Search for geospatial/GIS data

Find GIS data held at MIT and other institutions

1,053 results returned

  1. Title: Folds: Offshore of Tomales Point, California, 2010

    Contributors:

    Summary: This line shapefile depicts geologic folds within the offshore area of Tomales Point, California. The Point Reyes Peninsula is bounded to the south and west in the offshore by the north- and east-dipping Point Reyes Thrust Fault (McCulloch, 1987; Heck and others, 1990), which lies about 20 km west of Tomales Point. Granitic basement rocks are offset about 1.4 km on this thrust fault offshore of Point Reyes (McCulloch, 1987), and this uplift combined with west-side-up offset on the San Andreas Fault (Grove and Niemi, 2005) resulted in uplift of the Point Reyes Peninsula, including Tomales Point and the adjacent continental shelf. Grove and others (2010) reported uplift rates of as much as 1 mm/yr for the south flank of the Point Reyes Peninsula based on marine terraces, but reported no datable terrace surfaces that could constrain uplift for the flight of 4-5 terraces exposed farther north along Tomales Point. Folds were primarily mapped by interpretation of seismic reflection profile data (see field activity S-15-10-NC). The seismic reflection profiles were collected between 2007 and 2010. A map that shows these data is published in Open-File Report 2015-1088, "California State Waters Map Series--Offshore of Tomales Point, California." This layer is part of USGS Data Series 781. In 2007, the California Ocean Protection Council initiated the California Seafloor Mapping Program (CSMP) to create a comprehensive seafloor map of high-resolution bathymetry, marine benthic habitats and geology within the 3-nautical-mile limit of California's State Waters. CSMP has divided coastal California into 110 map blocks, each to be published individually as United States Geological Survey Open-File Reports (OFRs) or Scientific Investigations Maps (SIMs) at a scale of 1:24,000. Maps display seafloor morphology and character, identify potential marine benthic habitats and illustrate both the seafloor geology and shallow (to about 100 m) subsurface geology. Data layers for bathymetry, bathymetric contours, acoustic backscatter, seafloor character, potential benthic habitat and offshore geology were created for each map block, as well as regional-scale data layers for sediment thickness, depth to transition, transgressive contours, isopachs, predicted distributions of benthic macro-invertebrates and visual observations of benthic habitat from video cruises over the entire state. This coverage can be used to to aid in assessments and mitigation of geologic hazards in the coastal region and to provide sufficient geologic information for land-use and land-management decisions both onshore and offshore. These data are intended for science researchers, students, policy makers, and the general public. This information is not intended for navigational purposes.The data can be used with geographic information systems (GIS) software to display geologic and oceanographic information. Hartwell, S.R., Johnson, S.Y., and Manson, M.W. (2014). Folds: Offshore of Tomales Point, California, 2010. California State Waters Map Series Data Catalog: U.S. Geological Survey Data Series 781. Available at: http://purl.stanford.edu/jf036dx3445. Map political location: San Mateo County, California Compilation scale: 1:24,000 Base maps used are hillshades generated from IfSAR, LiDAR, and multibeam mapping both onshore and offshore (see Bathymetry Hillshade--Offshore of Tomales Point, California, DS 781, for more information). . References Cited Grove, K., and Niemi, T.M., 2005, Late Quaternary deformation and slip rates in the northern San Andreas fault zone at Olema Valley, Marin County, California: Tectonophysics, v. 401, p. 231-250. Grove, K, Sklar, L.S., Scherer, A.M., Lee, G., and Davis, J., 2010, Accelerating and spatially-varying crustal uplift and its geomorphic expression, San Andreas fault zone north of San Francisco, California: Tectonophysics, v. 495, p. 256-268. Heck, R.G., Edwards, E.B., Kronen, J.D., Jr., and Willingham, C.R., 1990, Petroleum potential of the offshore outer Santa Cruz and Bodega basins, California, in Garrison, R.E., Greene, H.G., Hicks, K.R., Weber, G.E., and Wright, T.L., eds. Geology and tectonics of the central California coastal region, San Francisco to Monterey: Pacific Section, American Association of Petroleum Geologists Bulletin GB67, p. 143-164. McCulloch, D.S., 1987, Regional geology and hydrocarbon potential of offshore central California, in Scholl, D.W., Grantz, A., and Vedder, J.G., eds., Geology and Resource Potential of the Continental Margin of Western North America and Adjacent Oceans Beaufort Sea to Baja California: Houston, Texas, Circum-Pacific Council for Energy and Mineral Resources, Earth Science Series, v. 6., p. 353-401. This layer is presented in the WGS84 coordinate system for web display purposes. Downloadable data are provided in native coordinate system or projection.

    View full record

  2. Title: Geology: Offshore of Tomales Point, California, 2010

    Contributors:

