 7125, and 244-kHz Reson 8101 multibeam echosounders, as well as 468-kHz SEA SWATHPlus and 250-kHz GeoSwath interferometric systems. Moss Landing Marine Laboratory mapped the nearshore region north of Bolinas in 2004 prior to the California Seafloor Mapping Program (CSMP). The nearshore region from south of Bolinas Lagoon to Stinson Beach was mapped by Fugro Pelagos in 2009 for a project outside of the CSMP and only bathymetry data were collected. Therefore, note that the shaded relief map coverage (see Bathymetry Hillshade--Offshore of Bolinas, California, DS 781) does not match the acoustic-backscatter map coverage (see Backscatter A-E--Offshore of Bolinas, California, DS 781). Within the acoustic-backscatter imagery, brighter tones indicate higher backscatter intensity, and darker tones indicate lower backscatter intensity. The intensity represents a complex interaction between the acoustic pulse and the seafloor, as well as characteristics within the shallow subsurface, providing a general indication of seafloor texture and sediment type. Backscatter intensity depends on the acoustic source level; the frequency used to image the seafloor; the grazing angle; the composition and character of the seafloor, including grain size, water content, bulk density, and seafloor roughness; and some biological cover. Harder and rougher bottom types such as rocky outcrops or coarse sediment typically return stronger intensities (high backscatter, lighter tones), whereas softer bottom types such as fine sediment return weaker intensities (low backscatter, darker tones). These data are not intended for navigational purposes. This layer is part of USGS Data Series 781. In 2007, the California Ocean Protection Council initiated the California Seafloor Mapping Program (CSMP) to create a comprehensive seafloor map of high-resolution bathymetry, marine benthic habitats and geology within the 3-nautical-mile limit of California's State Waters. CSMP has divided coastal California into 110 map blocks, each to be published individually as United States Geological Survey Open-File Reports (OFRs) or Scientific Investigations Maps (SIMs) at a scale of 1:24,000. Maps display seafloor morphology and character, identify potential marine benthic habitats and illustrate both the seafloor geology and shallow (to about 100 m) subsurface geology. Data layers for bathymetry, bathymetric contours, acoustic backscatter, seafloor character, potential benthic habitat and offshore geology were created for each map block, as well as regional-scale data layers for sediment thickness, depth to transition, transgressive contours, isopachs, predicted distributions of benthic macro-invertebrates and visual observations of benthic habitat from video cruises over the entire state. This coverage can be used to aid in assessments and mitigation of geologic hazards in the coastal region and to provide sufficient geologic information for land-use and land-management decisions both onshore and offshore. These data are intended for science researchers, students, policy makers, and the general public. This information is not intended for navigational purposes.The data can be used with geographic information systems (GIS) software to display geologic and oceanographic information. Dartnell, P., Kvitek, R.G., and Bretz, C.K. (2014). Backscatter B (8101): Offshore of Bolinas, California, 2007. California State Waters Map Series Data Catalog: U.S. Geological Survey Data Series 781. Available at: http://purl.stanford.edu/zg712pr8473. This layer is presented in the WGS84 coordinate system for web display purposes. Downloadable data are provided in native coordinate system or projection.

    View full record

  12. Title: Bathymetry Hillshade: Offshore of San Francisco, California, 2008

    Contributors:

    Summary: This layer is a georeferenced raster image containing shaded relief (hillshade) data for the offshore area of San Francisco, California. The bathymetric and shaded relief maps of the area were generated from data collected by Fugro Pelagos and by California State University, Mapping was completed between 2004 and 2008, using a combination of 400-kHz Reson 7125 and 244-kHz Reson 8101 multibeam echosounders. These mapping missions combined to collect bathymetry (sheets 1, 2) from about the 10-m isobath to beyond the 3-nautical-mile limit of California's State Waters. A large portion of this map area was re-mapped in 2009, however the older bathymetry data were used in this map due to co-registered, acoustic backscatter data. A map that shows these data is published in Open-File Report 2015-1068, "California State Waters Map Series--Offshore of San Francisco, California." This layer is part of USGS Data Series 781. In 2007, the California Ocean Protection Council initiated the California Seafloor Mapping Program (CSMP) to create a comprehensive seafloor map of high-resolution bathymetry, marine benthic habitats and geology within the 3-nautical-mile limit of California's State Waters. CSMP has divided coastal California into 110 map blocks, each to be published individually as United States Geological Survey Open-File Reports (OFRs) or Scientific Investigations Maps (SIMs) at a scale of 1:24,000. Maps display seafloor morphology and character, identify potential marine benthic habitats and illustrate both the seafloor geology and shallow (to about 100 m) subsurface geology. Data layers for bathymetry, bathymetric contours, acoustic backscatter, seafloor character, potential benthic habitat and offshore geology were created for each map block, as well as regional-scale data layers for sediment thickness, depth to transition, transgressive contours, isopachs, predicted distributions of benthic macro-invertebrates and visual observations of benthic habitat from video cruises over the entire state. This coverage can be used to to aid in assessments and mitigation of geologic hazards in the coastal region and to provide sufficient geologic information for land-use and land-management decisions both onshore and offshore. These data are intended for science researchers, students, policy makers, and the general public. This information is not intended for navigational purposes. Dartnell, P., Kvitek, R.G., and Bretz, C.K. (2014). Bathymetry Hillshade: Offshore of San Francisco, California, 2008. California State Waters Map Series Data Catalog: U.S. Geological Survey Data Series 781. Available at: http://purl.stanford.edu/rc243mn3658. This layer is presented in the WGS84 coordinate system for web display purposes. Downloadable data are provided in native coordinate system or projection.

    View full record

  13. Title: Bathymetry: Offshore of Bolinas, California, 2010

    Contributors:

    Summary: This layer is a georeferenced raster image containing bathymetric data for the offshore area of Bolinas, California. The bathymetry and shaded-relief maps were generated from data collected by California State University, Monterey Bay (CSUMB), by Fugro Pelagos, and by Moss Landing Marine Laboratory (MLML). Mapping was completed between 2004 and 2010, using a combination of 200-kHz and 400-kHz Reson 7125, and 244-kHz Reson 8101 multibeam echosounders, as well as 468-kHz SEA SWATHPlus and 250-kHz GeoSwath interferometric systems. Moss Landing Marine Laboratory mapped the nearshore region north of Bolinas in 2004 prior to the California Seafloor Mapping Program (CSMP). The nearshore region from south of Bolinas Lagoon to Stinson Beach was mapped by Fugro Pelagos in 2009 for a project outside of the CSMP and only bathymetry data were collected. These mapping missions combined to collect bathymetry from about the 10-m isobath to beyond the 3-nautical-mile limit of Californiaís State Waters. NOTE: the horizontal datum of the bathymtry data (NAD83) differs from the horizontal datum of other layers in this data series (WGS84). Some bathymetry grids within this map were projected horizontally from WGS84 to NAD83 using ESRI tools to be more consistent with the vertical reference of the North American Vertical Datum of 1988 (NAVD88). These data are not intended for navigational purposes. In 2007, the California Ocean Protection Council initiated the California Seafloor Mapping Program (CSMP) to create a comprehensive seafloor map of high-resolution bathymetry, marine benthic habitats and geology within the 3-nautical-mile limit of California's State Waters. CSMP has divided coastal California into 110 map blocks, each to be published individually as United States Geological Survey Open-File Reports (OFRs) or Scientific Investigations Maps (SIMs) at a scale of 1:24,000. Maps display seafloor morphology and character, identify potential marine benthic habitats and illustrate both the seafloor geology and shallow (to about 100 m) subsurface geology. Data layers for bathymetry, bathymetric contours, acoustic backscatter, seafloor character, potential benthic habitat and offshore geology were created for each map block, as well as regional-scale data layers for sediment thickness, depth to transition, transgressive contours, isopachs, predicted distributions of benthic macro-invertebrates and visual observations of benthic habitat from video cruises over the entire state. These data are intended for science researchers, students, policy makers, and the general public. This information is not intended for navigational purposes.The data can be used with geographic information systems (GIS) software to display geologic and oceanographic information. Dartnell, P., Kvitek, R.G., and Bretz, C.K. (2014). Bathymetry: Offshore of Bolinas, California, 2010. California State Waters Map Series Data Catalog: U.S. Geological Survey Data Series 781. Available at: http://purl.stanford.edu/xj604hz8439. None This layer is presented in the WGS84 coordinate system for web display purposes. Downloadable data are provided in native coordinate system or projection.