    Summary: This polygon shapefile depicts geologic features within the offshore area of Tomales Point, California. The morphology and the geology of the offshore part of the Offshore of Tomales Point map area result from the interplay between tectonics, sea-level rise, local sedimentary processes, and oceanography. The map area is cut by the northwest-trending San Andreas Fault, the right-lateral transform boundary between the North American and Pacific tectonic plates. The San Andreas strikes through Tomales Bay, the northern part of a linear valley that extends from Bolinas through Olema Valley to Bodega Bay, separating mainland California from the Point Reyes Peninsula. Onshore investigations indicate that this section of the San Andreas Fault has an estimated slip rate of about 17 to 25 mm/yr (Bryant and Lundberg, 2002; Grove and Niemi, 2005). The devastating Great 1906 California earthquake (M 7.8) is thought to have nucleated on the San Andreas Fault about 50 kilometers south of this map area offshore of San Francisco (e.g., Bolt, 1968; Lomax, 2005), with the rupture extending northward through the Offshore of Tomales Point map area to the south flank of Cape Mendocino (Lawson, 1908; Brown and Wolfe, 1972). The Point Reyes Peninsula is bounded to the south and west in the offshore by the north- and east-dipping Point Reyes Thrust Fault (McCulloch, 1987; Heck and others, 1990), which lies about 20 km west of Tomales Point. Granitic basement rocks are offset about 1.4 km on this thrust fault offshore of Point Reyes (McCulloch, 1987), and this uplift combined with west-side-up offset on the San Andreas Fault (Grove and Niemi, 2005) resulted in uplift of the Point Reyes Peninsula, including Tomales Point and the adjacent continental shelf. Grove and others (2010) reported uplift rates of as much as 1 mm/yr for the south flank of the Point Reyes Peninsula based on marine terraces, but reported no datable terrace surfaces that could constrain uplift for the flight of 4-5 terraces exposed farther north along Tomales Point. Because of this Quaternary uplift and relative lack of sediment supply from coastal watersheds, there is extensive rugged, rocky seafloor beneath the continental shelf in the Offshore of Tomales Point map area. Granitic rocks (unit Kg) on the seafloor are mapped on the basis of massive character, roughness, extensive fractures, and high backscatter (see Backscattter A to D--Offshore of Tomales Point, California, DS 781, for more information). Neogene sedimentary rocks (units Tl and Tu) commonly form distinctive "ribs," created by differential seafloor erosion of dipping beds of variable resistance. The more massive offshore outcrops of unit Tu in the southern part of the map area are inferred to represent more uniform lithologies. Slopes on the granitic seafloor (generally 1 to 1.3 degrees) are greater than those over sedimentary rock (generally about 0.5 to 0.6 degrees). Sediment-covered areas occur in gently sloping (less than about 0.6 degrees) mid-shelf environments west and north of Tomales Point, and at the mouth of Tomales Bay. Sediment supply is local, limited to erosion from local coastal bluffs and dunes, small coastal watersheds, and sediment flux out of the mouth of Tomales Bay. Shelf morphology and evolution largely reflects eustacy; sea level has risen about 125 to 130 m over about the last 21,000 years (for example, Lambeck and Chappell, 2001; Peltier and Fairbanks, 2005), leading to broadening of the continental shelf, progressive eastward migration of the shoreline and wave-cut platform, and associated transgressive erosion and deposition. Given present exposure to high wave energy, modern nearshore to mid-shelf sediments are mostly sand (unit Qms) and a mix of sand, gravel, and cobbles (units Qmsc and Qmsd). These sediments are distributed between rocky outcrops at water depths of as much as 65 m (see below). The more coarse-grained sands and gravels (units Qmsc and Qmsd) are primarily recognized on the basis of bathymetry and high backscatter. Unit Qmsd forms erosional lags in scoured depressions that are bounded by relatively sharp contacts with bedrock or sharp to diffuse contacts with units Qms and Qmsc. These scoured depressions are typically a few tens of centimeters deep and range in size from a few 10's of sq m to more than one sq km. Similar unit Qmsd scour depressions are common along this stretch of the California coast (see, for example, Cacchione and others, 1984; Hallenbeck and others, 2012) where surficial offshore sandy sediment is relatively thin (thus unable to fill the depressions) due to both lack of sediment supply and to erosion and transport of sediment during large northwest winter swells. Such features have been referred to as rippled-scour depressions (see, for example, Cacchione and others, 1984) or sorted bedforms (see, for example, Goff and others, 2005; Trembanis and Hume, 2011). Although the general areas in which both unit Qmsd scour depressions and surrounding mobile sand sheets occur are not likely to change substantially, the boundaries of the individual Qmsd depressions are likely ephemeral, changing seasonally and during significant storm events. Unit Qmsf consists primarily of mud and muddy sand and is commonly extensively bioturbated. The location of the inboard contact at water depths of about 65 m is based on meager sediment sampling and photographic data and the inference that if must lie offshore of the outer boundary of coarse-grained units Qmsd and Qmsc. This is notably deeper than the inner contact of unit Qmsf offshore of the nearby Russian River (about 50 m; Klise, 1983) which could may reflect both increased wave energy and significantly decreased supply of muddy sediment. There are two areas of high-backscatter, rough seafloor at water depths of 65 to 70 m west of northern Tomales Point. These areas are notable in that each includes several small (less than about 20,000 sq m), randomly distributed to northwest-trending, irregular "mounds," with as much as 1 m of positive relief above the seafloor (unit Qsr). Seismic-reflection data (see field activity S-15-10-NC) reveal this lumpy material rests on several meters of latest Pleistoce to Holocene sediment and is thus not bedrock outcrop. Rather, it seems likely that this material is marine debris, possibly derived from one (or more) of the more than 60 shipwrecks that have occurred offshore of the Point Reyes Peninsula between 1849 and 1940 (National Park Service, 2012). It is also conceivable that this lumpy terrane consists of biological "hardgrounds" Units Qsw, Qstb, Qdtb, and Qsdtb comprise sediments in Tomales Bay. Anima and others (2008) conducted a high-resolution bathymetric survey of Tomales Bay and noted that strong tidal currents at the mouth of the bay had created a large field of sandwaves, dunes, and flats (unit Qsw). Unit Qkdtb is a small subaqueous sandy delta deposited at the mouth of Keys Creek, the largest coastal watershed draining into this northern part of Tomales Bay. Unit Qstb occurs south of units Qsw and Qdtb, and comprises largely flat seafloor underlain by mixed sand and silt. Unit Qdtb consists of depressions within the sedimentary fill of Tomales Bay. These depressions commonly occur directly offshore of coastal promontories, cover as much as 74,000 sq m, and are as deep as 9 m. Map unit polygons were digitized over underlying 2-meter base layers developed from multibeam bathymetry and backscatter data (see Bathymetry--Offshore of Tomales Point, California and Backscattter A to D--Offshore of Tomales Point, California, DS 781). The bathymetry and backscatter data were collected between 2006 and 2010. A map that shows these data is published in Open-File Report 2015-1088, "California State Waters Map Series--Offshore of Tomales Point, California." This layer is part of USGS Data Series 781. In 2007, the California Ocean Protection Council initiated the California Seafloor Mapping Program (CSMP) to create a comprehensive seafloor map of high-resolution bathymetry, marine benthic habitats and geology within the 3-nautical-mile limit of California's State Waters. CSMP has divided coastal California into 110 map blocks, each to be published individually as United States Geological Survey Open-File Reports (OFRs) or Scientific Investigations Maps (SIMs) at a scale of 1:24,000. Maps display seafloor morphology and character, identify potential marine benthic habitats and illustrate both the seafloor geology and shallow (to about 100 m) subsurface geology. Data layers for bathymetry, bathymetric contours, acoustic backscatter, seafloor character, potential benthic habitat and offshore geology were created for each map block, as well as regional-scale data layers for sediment thickness, depth to transition, transgressive contours, isopachs, predicted distributions of benthic macro-invertebrates and visual observations of benthic habitat from video cruises over the entire state. This coverage can be used to to aid in assessments and mitigation of geologic hazards in the coastal region and to provide sufficient geologic information for land-use and land-management decisions both onshore and offshore. These data are intended for science researchers, students, policy makers, and the general public. This information is not intended for navigational purposes.The data can be used with geographic information systems (GIS) software to display geologic and oceanographic information. Hartwell, S.R., Johnson, S.Y., and Manson, M.W. (2014). Geology: Offshore of Tomales Point, California, 2010. California State Waters Map Series Data Catalog: U.S. Geological Survey Data Series 781. Available at: http://purl.stanford.edu/zg934rd8487. Map political location: San Mateo County, California Compilation scale: 1:24,000 Base maps used are hillshades generated from IfSAR, LiDAR, and multibeam mapping both onshore and offshore (see Bathymetry Hillshade--Offshore of Tomales Point, California, DS 781, for more information). References Cited Anima, R. A., Chin, J.L., Finlayson, D.P., McGann, M.L., and Wong, F.L., 2008, Interferometric sidescan bathymetry, sediment and foraminiferal analyses; a new look at Tomales Bay, California: U.S. Geological Survey Open-File Report 2008 - 1237, 33 p. Brown, R.D., Jr., and Wolfe, E.W., 1972, Map showing recently active breaks along the San Andreas Fault between Point Delgada and Bolinas Bay, California: U.S. Geological Survey Miscellaneous Investigations Map I-692, scale 1:24,000. Bryant, W.A., and Lundberg, M.M., compilers, 2002, Fault number 1b, San Andreas fault zone, North Coast section, in Quaternary fault and fold database of the United States: U.S. Geological Survey website, accessed April 4, 2013 at http://earthquakes.usgs.gov/hazards/qfaults. Cacchione, D.A., Drake, D.E., Grant, W.D., and Tate, G.B., 1984, Rippled scour depressions of the inner continental shelf off central California: Journal of Sedimentary Petrology, v. 54, p. 1,280-1,291. Grove, K., and Niemi, T.M., 2005, Late Quaternary deformation and slip rates in the northern San Andreas fault zone at Olema Valley, Marin County, California: Tectonophysics, v. 401, p. 231-250. Grove, K, Sklar, L.S., Scherer, A.M., Lee, G., and Davis, J., 2010, Accelerating and spatially-varying crustal uplift and its geomorphic expression, San Andreas fault zone north of San Francisco, California: Tectonophysics, v. 495, p. 256-268. Klise, D.H., 1984, Modern sedimentation on the California continental margin adjacent to the Russian River: M.S. thesis, San Jose State University, 120 p. Hallenbeck, T.R., Kvitek, R.G., and Lindholm, J., 2012, Rippled scour depressions add ecologically significant heterogeneity to soft-bottom habitats on the continental shelf: Marine Ecology Progress Series, v. 468, p. 119-133. Lambeck, K., and Chappell, J., 2001, Sea level change through the last glacial cycle: Science, v. 292, p. 679-686, doi: 10.1126/science.1059549. Lawson, A.C., ed., 1908, The California earthquake of April 18, 1906, Report of the State Earthquake Investigation Commission: Carnegie Institution of Washington Publication 87, v. 1, 1451 p. and atlas. Lomax, A., 2005, A reanalysis of the hypocentral location and related observations for the Great 1906 California earthquake: Bulletin of the Seismological Society of America, v. 95, p. 861-877. McCulloch, D.S., 1987, Regional geology and hydrocarbon potential of offshore central California, in Scholl, D.W., Grantz, A., and Vedder, J.G., eds., Geology and Resource Potential of the Continental Margin of Western North America and Adjacent Oceans -- Beaufort Sea to Baja California: Houston, Texas, Circum-Pacific Council for Energy and Mineral Resources, Earth Science Series, v. 6., p. 353-401. National Park Service, 2012, Shipwrecks at Point Reyes, accessed May 1, 2013 at: http://www.nps.gov/pore/historyculture/upload/map_shipwrecks.pdf This layer is presented in the WGS84 coordinate system for web display purposes. Downloadable data are provided in native coordinate system or projection.

    View full record

  3. Title: Geology: Drakes Bay and Vicinity, California, 2009

    Contributors:

    Summary: This polygon shapefile represents geologic features of Drakes Bay and the surrounding vicinity of California. Marine geology and geomorphology were mapped from approximate Mean High Water (MHW) to the 3-nautical-mile limit of California's State Waters. MHW is defined at an elevation of 1.46 m above the North American Vertical Datum of 1988 (NAVD 88). Offshore geologic units were delineated on the basis of integrated analyses of adjacent onshore geology with multibeam bathymetry and backscatter imagery, seafloor-sediment and rock samples (Reid and others, 2006), digital camera and video imagery, and high-resolution seismic-reflection profiles. The onshore bedrock mapping was compiled from Galloway (1977), Clark and Brabb (1997), and Wagner and Gutierrez (2010). Quaternary mapping was compiled from Witter and others (2006) and Wagner and Gutierrez (2010), with unit contacts modified based on analysis of 2012 LiDAR imagery; and additional Quaternary mapping by M.W. Manson. San Andreas Fault traces are compiled from California Geological Survey (1974) and Wagner and Gutierrez (2010). The offshore part of the map area includes the large embayment known as Drakes Bay and extends from the shoreline to water depths of about 40 to 60 m. The continental shelf is quite wide in this area, with the shelfbreak located west of the Farallon High, about 35 km offshore. This map area is largely characterized by a relatively flat (<0.8°) bedrock platform that is locally overlain by thin sediment cover. Sea level has risen about 125 to 130 m over about the last 21,000 years (for example, Lambeck and Chappell, 2001; Peltier and Fairbanks, 2006), leading to broadening of the continental shelf, progressive eastward migration of the shoreline and wave-cut platform, and associated transgressive erosion and deposition (for example, Catuneanu, 2006). Land-derived sediment was carried into this dynamic setting, and then subjected to full Pacific Ocean wave energy and strong currents before deposition or offshore transport. Tectonic influences impacting shelf morphology and geology are related to local faulting, folding, uplift, and subsidence. The Point Reyes Fault Zone runs through the map area and is an offshore curvilinear reverse fault zone (Hoskins and Griffiths, 1971; McCulloch, 1987; Heck and others, 1990; Stozek, 2012) that likely connects with the western San Gregorio fault further to the south (Ryan and others, 2008), making it part of the San Andreas Fault System. The Point Reyes Fault Zone is characterized by a 5 to 11 km-wide zone that is associated with two main fault structures, the Point Reyes Fault and the Western Point Reyes Fault. Late Pleistocene uplift of marine terraces on the Point Reyes Peninsula suggests active deformation west of the San Andreas Fault (Grove and others, 2010). Offshore Double Point, the Point Reyes Fault is associated with warping and folding of Neogene strata visible on high-resolution seismic data. In this map area the cumulative (post-Miocene) slip-rate on the Point Reyes Fault Zone is poorly constrained, but is estimated to be 0.3 mm/yr based on vertical offset of granitic basement rocks (McCulloch, 1987; Wills and others, 2008). Salinian granitic basement rocks (unit Kgg) are exposed on the Point Reyes headland and offshore in the northwest corner of the map area. The granitic rocks are mapped on the basis of massive, bulbous texture and extensive fracturing in multibeam imagery, and high backscatter. Much of the inner shelf is underlain by Neogene marine sedimentary rocks that form the core of the Point Reyes syncline (Weaver, 1949), and include the mid- to late Miocene Monterey Formation (unit Tm), late Miocene Santa Margarita Formation (unit Tsm), late Miocene Santa Cruz Mudstone (unit Tsc), and late Miocene to early Pliocene Purisima Formation (unit Tp; Clark and Brabb, 1997; Powell and others, 2007). At Millers Point, the Monterey Formation is exposed onshore and on the seafloor in the nearshore and appears highly fractured with bedding planes difficult to identify. Seafloor exposures of the younger Tsc and Tp units are characterized by distinct rhythmic bedding and are often gently folded and fractured. Unit Tu refers to seafloor outcrops that may include unit Tm, unit Tsm, or unit Tsc. The Santa Cruz Mudstone and underlying Santa Margarita Sandstone at Double Point are more than 450 m thick in an oil test well (Clark and Brabb, 1997), and these units form coastal bluffs and tidal zone exposures that extend onto the adjacent bedrock shelf. The Santa Cruz Mudstone thins markedly to the northwest and disappears from the section about 10 km to the northwest where Purisima Formation unconformably overlies Santa Margarita Sandstone. We infer the offshore contact between the Santa Cruz Mudstone and Purisima Formation based on an angular unconformity visible in seismic data just southeast of the map area. This angular unconformity becomes conformable to the northwest in the Drakes Bay and Vicinity map area. We suggest this contact bends northward in the subsurface and comes onshore near U-Ranch (Galloway, 1977; Clark and Brabb, 1997). Given the lack of lithological evidence for this contact offshore Double Point, this interpretation is speculative, and an alternative interpretation is that the noted unconformity occurs within the Santa Cruz Mudstone. For this reason, we have queried unit Tp here to indicate this uncertainty. Modern nearshore sediments are mostly sand (unit Qms) and a mix of sand, gravel, and cobbles (units Qmsc and Qmsd). The more coarse-grained sands and gravels (units Qmsc and Qmsd) are primarily recognized on the basis of bathymetry and high backscatter (see Bathymetry--Drakes Bay, California and Backscattter A to C--Drakes Bay, California, DS 781, for more information). Both Qmsc and Qmsd typically have abrupt landward contacts with bedrock and form irregular to lenticular exposures that are commonly elongate in the shore-normal direction. Contacts between units Qmsc and Qms are typically gradational. Unit Qmsd forms erosional lags in scoured depressions that are bounded by relatively sharp and less commonly diffuse contacts with unit Qms horizontal sand sheets. These depressions are typically a few tens of centimeters deep and range in size from a few 10's of meters to more than 1 km2. There are two areas of high-backscatter, and rough seafloor that are notable in that each includes several small (less than about 20,000 m2), irregular "lumps", with as much as 1 m of positive relief above the seafloor (unit Qsr). Southeast of the Point Reyes headland, unit Qsr occurs in water depths between 50 and 60 meters, with individual lumps randomly distributed to west-trending. Southwest of Double Point, unit Qsr occurs in water depths between 30 and 40 meters, with individual lumps having a more northwest trend. Seismic-reflection data (see field activity S-8-09-NC) reveal this lumpy material rests on several meters of latest Pleistocene to Holocene sediment and is thus not bedrock outcrop. Rather, it seems likely that this lumpy material is marine debris, possibly derived from one (or more) of the more than 60 shipwrecks offshore of the Point Reyes Peninsula between 1849 and 1940 (National Park Service, 2012). It is also conceivable that this lumpy terrane consists of biological "hardgrounds". Video transect data crossing unit Qsr near the Point Reyes headland was of insufficient quality to distinguish between these above alternatives. A transition to more fine-grained marine sediments (unit Qmsf) occurs around 50-60 m depth south of the Point Reyes headland and west of Double Point, however, directly south and east of Drakes Estero estuary, backscatter and seafloor sediment samples (Chin and others, 1997) suggest fine-grained sediments extend into water depths as shallow as 30 m. Unit Qmsf is commonly extensively bioturbated and consists primarily of mud and muddy sand. These fine-grained sediments are inferred to have been derived from the Drakes and Limantour Esteros or from the San Francisco Bay to the south, via predominantly northwest flow at the seafloor (Noble and Gelfenbaum, 1990. This layer is part of USGS Data Series 781. In 2007, the California Ocean Protection Council initiated the California Seafloor Mapping Program (CSMP) to create a comprehensive seafloor map of high-resolution bathymetry, marine benthic habitats and geology within the 3-nautical-mile limit of California's State Waters. CSMP has divided coastal California into 110 map blocks, each to be published individually as United States Geological Survey Open-File Reports (OFRs) or Scientific Investigations Maps (SIMs) at a scale of 1:24,000. Maps display seafloor morphology and character, identify potential marine benthic habitats and illustrate both the seafloor geology and shallow (to about 100 m) subsurface geology. Data layers for bathymetry, bathymetric contours, acoustic backscatter, seafloor character, potential benthic habitat and offshore geology were created for each map block, as well as regional-scale data layers for sediment thickness, depth to transition, transgressive contours, isopachs, predicted distributions of benthic macro-invertebrates and visual observations of benthic habitat from video cruises over the entire state. These data are intended for science researchers, students, policy makers, and the general public. This information is not intended for navigational purposes.The data can be used with geographic information systems (GIS) software to display geologic and oceanographic information. Additionally, this coverage can provide a geologic map for the public and geoscience community to aid in assessments and mitigation of geologic hazards in the coastal region and sufficient geologic information for land-use and land-management decisions both onshore and offshore. This information is not intended for navigational purposes. Watt, J.T., Manson, M.W., and Greene, H.G. (2014). Geology: Drakes Bay and Vicinity, California, 2009. California State Waters Map Series Data Catalog: U.S. Geological Survey Data Series 781. Available at: http://purl.stanford.edu/pq964cq8146. ). References Cited Catuneanu, O., 2006, Principles of Sequence Stratigraphy: Amsterdam, Elsevier, 375 p. Chin, J.L., Karl, H.A., and Maher, N.M., 1997, Shallow subsurface geology of the continental shelf, Gulf of the Farallones, California, and its relationship to surficial seafloor characteristics: Marine Geology, v. 137, p. 251-269. Clark, J.C., and Brabb, E.E., 1997, Geology of the Point Reyes National Seashore and vicinity: U.S. Geological Survey Open-File Report 97-456, scale 1:48,000. Grove, K., Sklar, L.S., Scherer, A.M., Lee, G., and Davis, J., 2010, Accelerating and spatially-varying crustal uplift and its geomorphic expression, San Andreas Fault zone north of San Francisco, California: Tectonophysics, v. 495, p. 256-268. Hoskins E.G., Griffiths, J.R., 1971, Hydrocarbon potential of northern and central California offshore: American Association of Petroleum Geologists Memoir 15, p. 212-228. Lambeck, K., and Chappell, J., 2001, Sea level change through the last glacial cycle: Science, v. 292, p. 679-686, doi: 10.1126/science.1059549. McCulloch, D.S., 1987, Regional geology and hydrocarbon potential of offshore Central California, in Scholl, D.W., Grantz, A., and Vedder, J.G., eds., Geology and resource potential of the continental margin of Western North America and adjacent ocean basins-Beaufort Sea to Baja California: Circum-Pacific Council for Energy and Mineral Resources Earth Science Series, v. 6, p. 353-401. National Park Service, 2012, Shipwrecks at Point Reyes, available at: http://www.nps.gov/pore/historyculture/upload/map_shipwrecks.pdf Noble, M.A. and Gelfenbaum, G., 1990, A pilot study of currents and suspended sediment in the Gulf of the Farallones: U.S. Geological Survey Open-File Report 90-476, 30 p. Peltier, W.R., and Fairbanks, R.G., 2006, Global glacial ice volume and Last Glacial Maximum duration from an extended Barbados sea level record: Quaternary Science Reviews, v. 25, p. 3,322-3,337. Reid, J.A., Reid, J.M., Jenkins, C.J., Zimmerman, M., Williams, S.J., and Field, M.E., 2006, usSEABED-Pacific Coast (California, Oregon, Washington) offshore surficial-sediment data release: U.S. Geological Survey Data Series 182, available at http://pubs.usgs.gov/ds/2006/182/. Ryan, H.F., Parsons, T., and Sliter, R.W., 2008, Vertical tectonic deformation associated with the San Andreas Fault offshore of San Francisco, California: Tectonophysics, v. 475, p. 209-223. Stozek, B.A., 2012, Geophysical evidence for Quaternary deformation within the offshore San Andreas fault system, northern California: Masters Thesis, San Francisco State University, 141 p. Trembanis, A.C., and Hume, T.M., 2011, Sorted bedforms on the inner shelf off northeastern New Zealand-Spatiotemporal relationships and potential paleo-environmental implications: Geo-Marine Letters, v. 31, p. 203-214. Wagner, D.L., and Gutierrez, C.I., 2010, Preliminary Geologic Map of the Napa 30â x 60â Quadrangle, California: California Geological Survey, scale 1:100,000. Weaver, C.E., 1949, Geology of the Coast Ranges immediately north of San Francisco Bay region, California: Geological Society of America Memoir 35. Weber, K.M., List, J.H., and Morgan, K.L., 2005, An operational Mean High Water datum for determination of shoreline position from topographic lidar data: U.S. Geological Survey Open-File Report 2005-1027, accessed April 5, 2011, at http://pubs.usgs.gov/of/2005/1027/. Wills, C.J., Weldon, R.J., II, and Bryant, W.A., 2008, Appendix A-California fault parameters for the National Seismic Hazard Maps and Working Group on California Earthquake Probabilities 2007: U.S. Geological Survey Open-File Report 2007-1437A, 48 p., available at http://pubs.usgs.gov/of/2007/1437/a/. Witter, R.C., Knudsen, K.L., Sowers, J.M., Wentworth, C.M., Koehler, R.D., Randolph, C.E., Brooks, S.K., and Gans, K.D., 2006, Maps of Quaternary Deposits and Liquefaction Susceptibility in the Central San Francisco Bay Region, California, U.S. Geological Survey Open-File Report 06-1037, scale 1:24,000.</SPAN></P></DIV></DIV></DIV> This layer is presented in the WGS84 coordinate system for web display purposes. Downloadable data are provided in native coordinate system or projection.