    View full record

  14. Title: Backscatter A (8101): Offshore of San Francisco, California, 2004

    Contributors:

    Summary: This layer is a georeferenced raster image containing acoustic-backscatter data for the offshore area of San Francisco, California. The acoustic-backscatter map of the area was generated from backscatter data collected by Fugro Pelagos and by California State University, Monterey Bay (CSUMB). Mapping was completed between 2004 and 2008, using a combination of 400-kHz Reson 7125 and 244-kHz Reson 8101 multibeam echosounders. Within the final imagery, brighter tones indicate higher backscatter intensity, and darker tones indicate lower backscatter intensity. The intensity represents a complex interaction between the acoustic pulse and the seafloor, as well as characteristics within the shallow subsurface, providing a general indication of seafloor texture and composition. Backscatter intensity depends on the acoustic source level; the frequency used to image the seafloor; the grazing angle; the composition and character of the seafloor, including grain size, water content, bulk density, and seafloor roughness; and some biological cover. Harder and rougher bottom types such as rocky outcrops or coarse sediment typically return stronger intensities (high backscatter, lighter tones), whereas softer bottom types such as fine sediment return weaker intensities (low backscatter, darker tones). A map that shows these data is published in Open-File Report 2015-1068, "California State Waters Map Series--Offshore of San Francisco, California." This layer is part of USGS Data Series 781. In 2007, the California Ocean Protection Council initiated the California Seafloor Mapping Program (CSMP) to create a comprehensive seafloor map of high-resolution bathymetry, marine benthic habitats and geology within the 3-nautical-mile limit of California's State Waters. CSMP has divided coastal California into 110 map blocks, each to be published individually as United States Geological Survey Open-File Reports (OFRs) or Scientific Investigations Maps (SIMs) at a scale of 1:24,000. Maps display seafloor morphology and character, identify potential marine benthic habitats and illustrate both the seafloor geology and shallow (to about 100 m) subsurface geology. Data layers for bathymetry, bathymetric contours, acoustic backscatter, seafloor character, potential benthic habitat and offshore geology were created for each map block, as well as regional-scale data layers for sediment thickness, depth to transition, transgressive contours, isopachs, predicted distributions of benthic macro-invertebrates and visual observations of benthic habitat from video cruises over the entire state. This coverage can be used to to aid in assessments and mitigation of geologic hazards in the coastal region and to provide sufficient geologic information for land-use and land-management decisions both onshore and offshore. These data are intended for science researchers, students, policy makers, and the general public. This information is not intended for navigational purposes.The data can be used with geographic information systems (GIS) software to display geologic and oceanographic information. Dartnell, P., Erdey, M.D., Kvitek, R.G., and Bretz, C.K. (2014). Backscatter A (8101): Offshore of San Francisco, California, 2004. California State Waters Map Series Data Catalog: U.S. Geological Survey Data Series 781. Available at: http://purl.stanford.edu/kn551fj5393. This layer is presented in the WGS84 coordinate system for web display purposes. Downloadable data are provided in native coordinate system or projection.

    View full record

  15. Title: Backscatter B (8101): Offshore of San Francisco, California, 2007

    Contributors:

    Summary: This layer is a georeferenced raster image containing acoustic-backscatter data for the offshore area of San Francisco, California. The acoustic-backscatter map of the area was generated from backscatter data collected by Fugro Pelagos and by California State University, Monterey Bay (CSUMB). Mapping was completed between 2004 and 2008, using a combination of 400-kHz Reson 7125 and 244-kHz Reson 8101 multibeam echosounders. Within the final imagery, brighter tones indicate higher backscatter intensity, and darker tones indicate lower backscatter intensity. The intensity represents a complex interaction between the acoustic pulse and the seafloor, as well as characteristics within the shallow subsurface, providing a general indication of seafloor texture and composition. Backscatter intensity depends on the acoustic source level; the frequency used to image the seafloor; the grazing angle; the composition and character of the seafloor, including grain size, water content, bulk density, and seafloor roughness; and some biological cover. Harder and rougher bottom types such as rocky outcrops or coarse sediment typically return stronger intensities (high backscatter, lighter tones), whereas softer bottom types such as fine sediment return weaker intensities (low backscatter, darker tones). A map that shows these data is published in Open-File Report 2015-1068, "California State Waters Map Series--Offshore of San Francisco, California." This layer is part of USGS Data Series 781. In 2007, the California Ocean Protection Council initiated the California Seafloor Mapping Program (CSMP) to create a comprehensive seafloor map of high-resolution bathymetry, marine benthic habitats and geology within the 3-nautical-mile limit of California's State Waters. CSMP has divided coastal California into 110 map blocks, each to be published individually as United States Geological Survey Open-File Reports (OFRs) or Scientific Investigations Maps (SIMs) at a scale of 1:24,000. Maps display seafloor morphology and character, identify potential marine benthic habitats and illustrate both the seafloor geology and shallow (to about 100 m) subsurface geology. Data layers for bathymetry, bathymetric contours, acoustic backscatter, seafloor character, potential benthic habitat and offshore geology were created for each map block, as well as regional-scale data layers for sediment thickness, depth to transition, transgressive contours, isopachs, predicted distributions of benthic macro-invertebrates and visual observations of benthic habitat from video cruises over the entire state. This coverage can be used to to aid in assessments and mitigation of geologic hazards in the coastal region and to provide sufficient geologic information for land-use and land-management decisions both onshore and offshore. These data are intended for science researchers, students, policy makers, and the general public. This information is not intended for navigational purposes.The data can be used with geographic information systems (GIS) software to display geologic and oceanographic information. U.S. Geological Survey. (2013). Backscatter B (8101): Offshore of San Francisco, California, 2007. California State Waters Map Series Data Catalog: U.S. Geological Survey Data Series 781. Available at: http://purl.stanford.edu/ps571jm7181. This layer is presented in the WGS84 coordinate system for web display purposes. Downloadable data are provided in native coordinate system or projection.

    View full record

  16. Title: Contours (10m): Offshore of Pacifica, California, 2007

    Contributors:

    Summary: This line shapefile contains bathymetric contours at 10-meter intervals for the offshore area of Pacifica, California. These data were generated from data collected by California State University, Monterey Bay, Seafloor Mapping Lab (CSUMB), by the U.S. Geological Survey (USGS) and by Fugro Pelagos. Mapping was completed between 2005 and 2007, using a combination of 400-kHz Reson 7125 and 244-kHz Reson 8101 multibeam echosounders. These mapping missions combined to collect bathymetry from about the 10-m isobath to beyond the 3-nautical-mile limit of California's State Waters. Bathymetric contours at 10-m intervals were generated from the merged 2-m bathymetric surface. The most continuous contour segments were preserved while smaller segments and isolated island polygons were excluded from the final output. Contours were smoothed via a polynomial approximation with exponential kernel (PAEK) algorithm using a tolerance value of 60 m. The contours were then clipped to the boundary of the map area. These data are not intended for navigational purposes. A map which shows these data is published in Scientific Investigations Map 3302, "California State Waters Map Series--Offshore of Coal Oil Point, California." This layer is part of USGS Data Series 781. In 2007, the California Ocean Protection Council initiated the California Seafloor Mapping Program (CSMP) to create a comprehensive seafloor map of high-resolution bathymetry, marine benthic habitats and geology within the 3-nautical-mile limit of California's State Waters. CSMP has divided coastal California into 110 map blocks, each to be published individually as United States Geological Survey Open-File Reports (OFRs) or Scientific Investigations Maps (SIMs) at a scale of 1:24,000. Maps display seafloor morphology and character, identify potential marine benthic habitats and illustrate both the seafloor geology and shallow (to about 100 m) subsurface geology. Data layers for bathymetry, bathymetric contours, acoustic backscatter, seafloor character, potential benthic habitat and offshore geology were created for each map block, as well as regional-scale data layers for sediment thickness, depth to transition, transgressive contours, isopachs, predicted distributions of benthic macro-invertebrates and visual observations of benthic habitat from video cruises over the entire state. These data are intended for science researchers, students, policy makers, and the general public. This information is not intended for navigational purposes.The data can be used with geographic information systems (GIS) software to display geologic and oceanographic information. Bretz, C.K., Kvitek, R.G., Dartnell, P., Phillips, E.L. (2014). Contours (10m): Offshore of Pacifica, California, 2007. California State Waters Map Series Data Catalog: U.S. Geological Survey Data Series 781. Available at: http://purl.stanford.edu/rr531pm2470. This layer is presented in the WGS84 coordinate system for web display purposes. Downloadable data are provided in native coordinate system or projection.