    View full record

  4. Title: Faults: Offshore of Fort Ross, California, 2009

    Contributors:

    Summary: This line shapefile contains fault lines for the offshore area of Fort Ross, California. The map was generated from data collected by California State University, Monterey Bay (CSUMB), and by Fugro Pelagos. The map area is cut by the northwest-trending San Andreas Fault, the right-lateral transform boundary between the North American and Pacific tectonic plates. The San Andreas extends across the inner shelf in the southern part of the map, then crosses the shoreline at Fort Ross and continues onland for about 75 km to the east flank of Point Arena (fig. 8-1). Seismic-reflection data are used to map the offshore fault trace, and reveal a relatively simple, 200- to 500-m wide zone typically characterized by one or two primary strands. About 1500 m west of the San Andreas Fault, the mid shelf (between water depths of 40 m and 70 m) in the southernmost part of the map area includes an about 5-km-wide field of elongate, shore-normal sediment lobes (unit Qmsl). Individual lobes within the field are as much as 650-m long and 200-m wide, have as much as 1.5 m (check with Steve) of relief above the surrounding smooth seafloor, and are commonly connected with upslope chutes. Given their morphology and proxmity to the San Andreas fault, we infer that these lobes result from slope failures associated with strong ground motions triggered by large San Andreas earthquakes. Movement on the San Andreas has juxtaposed different coastal bedrock blocks (Blake and others, 2002). Rocks east of the fault that occur along the coast and in the nearshore belong to the late Tertiary, Cretaceous, and Jurassic Franciscan Complex, either sandstone of the Coastal Belt or Central Belt (unit TKfs) or melange of the central terrane (unit fsr). Bedrock west of the fault are considered part of the Gualala Block (Elder, 1998) and include the Eocene and Paleocene German Rancho Formation (unit Tgr) and the Miocene sandstone and mudstone of the Fort Ross area (unit Tsm). This section of the San Andreas Fault onland has an estimated slip rate of about 17 to 25 mm/yr (Bryant and Lundberg, 2002). The devastating Great 1906 California earthquake (M 7.8) is thought to have nucleated on the San Andreas Fault about 100 kilometers south of this map area offshore of San Francisco (e.g., Bolt, 1968; Lomax, 2005), with the rupture extending northward through the Offshore of Fort Ross map area to the south flank of Cape Mendocino. Emergent marine terraces along the coast in the Offshore of Fort Ross map area record recent contractional deformation associated with the San Andreas Fault system. Prentice and Kelson (2006) report uplift rates of 0.3 to 0.6 mm/yr for a late Pleistocene terrace exposed at Fort Ross, and this recent uplift must also have affect the nearshore and inner shelf. Previously, McCulloch (1987) mapped a nearshore (within 3 to 5 km of the coast) fault zone from Point Arena to Fort Ross (Fig. 8-1) using primarily deeper industry seismic-reflection data. Subsequently, Dickinson and others (2005) named this structure the "Gualala Fault." Our mapping, also based on seismic-reflection data, reveals this structure as a steep, northeast trending fault and similarly shows the fault ending to the south in the northern part of the Offshore of Fort Ross map area. We have designated the zone of faulting and folding above this structure the "Gualala Fault deformation zone." Faults were primarily mapped by interpretation of seismic reflection profile data (see field activity S-8-09-NC). The seismic reflection profiles were collected between 2007 and 2010. This layer is part of USGS Data Series 781. In 2007, the California Ocean Protection Council initiated the California Seafloor Mapping Program (CSMP) to create a comprehensive seafloor map of high-resolution bathymetry, marine benthic habitats and geology within the 3-nautical-mile limit of California's State Waters. CSMP has divided coastal California into 110 map blocks, each to be published individually as United States Geological Survey Open-File Reports (OFRs) or Scientific Investigations Maps (SIMs) at a scale of 1:24,000. Maps display seafloor morphology and character, identify potential marine benthic habitats and illustrate both the seafloor geology and shallow (to about 100 m) subsurface geology. Data layers for bathymetry, bathymetric contours, acoustic backscatter, seafloor character, potential benthic habitat and offshore geology were created for each map block, as well as regional-scale data layers for sediment thickness, depth to transition, transgressive contours, isopachs, predicted distributions of benthic macro-invertebrates and visual observations of benthic habitat from video cruises over the entire state. These data are intended for science researchers, students, policy makers, and the general public. This information is not intended for navigational purposes.The data can be used with geographic information systems (GIS) software to display geologic and oceanographic information. Additionally, this coverage can provide a geologic map for the public and geoscience community to aid in assessments and mitigation of geologic hazards in the coastal region and sufficient geologic information for land-use and land-management decisions both onshore and offshore. Johnson, S.Y., Hartwell, S.R., and Manson, M.W. (2014). Faults: Offshore of Fort Ross, California, 2009. California State Waters Map Series Data Catalog: U.S. Geological Survey Data Series 781. Available at: http://purl.stanford.edu/nv824nq7744. Map political location: San Mateo County, California Compilation scale: 1:24,000 Base maps used are hillshades generated from IfSAR, LiDAR, and multibeam mapping both onshore and offshore (see Bathymetry--Offshore of Fort Ross Map Area, California). References Cited Blake, M.C., Jr., Graymer, R.W., and Stamski, R.E., 2002, Geologic map and map database of western Sonoma, northernmost Marin, and southernmost Mendocino counties, California: U.S. Geological Survey Miscellaneous Field Studies Map 2402, scale 1:100,000. Bolt, B.A., 1968, The focus of the 1906 California earthquake: Bulletin of the Seismological Society of America, v. 58, p. 457-471. Bryant, W.A., and Lundberg, M.M., compilers, 2002, Fault number 1b, San Andreas fault zone, North Coast section, in Quaternary fault and fold database of the United States: U.S. Geological Survey website, accessed April 4, 2013, at http://earthquakes.usgs.gov/hazards/qfaults. Dickinson, W.R., Ducea, M., Rosenberg, L.I., Greene, H.G., Graham, S.A., Clark, J.C., Weber, G.E., Kidder, S., Ernst, W.G., and Brabb, E.E., 2005, Net dextral slip, Neogene San Gregorio-Hosgri Fault Zone, coastal California: Geologic evidence and tectonic implications: Geological Society of America Special Paper 391, 43 p. Elder, W.P., ed., 1998, Geology and tectonics of the Gualala Block, northern California: Pacific Section, Society of Economic Paleontologists and Mineralogists, Book 84, 222 p. Lomax, A., 2005, A reanalysis of the hypocentral location and related observations for the Great 1906 California earthquake: Bulletin of the Seismological Society of America, v. 95, p. 861-877. McCulloch, D.S., 1987, Regional geology and hydrocarbon potential of offshore central California, in Scholl, D.W., Grantz, A., and Vedder, J.G., eds., Geology and Resource Potential of the Continental Margin of Western North America and Adjacent Oceans -- Beaufort Sea to Baja California: Houston, Texas, Circum-Pacific Council for Energy and Mineral Resources, Earth Science Series, v. 6., p. 353-401. Prentice, C.S., and Kelson, K.I., 2006, The San Andreas fault in Sonoma and Mendocino counties, in Prentice, C.S., Scotchmoor, J.G., Moores, E.M., and Kiland, J.P., eds., 1906 San Francisco Earthquake Centennial Field Guides: Field trips associated with the 100th Anniversary Conference, 18-23 April 2006, San Francisco, California: Geological Society of America Field Guide 7, p. 127-156. This layer is presented in the WGS84 coordinate system for web display purposes. Downloadable data are provided in native coordinate system or projection.

    View full record

  5. Title: Folds: Offshore of Pacifica, California, 2010

    Contributors:

    Summary: This line shapefile contains geologic folds in the offshore area of Pacifica, California. The Offshore of Pacifica map area straddles the right-lateral transform boundary between the North American and Pacific plates and is cut by several active faults that cumulatively form a distributed shear zone, including the San Andreas Fault, the eastern strand of the San Gregorio Fault, the Golden Gate Fault, and the Potato Patch Fault (sheets 8, 9; Bruns and others, 2002; Ryan and others, 2008). These faults are covered by Holocene sediments (mostly units Qms, Qmsb, Qmst) with no seafloor expression, and are mapped using seismic-reflection data (sheet 8). The San Andreas Fault is the primary plate-boundary structure and extends northwest across the map area; it intersects the shoreline 10 km north of the map area at Pacifica Lagoon, and 3 km south of the map area at Mussel Rock. This section of the San Andreas Fault has an estimated slip rate of 17 to 24 mm/yr (U.S. Geological Survey, 2010), and the devastating Great 1906 California earthquake (M 7.8) is thought to have nucleated on the San Andreas a few kilometers offshore of San Francisco within the map area (sheet 9; Bolt, 1968; Lomax, 2005). The San Andreas Fault forms the boundary between two distinct basement terranes, Upper Jurassic to Lower Cretaceous rocks of the Franciscan Complex to the east, and Late Cretaceous granitic and older metamorphic rocks of the Salinian block to the west. Franciscan Complex rocks (unit KJf, undivided) form seafloor outcrops at and north of Point Lobos adjacent to onland exposures. The Franciscan is divided into 13 different units for the onshore portion of this geologic map based on different lithologies and ages, but the unit cannot be similarly divided in the offshore because of a lack of direct observation and (or) sampling. Folds were primarily mapped by interpretation of seismic reflection profile data (see S-15-10-NC and F-2-07-NC). The seismic reflection profiles were collected between 2007 and 2010. A map which shows these data is published in Scientific Investigations Map 3302, "California State Waters Map Series--Offshore of Coal Oil Point, California." This layer is part of USGS Data Series 781. In 2007, the California Ocean Protection Council initiated the California Seafloor Mapping Program (CSMP) to create a comprehensive seafloor map of high-resolution bathymetry, marine benthic habitats and geology within the 3-nautical-mile limit of California's State Waters. CSMP has divided coastal California into 110 map blocks, each to be published individually as United States Geological Survey Open-File Reports (OFRs) or Scientific Investigations Maps (SIMs) at a scale of 1:24,000. Maps display seafloor morphology and character, identify potential marine benthic habitats and illustrate both the seafloor geology and shallow (to about 100 m) subsurface geology. Data layers for bathymetry, bathymetric contours, acoustic backscatter, seafloor character, potential benthic habitat and offshore geology were created for each map block, as well as regional-scale data layers for sediment thickness, depth to transition, transgressive contours, isopachs, predicted distributions of benthic macro-invertebrates and visual observations of benthic habitat from video cruises over the entire state. These data are intended for science researchers, students, policy makers, and the general public. This information is not intended for navigational purposes.The data can be used with geographic information systems (GIS) software to display geologic and oceanographic information. Additionally, this coverage can provide a geologic map for the public and geoscience community to aid in assessments and mitigation of geologic hazards in the coastal region and sufficient geologic information for land-use and land-management decisions both onshore and offshore. Greene, H.G., Hartwell, S.R., Manson, M.W., Johnson, S.Y., Dieter, B.E., Phillips, E.L., and Watt, J.T. (2014). Folds: Offshore of Pacifica, California, 2010. California State Waters Map Series Data Catalog: U.S. Geological Survey Data Series 781. Available at: http://purl.stanford.edu/mh718dy4756. Map political location: San Mateo County, California Compilation scale: 1:24,000 Base maps used are hillshades generated from IfSAR, LiDAR, and multibeam mapping both onshore and offshore (see Bathymetry--Offshore of Pacifica map area, California, DS 781, for more information). References Cited Bolt, B.A., 1968, The focus of the 1906 California earthquake: Bulletin of the Seismological Society of America, v. 58, p. 457-471. Bruns, T.R., Cooper, A.K., Carlson, P.R., and McCulloch, D.S., 2002, Structure of the submerged San Andreas and San Gregorio fault zones in the Gulf of Farallones as inferred from high-resolution seismic-reflection data, in Parsons, T. (ed.), Crustal structure of the coastal and marine San Francisco Bay region, California: U.S. Geological Survey Professional Paper 1658, p. 77-117. Lomax, A., 2005, A reanalysis of the hypocentral location and related observations for the Great 1906 California earthquake: Bulletin of the Seismological Society of America, v. 95, p. 861-877. Ryan, H.F., Parsons, T., and Sliter, R.W., 2008. Vertical tectonic deformation associated with the San Andreas fault zone offshore of San Francisco, California. Tectonophysics, 429 (1-2), p. 209-224. U.S. Geological Survey and California Geological Survey, 2010, Quaternary fault and fold database for the United States, accessed April 5, 2012, from USGS website: http://earthquake.usgs.gov/hazards/qfaults/. This layer is presented in the WGS84 coordinate system for web display purposes. Downloadable data are provided in native coordinate system or projection.

    View full record

  6. Title: Faults: Offshore of Bolinas, California, 2009

    Contributors:

    Summary: This line shapefile contains fault lines for the offshore area of Bolinas, California. The map area straddles the right-lateral transform boundary between the North American and Pacific plates and is cut by several active faults that cumulatively form a distributed shear zone, including the San Andreas Fault, the eastern strand of the San Gregorio Fault, the Golden Gate Fault, and the Potato Patch Fault (Bruns and others, 2002; Ryan and others, 2008). These faults are covered by sediment (mostly unit Qms) with no seafloor expression, and are mapped using seismic-reflection data (see field activities S-8-09-NC and L-1-06-SF). The San Andreas Fault is the primary plate-boundary structure and extends northwest through the southern part of the map area before passing onshore at Bolinas Lagoon. This section of the San Andreas Fault has an estimated slip rate of 17 to 24 mm/yr (U.S. Geological Survey, 2010), and the devastating Great 1906 California earthquake (M 7.8) is thought to have nucleated on the San Andreas a few kilometers south of this map area offshore of San Francisco (e.g., Bolt, 1968; Lomax, 2005). The San Andreas Fault forms the boundary between two distinct basement terranes, Upper Jurassic and Lower Cretaceous melange and graywacke sandstone of the Franciscan Complex to the east, and Late Cretaceous granitic and older metamorphic rocks of the Salinian block to the west. Franciscan Complex rocks (unit KJf, undivided) form seafloor outcrops adjacent to the shoreline southeast of Stinson Beach that are commonly continuous with onshore coastal outcrops. Faults were primarily mapped by interpretation of seismic reflection profile data (see field activities S-8-09-NC and L-1-06-SF). The seismic reflection profiles were collected between 2006 and 2009. In 2007, the California Ocean Protection Council initiated the California Seafloor Mapping Program (CSMP) to create a comprehensive seafloor map of high-resolution bathymetry, marine benthic habitats and geology within the 3-nautical-mile limit of California's State Waters. CSMP has divided coastal California into 110 map blocks, each to be published individually as United States Geological Survey Open-File Reports (OFRs) or Scientific Investigations Maps (SIMs) at a scale of 1:24,000. Maps display seafloor morphology and character, identify potential marine benthic habitats and illustrate both the seafloor geology and shallow (to about 100 m) subsurface geology. Data layers for bathymetry, bathymetric contours, acoustic backscatter, seafloor character, potential benthic habitat and offshore geology were created for each map block, as well as regional-scale data layers for sediment thickness, depth to transition, transgressive contours, isopachs, predicted distributions of benthic macro-invertebrates and visual observations of benthic habitat from video cruises over the entire state. These data are intended for science researchers, students, policy makers, and the general public. This information is not intended for navigational purposes.The data can be used with geographic information systems (GIS) software to display geologic and oceanographic information. Additionally, this coverage can provide a geologic map for the public and geoscience community to aid in assessments and mitigation of geologic hazards in the coastal region and sufficient geologic information for land-use and land-management decisions both onshore and offshore. This information is not intended for navigational purposes. Johnson, S.Y., Greene, H.G., Manson, M.W., Hartwell, S.R., Endris, C.A., and Watt, J.T. (2014). Faults: Offshore of Bolinas, California, 2009. California State Waters Map Series Data Catalog: U.S. Geological Survey Data Series 781. Available at: http://purl.stanford.edu/hv220sb1684. Map political location: Marin County, California Compilation scale: 1:24,000 Base maps used are hillshades generated from IfSAR, LiDAR, and multibeam mapping both onshore and offshore (see Bathymetry Hillshade--Offshore Bolinas, California, DS 781, for more information). References Cited Bolt, B.A., 1968, The focus of the 1906 California earthquake: Bulletin of the Seismological Society of America, v. 58, p. 457-471. Bruns, T.R., Cooper, A.K., Carlson, P.R., and McCulloch, D.S., 2002, Structure of the submerged San Andreas and San Gregorio fault zones in the Gulf of Farallones as inferred from high-resolution seismic-reflection data, in Parsons, T. (ed.), Crustal structure of the coastal and marine San Francisco Bay region, California: U.S. Geological Survey Professional Paper 1658, p. 77-117. Lomax, A., 2005, A reanalysis of the hypocentral location and related observations for the Great 1906 California earthquake: Bulletin of the Seismological Society of America, v. 95, p. 861-877. Ryan, H.F., Parsons, T., and Sliter, R.W., 2008. Vertical tectonic deformation associated with the San Andreas fault zone offshore of San Francisco, California. Tectonphysics, 429 (1-2), p. 209-224. U.S. Geological Survey and California Geological Survey, 2010, Quaternary fault and fold database for the United States, accessed April 5, 2012, from USGS website: http://earthquake.usgs.gov/hazards/qfaults/. This layer is presented in the WGS84 coordinate system for web display purposes. Downloadable data are provided in native coordinate system or projection.

    View full record

  7. Title: Folds: Offshore of Salt Point, California, 2010

    Contributors:

    Summary: This shapefile contains geologic folds within the offshore area of Salt Point, California. The onshore part of the Offshore of Salt Point map area is cut by the northwest-trending San Andreas Fault, the right-lateral transform boundary between the North American and Pacific tectonic plates. The San Andreas extends extends into the offshore about 5 km south of the map area near Fort Ross, and about 50 km north of the map area on the east flank of Point Arena. The coast between Fort Ross and Point Arena, the northwesternmost exposed section west of the San Andreas Fault, is known as the "Gualala Block" (fig. 1) on the basis of its distinctive geology, which has been widely used to develop paleogeographic reconstructions of coastal California that restore as much as 150 to 180 km of right-lateral slip on the combined San Andreas and San Gregorio Fault systems (see, for example, Wentworth, (1968); Wentworth and others (1998); Jachens and others (1998); Dickinson and others (2005); Burnham (2009). The Gualala Block is underlain by a thick (as much as 9 to 11 km, in aggregate), discontinuous Upper Cretaceous to Miocene stratigraphic section (summarized in Wentworth and others, 1998), however only the Eocene and Paleocene German Rancho Formation (unit Tgr) is exposed onshore and is inferred to form seafloor bedrock outcrops in the Offshore of Salt Point map area. The German Rancho Formation consists of sandstone, mudstone, and conglomerate interpreted as deep-water, submarine-fan deposits. The western boundary of the Gualala Block lies offshore. Using seismic-reflection data, McCulloch (1987; his fig. 14) mapped a shore-parallel fault about 3 to 5 km offshore, which Dickinson and others (2005) subsequently named the Gualala Fault. Jachens and others (1998) evaluated aeromagnetic and gravity data across this zone and modeled this structure as a steep fault within the Salinian basement block, characterized by 3 to 5 km of right-lateral offset. In contrast, Dickinson and others (2005) consider the Gualala fault a Late Miocene strand of the San Andreas fault, separating Salinian and Franciscan basement rocks, with minimum right-lateral slip of 70 km. Our analysis of deeper industry seismic-reflection data within California State Waters shows the Gualala fault as a steep, northeast-dipping structure. Shallower seismic-reflection crossing the Gualala fault reveal a thick late(?) Pleistocene section characterized by recent faulting and gentle asymmetric folding. Hence, the Gualala fault appears to be a recently active "blind" structure that has deformed young sediments. Our mapping also documents a more nearshore zone of deformation that we refer to as the "east Gualala deformation zone." This zone extends through the central and southern parts of the Offshore of Salt Point map area and is similarly charcterized by steep faults and gentle folds that deform inferred late Pleistocene strata. This section of the San Andreas Fault onland has an estimated slip rate of about 17 to 25 mm/yr (Bryant and Lundberg, 2002). The devastating Great 1906 California earthquake (M 7.8) is thought to have nucleated on the San Andreas Fault about 100 kilometers south of this map area offshore of San Francisco (e.g., Bolt, 1968; Lomax, 2005), with the rupture extending northward through the onshore part of the Offshore of Salt Point map area to the south flank of Cape Mendocino (Lawson, 1908; Brown and Wolfe, 1972). Emergent marine terraces along the coast in the Offshore of Salt Point map area record recent contractional deformation associated with the San Andreas Fault system. Prentice and Kelson (2006) reported uplift rates of 0.3 to 0.6 mm/yr for a nearby late Pleistocene terrace (exposed at Fort Ross, about 5 km south of the map area) and this recent uplift must also have affected the nearshore and inner shelf, at least as far west as the Gualala fault. Folds were primarily mapped by interpretation of seismic reflection profile data (see field activity S-8-09-NC). The seismic reflection profiles were collected between 2007 and 2010. A map that shows these data is published in Open-File Report 2015–1098, "California State Waters Map Series- Offshore of Salt Point, California." This layer is a part of USGS DS 781. In 2007, the California Ocean Protection Council initiated the California Seafloor Mapping Program (CSMP) to create a comprehensive seafloor map of high-resolution bathymetry, marine benthic habitats and geology within the 3-nautical-mile limit of California's State Waters. CSMP has divided coastal California into 110 map blocks, each to be published individually as United States Geological Survey Open-File Reports (OFRs) or Scientific Investigations Maps (SIMs) at a scale of 1:24,000. Maps display seafloor morphology and character, identify potential marine benthic habitats and illustrate both the seafloor geology and shallow (to about 100 m) subsurface geology. Data layers for bathymetry, bathymetric contours, acoustic backscatter, seafloor character, potential benthic habitat and offshore geology were created for each map block, as well as regional-scale data layers for sediment thickness, depth to transition, transgressive contours, isopachs, predicted distributions of benthic macro-invertebrates and visual observations of benthic habitat from video cruises over the entire state. This coverage can be used to to aid in assessments and mitigation of geologic hazards in the coastal region and to provide sufficient geologic information for land-use and land-management decisions both onshore and offshore. These data are intended for science researchers, students, policy makers, and the general public. This information is not intended for navigational purposes.The data can be used with geographic information systems (GIS) software to display geologic and oceanographic information. Hartwell, S.R., Johnson, S.Y., and Manson, M.W. (2014). Folds: Offshore of Salt Point, California, 2010. California State Waters Map Series Data Catalog: U.S. Geological Survey Data Series 781. Available at: http://purl.stanford.edu/ch246dg0289. Map political location: Sonoma County, California Compilation scale: 1:24,000 Base maps used are hillshades generated from IfSAR, LiDAR, and multibeam mapping both onshore and offshore (see Bathymetry--Offshore of Salt Point Map Area, California). . References Cited Bolt, B.A., 1968, The focus of the 1906 California earthquake: Bulletin of the Seismological Society of America, v. 58, p. 457-471. Brown, R.D., Jr., and Wolfe, E.W., 1972, Map showing recently active breaks along the San Andreas Fault between Point Delgada and Bolinas Bay, California: U.S. Geological Survey Miscellaneous Investigations Map I-692, scale 1:24,000. Bryant, W.A., and Lundberg, M.M., compilers, 2002, Fault number 1b, San Andreas fault zone, North Coast section, in Quaternary fault and fold database of the United States: U.S. Geological Survey website, accessed April 4, 2013 at http://earthquakes.usgs.gov/hazards/qfaults. Burnham, K., 2009, Predictive model of San Andreas Fault system paleogeography, Late Cretaceous to early Miocene, derived from detailed multidisciplinary conglomerate correlations: Tectonophysics 464, p. 195-208. Dickinson, W.R., Ducea, M., Rosenberg, L.I., Greene, H.G., Graham, S.A., Clark, J.C., Weber, G.E., Kidder, S., Ernst, W.G., and Brabb, E.E., 2005, Net dextral slip, Neogene San Gregorio-Hosgri Fault Zone, coastal California: Geologic evidence and tectonic implications: Geological Society of America Special Paper 391, 43 p. Jachens, R.C., Wentworth, C.M., and McLaughlin, R.J., 1998, Pre-San Andreas location of the Gualala Block inferred from magnetic and gravity anomalies, in Elder, W.P., ed., Geology and tectonics of the Gualala block, northern California: Pacific Section, Society of Economic Paleontologists and Mineralogists, Book 84, p. 27-53. Lawson, A.C., ed., 1908, The California earthquake of April 18, 1906, Report of the State Earthquake Investigation Commission: Carnegie Institution of Washington Publication 87, v. 1, 1451 p. and atlas. Lomax, A., 2005, A reanalysis of the hypocentral location and related observations for the Great 1906 California earthquake: Bulletin of the Seismological Society of America, v. 95, p. 861-877. McCulloch, D.S., 1987, Regional geology and hydrocarbon potential of offshore central California, in Scholl, D.W., Grantz, A., and Vedder, J.G., eds., Geology and Resource Potential of the Continental Margin of Western North America and Adjacent Oceans Beaufort Sea to Baja California: Houston, Texas, Circum-Pacific Council for Energy and Mineral Resources, Earth Science Series, v. 6., p. 353-401. Prentice, C.S., and Kelson, K.I., 2006, The San Andreas fault in Sonoma and Mendocino counties, in Prentice, C.S., Scotchmoor, J.G., Moores, E.M., and Kiland, J.P., eds., 1906 San Francisco Earthquake Centennial Field Guides: Field trips associated with the 100th Anniversary Conference, 18-23 April 2006, San Francisco, California: Geological Society of America Field Guide 7, p. 127-156, Wentworth, C.M., 1968, Upper Cretaceous and lower Tertiary strata near Gualala, California, and inferred large right slip on the San Andreas fault, in Dickinson, W.R., and Grantz, A., eds. Proceedings of conference on geologic problems of San Andreas fault system: Stanford University Publications, Geological Sciences, v. 11, p. 130-143. Wentworth, C.M., Jones, D.L., and Brabb, E.E., 1998, Geology and regional correlation of the Cretaceous and Paleogene rocks of the Gualala block, California, in Elder, W.P., ed., Geology and tectonics of the Gualala block, northern California: Pacific Section, Society of Economic Paleontologists and Mineralogists, Book 84, p. 3-26. This layer is presented in the WGS84 coordinate system for web display purposes. Downloadable data are provided in native coordinate system or projection.