    View full record

  17. Title: Backscatter D (Snippets): Offshore of Bolinas. California, 2007

    Contributors:

    Summary: This layer is a georeferenced raster image containing acoustic-backscatter data for the offshore area of Bolinas, California. The acoustic-backscatter map was generated from data collected by California State University, Monterey Bay (CSUMB), by Fugro Pelagos, and by Moss Landing Marine Laboratory (MLML). Mapping was completed between 2004 and 2010, using a combination of 200-kHz and 400-kHz Reson 7125, and 244-kHz Reson 8101 multibeam echosounders, as well as 468-kHz SEA SWATHPlus and 250-kHz GeoSwath interferometric systems. Moss Landing Marine Laboratory mapped the nearshore region north of Bolinas in 2004 prior to the California Seafloor Mapping Program (CSMP). The nearshore region from south of Bolinas Lagoon to Stinson Beach was mapped by Fugro Pelagos in 2009 for a project outside of the CSMP and only bathymetry data were collected. Therefore, note that the shaded relief map coverage (see Bathymetry Hillshade--Offshore of Bolinas, California, DS 781) does not match the acoustic-backscatter map coverage (see Backscatter A-E--Offshore of Bolinas, California, DS 781). Within the acoustic-backscatter imagery, brighter tones indicate higher backscatter intensity, and darker tones indicate lower backscatter intensity. The intensity represents a complex interaction between the acoustic pulse and the seafloor, as well as characteristics within the shallow subsurface, providing a general indication of seafloor texture and sediment type. Backscatter intensity depends on the acoustic source level; the frequency used to image the seafloor; the grazing angle; the composition and character of the seafloor, including grain size, water content, bulk density, and seafloor roughness; and some biological cover. Harder and rougher bottom types such as rocky outcrops or coarse sediment typically return stronger intensities (high backscatter, lighter tones), whereas softer bottom types such as fine sediment return weaker intensities (low backscatter, darker tones). These data are not intended for navigational purposes. In 2007, the California Ocean Protection Council initiated the California Seafloor Mapping Program (CSMP) to create a comprehensive seafloor map of high-resolution bathymetry, marine benthic habitats and geology within the 3-nautical-mile limit of California's State Waters. CSMP has divided coastal California into 110 map blocks, each to be published individually as United States Geological Survey Open-File Reports (OFRs) or Scientific Investigations Maps (SIMs) at a scale of 1:24,000. Maps display seafloor morphology and character, identify potential marine benthic habitats and illustrate both the seafloor geology and shallow (to about 100 m) subsurface geology. Data layers for bathymetry, bathymetric contours, acoustic backscatter, seafloor character, potential benthic habitat and offshore geology were created for each map block, as well as regional-scale data layers for sediment thickness, depth to transition, transgressive contours, isopachs, predicted distributions of benthic macro-invertebrates and visual observations of benthic habitat from video cruises over the entire state. This coverage can be used to aid in assessments and mitigation of geologic hazards in the coastal region and to provide sufficient geologic information for land-use and land-management decisions both onshore and offshore. These data are intended for science researchers, students, policy makers, and the general public. This information is not intended for navigational purposes.The data can be used with geographic information systems (GIS) software to display geologic and oceanographic information. Dartnell, P., Kvitek, R.G., and Bretz, C.K. (2014). Backscatter D (Snippets): Offshore of Bolinas. California, 2007. California State Waters Map Series Data Catalog: U.S. Geological Survey Data Series 781. Available at: http://purl.stanford.edu/vf440ck4906. None This layer is presented in the WGS84 coordinate system for web display purposes. Downloadable data are provided in native coordinate system or projection.