    View full record

  8. Title: Faults: Offshore of Point Reyes, California, 2009

    Contributors:

    Summary: This line shapefile represents fault lines in the offshore region of Point Reyes, California, Faults in the Point Reyes map area are identified on seismic-reflection data based on abrupt truncation or warping of reflections and (or) juxtaposition of reflection panels with different seismic parameters such as reflection presence, amplitude, frequency, geometry, continuity, and vertical sequence. The Point Reyes Fault Zone runs through the map area and is an offshore curvilinear reverse fault zone with predominantly north-side-up motion (Hoskins and Griffiths, 1971; McCulloch, 1987; Heck and others, 1990; Stozek, 2012) that likely connects with the western San Gregorio fault further to the south (Ryan and others, 2008), making it part of the San Andreas Fault System. The Point Reyes Fault Zone is characterized by a 5 to 11 km-wide zone of deformation in the shallow subsurface that is associated with two main fault structures, the Point Reyes Fault and the western Point Reyes Fault. Near the Point Reyes headland, vertical displacement of granitic basement across the Point Reyes Fault is at least 1.4 km (McCulloch, 1987). Offshore Double Point, vertical displacement on the Point Reyes Fault is difficult to assess because subsurface age constraints from nearby wells are lacking, and there are few offset horizons across the fault imaged on available seismic data. However, warping and folding of Neogene strata are clearly visible on high-resolution seismic data . The western Point Reyes Fault is defined by a broad anticlinal structure visible in both industry and high-resolution seismic datasets that exhibits that same sense of vergence (north-side-up) as the Point Reyes Fault. Faults were primarily mapped by interpretation of seismic reflection profile data (see field activity S-8-09-NC). The seismic reflection profiles were collected in 2009. The map that show these data are published in Open-File Report 2015-1114, "California State Waters Map Series—Offshore of Point Reyes, California." This layer is part of USGS Data Series 781. In 2007, the California Ocean Protection Council initiated the California Seafloor Mapping Program (CSMP) to create a comprehensive seafloor map of high-resolution bathymetry, marine benthic habitats and geology within the 3-nautical-mile limit of California's State Waters. CSMP has divided coastal California into 110 map blocks, each to be published individually as United States Geological Survey Open-File Reports (OFRs) or Scientific Investigations Maps (SIMs) at a scale of 1:24,000. Maps display seafloor morphology and character, identify potential marine benthic habitats and illustrate both the seafloor geology and shallow (to about 100 m) subsurface geology. Data layers for bathymetry, bathymetric contours, acoustic backscatter, seafloor character, potential benthic habitat and offshore geology were created for each map block, as well as regional-scale data layers for sediment thickness, depth to transition, transgressive contours, isopachs, predicted distributions of benthic macro-invertebrates and visual observations of benthic habitat from video cruises over the entire state. This coverage can be used to to aid in assessments and mitigation of geologic hazards in the coastal region and to provide sufficient geologic information for land-use and land-management decisions both onshore and offshore. These data are intended for science researchers, students, policy makers, and the general public. This information is not intended for navigational purposes.The data can be used with geographic information systems (GIS) software to display geologic and oceanographic information. Watt, J.T., Manson, M.W., and Greene, H.G. (2014). Faults: Offshore of Point Reyes, California, 2009. California State Waters Map Series Data Catalog: U.S. Geological Survey Data Series 781. Available at: http://purl.stanford.edu/pz354gs3764. Map political location: Marin County, California Compilation scale: 1:24,000 Base maps used are hillshades generated from IfSAR, LiDAR, and multibeam mapping both onshore and offshore (see see Bathymetry--Offshore Point Reyes, California, DS 781 for more information). References Cited Heck, R.G., Edwards, E.B., Kronen, J.D., Jr., and Willingham, C.R., 1990, Petroleum potential of the offshore outer Santa Cruz and Bodega basins, California, in Garrison, R.E., Greene, H.G., Hicks, K.R., Weber, G.E., and Wright, T.L., eds. Geology and tectonics of the central California coastal region, San Francisco to Monterey: Pacific Section, American Association of Petroleum Geologists Bulletin GB67, p. 143-164. Hoskins E.G., Griffiths, J.R., 1971, Hydrocarbon potential of northern and central California offshore: American Association of Petroleum Geologists Memoir 15, p. 212-228. McCulloch, D.S., 1987, Regional geology and hydrocarbon potential of offshore central California, in Scholl, D.W., Grantz, A., and Vedder, J.G., eds., Geology and Resource Potential of the Continental Margin of Western North America and Adjacent Oceans Beaufort Sea to Baja California: Houston, Texas, Circum-Pacific Council for Energy and Mineral Resources, Earth Science Series, v. 6., p. 353-401. Ryan, H.F., Parsons, T., and Sliter, R.W., 2008, Vertical tectonic deformation associated with the San Andreas Fault offshore of San Francisco, California: Tectonophysics, v. 475, p. 209-223. Stozek, B.A., 2012, Geophysical evidence for Quaternary deformation within the offshore San Andreas fault system, northern California: Masters Thesis, San Francisco State University, 141 p. This layer is presented in the WGS84 coordinate system for web display purposes. Downloadable data are provided in native coordinate system or projection.