    View full record

  18. Title: Bathymetry Hillshade: Offshore of San Gregorio, California, 2007

    Contributors:

    Summary: This layer is a georeferenced raster image containing shaded relief (hillshade) data for the offshore area of San Gregorio, California. The bathymetric and shaded relief maps of the area were generated from data collected by Fugro Pelagos and by California State University, Monterey Bay (CSUMB). Mapping was completed in 2006 and 2007, using a combination of 400-kHz Reson 7125 and 244-kHz Reson 8101 multibeam echosounders. These mapping missions combined to collect bathymetry (sheets 1, 2) from about the 10-m isobath to beyond the 3-nautical-mile limit of CaliforniaÕs State Waters. A map that shows these data is published in Scientific Investigations Map 3306, "California State Waters Map Series--Offshore of San Gregorio, California." This layer is part of USGS Data Series 781. In 2007, the California Ocean Protection Council initiated the California Seafloor Mapping Program (CSMP) to create a comprehensive seafloor map of high-resolution bathymetry, marine benthic habitats and geology within the 3-nautical-mile limit of California's State Waters. CSMP has divided coastal California into 110 map blocks, each to be published individually as United States Geological Survey Open-File Reports (OFRs) or Scientific Investigations Maps (SIMs) at a scale of 1:24,000. Maps display seafloor morphology and character, identify potential marine benthic habitats and illustrate both the seafloor geology and shallow (to about 100 m) subsurface geology. Data layers for bathymetry, bathymetric contours, acoustic backscatter, seafloor character, potential benthic habitat and offshore geology were created for each map block, as well as regional-scale data layers for sediment thickness, depth to transition, transgressive contours, isopachs, predicted distributions of benthic macro-invertebrates and visual observations of benthic habitat from video cruises over the entire state. This coverage can be used to to aid in assessments and mitigation of geologic hazards in the coastal region and to provide sufficient geologic information for land-use and land-management decisions both onshore and offshore. These data are intended for science researchers, students, policy makers, and the general public. This information is not intended for navigational purposes. U.S. Geological Survey. (2013). Bathymetry Hillshade: Offshore of San Gregorio, California, 2007. California State Waters Map Series Data Catalog: U.S. Geological Survey Data Series 781. Available at: http://purl.stanford.edu/rw112wj9918. This layer is presented in the WGS84 coordinate system for web display purposes. Downloadable data are provided in native coordinate system or projection.

    View full record

  19. Title: Backscatter B (7125): Offshore of San Gregorio, California, 2007

    Contributors:

    Summary: This layer is a georeferenced raster image containing acoustic-backscatter data for the offshore area of San Gregorio, California. The acoustic-backscatter map of the area was generated from data collected by Fugro Pelagos and by California State University, Monterey Bay (CSUMB). Mapping was completed in 2006 and 2007, using a combination of 400-kHz Reson 7125 and 244-kHz Reson 8101 multibeam echosounders. Within the final imagery, brighter tones indicate higher backscatter intensity, and darker tones indicate lower backscatter intensity. The intensity represents a complex interaction between the acoustic pulse and the seafloor, as well as characteristics within the shallow subsurface, providing a general indication of seafloor texture and composition. Backscatter intensity depends on the acoustic source level; the frequency used to image the seafloor; the grazing angle; the composition and character of the seafloor, including grain size, water content, bulk density, and seafloor roughness; and some biological cover. Harder and rougher bottom types such as rocky outcrops or coarse sediment typically return stronger intensities (high backscatter, lighter tones), whereas softer bottom types such as fine sediment return weaker intensities (low backscatter, darker tones). A map that shows these data is published in Scientific Investigations Map 3306, "California State Waters Map Series--Offshore of San Gregorio, California." This layer is part of USGS Data Series 781. In 2007, the California Ocean Protection Council initiated the California Seafloor Mapping Program (CSMP) to create a comprehensive seafloor map of high-resolution bathymetry, marine benthic habitats and geology within the 3-nautical-mile limit of California's State Waters. CSMP has divided coastal California into 110 map blocks, each to be published individually as United States Geological Survey Open-File Reports (OFRs) or Scientific Investigations Maps (SIMs) at a scale of 1:24,000. Maps display seafloor morphology and character, identify potential marine benthic habitats and illustrate both the seafloor geology and shallow (to about 100 m) subsurface geology. Data layers for bathymetry, bathymetric contours, acoustic backscatter, seafloor character, potential benthic habitat and offshore geology were created for each map block, as well as regional-scale data layers for sediment thickness, depth to transition, transgressive contours, isopachs, predicted distributions of benthic macro-invertebrates and visual observations of benthic habitat from video cruises over the entire state. This coverage can be used to to aid in assessments and mitigation of geologic hazards in the coastal region and to provide sufficient geologic information for land-use and land-management decisions both onshore and offshore. These data are intended for science researchers, students, policy makers, and the general public. This information is not intended for navigational purposes.The data can be used with geographic information systems (GIS) software to display geologic and oceanographic information. U.S. Geological Survey. (2013). Backscatter B (7125): Offshore of San Gregorio, California, 2007. California State Waters Map Series Data Catalog: U.S. Geological Survey Data Series 781. Available at: http://purl.stanford.edu/dw763yf4457. This layer is presented in the WGS84 coordinate system for web display purposes. Downloadable data are provided in native coordinate system or projection.

    View full record

  20. Title: Bathymetry Hillshade: Offshore of Half Moon Bay, California, 2007

    Contributors:

    Summary: This layer is a georeferenced raster image containing shaded relief (hillshade) data for the offshore area of Half Moon Bay, California. The bathymetry and shaded-relief maps were generated from bathymetry data collected by Fugro Pelagos, and by California State University, Monterey Bay (CSUMB). The bathymetry and shaded-relief maps of Offshore Half Moon Bay, California, were generated from bathymetry data collected by Fugro Pelagos, and by California State University, Monterey Bay (CSUMB). Mapping was completed in 2006 and 2007, using a combination of 400-kHz Reson 7125 and 244-kHz Reson 8101 multibeam echosounders. These mapping missions combined to collect bathymetry (sheets 1, 2) from about the 10-m isobath to beyond the 3-nautical-mile limit of California's State Waters.The map that show these data are published in Open-File Report 2014–1214, "California State Waters Map Series--Offshore of Half Moon Bay, California." This layer is part of USGS Data Series 781. In 2007, the California Ocean Protection Council initiated the California Seafloor Mapping Program (CSMP) to create a comprehensive seafloor map of high-resolution bathymetry, marine benthic habitats and geology within the 3-nautical-mile limit of California's State Waters. CSMP has divided coastal California into 110 map blocks, each to be published individually as United States Geological Survey Open-File Reports (OFRs) or Scientific Investigations Maps (SIMs) at a scale of 1:24,000. Maps display seafloor morphology and character, identify potential marine benthic habitats and illustrate both the seafloor geology and shallow (to about 100 m) subsurface geology. Data layers for bathymetry, bathymetric contours, acoustic backscatter, seafloor character, potential benthic habitat and offshore geology were created for each map block, as well as regional-scale data layers for sediment thickness, depth to transition, transgressive contours, isopachs, predicted distributions of benthic macro-invertebrates and visual observations of benthic habitat from video cruises over the entire state. These data are intended for science researchers, students, policy makers, and the general public. This information is not intended for navigational purposes.The data can be used with geographic information systems (GIS) software to display geologic and oceanographic information. U.S. Geological Survey. (2013). Bathymetry Hillshade: Offshore of Half Moon Bay, California, 2007. California State Waters Map Series Data Catalog: U.S. Geological Survey Data Series 781. Available at: http://purl.stanford.edu/pv849hj5438. This layer is presented in the WGS84 coordinate system for web display purposes. Downloadable data are provided in native coordinate system or projection.

    View full record

Need help?

Ask GIS