    View full record

  9. Title: Geology: Offshore of Bolinas, California, 2009

    Contributors:

    Summary: This polygon shapefile represents geologic features within the offshore area of Bolinas, California. The continental shelf within California's State waters in the Bolinas area is relatively flat (less than 0.3 degrees) and shallow (less than 30 m) in the entire area, however the seafloor of the "Marin shelf" east of the San Andreas Fault (see below) is smooth and covered with sediment, whereas the seafloor of the "Bolinas shelf" west of this fault has extensive bedrock outcrop from the nearshore to depths of about 25 m and much less sediment cover. The morphology and geology of this shelf result from the interplay between local tectonics, sea-level rise, sedimentary processes, and oceanography. Tectonic influences are related to local faulting, folding, uplift, and subsidence (see below). Sea level has risen about 125 to 130 m over about the last 21,000 years (for example, Lambeck and Chappel, 2001; Gornitz, 2009), leading to progressive eastward migration (a few tens of km) of the shoreline and wave-cut platform, and associated transgressive erosion and deposition (for example, Catuneanu, 2006). The Offshore of Bolinas map area is now subjected to full, and sometimes severe, Pacific Ocean wave energy and strong currents. Given their relatively shallow depths and exposure to high wave energy, modern shelf sediments are mostly sand (unit Qms). More coarse-grained sands and gravels (units Qmsc and Qmss) are primarily recognized on the basis of bathymetry and high backscatter (see Bathymetry--Offshore Bolinas, California and Backscattter A to E--Offshore Bolinas, California, DS 781, for more information). Unit Qmsc occurs in two areas, on the east flank of Bolinas shelf bedrock exposures, and as three mounds south of Bolinas near the outer boundary of Californiaâs State Waters at water depths of about 25 m. The largest of these mounds is about 450 m long and 70 m wide, and has 80 cm of positive relief above the seafloor. Unit Qmss is much more extensive and forms erosional lags in rippled scour depressions (for example, Cacchione and others, 1984) that are typically a few tens of centimeters deep and bounded by mobile sand sheets. The depressions occur in four distinct locations. (1) The first location lies adjacent to bedrock outcrops within 2 km of the shoreline south of Double Point (along the western edge of the map area) at water depths of 10 to 25 m. (2) The second unit Qmss location is about 2 to 6 km south of Bolinas Lagoon at similar water depths, along the eastern flank of the Bolinas shelf. (3) The third, more restricted location, occurs about 3 km southeast of Rocky Point at water depths of about 10 to 12 m along the eastern edge of the map area, adjacent to and offshore of small bedrock uplifts. (4) The fourth location, 2 km south of Stinson Beach, is notably different. The polygon on the map encloses a field that includes more than one hundred, much smaller (length less than 20 m) oval depressions and intervening sand flats, perhaps an originally much larger field that has been almost completely filled in by sediment. Similar unit Qmss rippled-scour depressions are common along this stretch of the California coast where offshore sandy sediment can be relatively thin (thus unable to fill the depressions) due to both lack of river input and to significant erosion and transport of sediment during large northwest winter swells. Although the general areas in which both unit Qmss scour depressions and surrounding mobile sand sheets occur are not likely to change substantially, the boundaries of the unit(s) are likely ephemeral, changing seasonally and during significant storm events. Areas where shelf sediments form thin (less than 2.5 m) veneers over low-relief Neogene bedrock (see below) occur in the western half of the map and are mapped as units Qms/Tsc (Santa Cruz Mudstone) and Qms/Tp? (Purisima Formation, queried). These hybrid units are recognized and delineated based on the combination of flat relief, continuity with moderate to high relief onshore or offshore bedrock outcrops, high-resolution seismic-reflection data (see field activities S-8-09-NC and L-1-06-SF), and in some cases moderate to high backscatter. The thin sediment layer is regarded as ephemeral and dynamic, and may or may not be present at a specific location based on storms, seasonal/annual patterns of sediment movement, or longer-term climate cycles. In a nearby, similarly high-energy setting, Storlazzi and others (2011) have described seasonal burial and exhumation of submerged bedrock in northern Monterey Bay. The southeastern corner of the map area includes a portion of the outer flank of the horseshoe-shaped "San Francisco Bar" (unit Qmsb), which has formed at the mouth of the San Francisco ebb-tidal delta (Barnard and others, 2007; Dallas and Barnard, 2011). This delta-mouth bar is shaped by both tidal currents and waves, resulting in a variably hummocky, mottled, and rilled seafloor, and this surface texture is used as a primary criteria for mapping the unit and defining its contacts. Map unit polygons were digitized over underlying 2-meter base layers developed from multibeam bathymetry and backscatter data (see Bathymetry--Offshore Bolinas, California and Backscattter A to E--Offshore Bolinas, California, DS 781, for more information). The bathymetry and backscatter data were collected between 2006 and 2010. This layer is part of USGS Data Series 781. In 2007, the California Ocean Protection Council initiated the California Seafloor Mapping Program (CSMP) to create a comprehensive seafloor map of high-resolution bathymetry, marine benthic habitats and geology within the 3-nautical-mile limit of California's State Waters. CSMP has divided coastal California into 110 map blocks, each to be published individually as United States Geological Survey Open-File Reports (OFRs) or Scientific Investigations Maps (SIMs) at a scale of 1:24,000. Maps display seafloor morphology and character, identify potential marine benthic habitats and illustrate both the seafloor geology and shallow (to about 100 m) subsurface geology. Data layers for bathymetry, bathymetric contours, acoustic backscatter, seafloor character, potential benthic habitat and offshore geology were created for each map block, as well as regional-scale data layers for sediment thickness, depth to transition, transgressive contours, isopachs, predicted distributions of benthic macro-invertebrates and visual observations of benthic habitat from video cruises over the entire state. These data are intended for science researchers, students, policy makers, and the general public. This information is not intended for navigational purposes.The data can be used with geographic information systems (GIS) software to display geologic and oceanographic information. Additionally, this coverage can provide a geologic map for the public and geoscience community to aid in assessments and mitigation of geologic hazards in the coastal region and sufficient geologic information for land-use and land-management decisions both onshore and offshore. This information is not intended for navigational purposes. Johnson, S.Y., Greene, H.G., Manson, M.W., Hartwell, S.R., Endris, C.A., and Watt, J.T. (2014). Geology: Offshore of Bolinas, California, 2009. California State Waters Map Series Data Catalog: U.S. Geological Survey Data Series 781. Available at: http://purl.stanford.edu/zp799xw8630. Map political location: Marin County, California Compilation scale: 1:24,000 Base maps used are hillshades generated from IfSAR, LiDAR, and multibeam mapping both onshore and offshore (see Bathymetry Hillshade--Offshore Bolinas, California, California, DS 781, for more information). References Cited Barnard, P.L., Eshelman, J., Erikson, L., and Hanes, D.M., 2007, Coastal processes study at Ocean Beach, San Francisco, CA: Summary of data collection 2004-2006: U.S. Geological Survey Open-File Report 2007-1217, 165 p. Cacchione, D.A., Drake, D.E., Grant, W.D., and Tate, G.B., 1984. Rippled scour depressions of the inner continental shelf off central California: Journal of Sedimentary Petrology, v 54, p. 1280-1291. Catuneanu, O., 2006, Principles of Sequence Stratigraphy: Amsterdam, Elsevier, 375 p. Dallas, K.L., and Barnard, P.L., 2011, Anthropogenic influences on shoreline and nearshore evolution in the San Francisco coastal system: Estuarine Coastal and Shelf Science, v. 92, p. 195-204. Gornitz, V., 2009, Sea level change, post-glacial, in Gornitz, V., ed., Encyclopedia of Paleoclimatology and Ancient Environments: Encyclopedia of Earth Sciences Series. Springer, pp. 887-893. Lambeck, K., and Chappell, J., 2001, Sea level change through the last glacial cycle: Science, v. 292, p. 679-686. Storlazzi, C.D., Fregoso, T.A., Golden, N.E., and Finlayson, D.P., 2011, Sediment dynamics and the burial and exhumation of bedrock reefs along on emergent coastline as elucidated by repretitive sonar surveys, northern Monterey Bay, CA: Marine Geology, v. 289, p. 46-59.</SPAN></P></DIV></DIV></DIV> This layer is presented in the WGS84 coordinate system for web display purposes. Downloadable data are provided in native coordinate system or projection.

    View full record

  10. Title: Faults: Offshore of Salt Point, California, 2010

    Contributors:

    Summary: This shapefile contains fault lines for the offshore area of Salt Point, California. The onshore part of the Offshore of Salt Point map area is cut by the northwest-trending San Andreas Fault, the right-lateral transform boundary between the North American and Pacific tectonic plates. The San Andreas extends extends into the offshore about 5 km south of the map area near Fort Ross, and about 50 km north of the map area on the east flank of Point Arena. The coast between Fort Ross and Point Arena, the northwesternmost exposed section west of the San Andreas Fault, is known as the "Gualala Block" (fig. 1) on the basis of its distinctive geology, which has been widely used to develop paleogeographic reconstructions of coastal California that restore as much as 150 to 180 km of right-lateral slip on the combined San Andreas and San Gregorio Fault systems (see, for example, Wentworth, (1968); Wentworth and others (1998); Jachens and others (1998); Dickinson and others (2005); Burnham (2009). The Gualala Block is underlain by a thick (as much as 9 to 11 km, in aggregate), discontinuous Upper Cretaceous to Miocene stratigraphic section (summarized in Wentworth and others, 1998), however only the Eocene and Paleocene German Rancho Formation (unit Tgr) is exposed onshore and is inferred to form seafloor bedrock outcrops in the Offshore of Salt Point map area. The German Rancho Formation consists of sandstone, mudstone, and conglomerate interpreted as deep-water, submarine-fan deposits. The western boundary of the Gualala Block lies offshore. Using seismic-reflection data, McCulloch (1987; his fig. 14) mapped a shore-parallel fault about 3 to 5 km offshore, which Dickinson and others (2005) subsequently named the Gualala Fault. Jachens and others (1998) evaluated aeromagnetic and gravity data across this zone and modeled this structure as a steep fault within the Salinian basement block, characterized by 3 to 5 km of right-lateral offset. In contrast, Dickinson and others (2005) consider the Gualala fault a Late Miocene strand of the San Andreas fault, separating Salinian and Franciscan basement rocks, with minimum right-lateral slip of 70 km. Our analysis of deeper industry seismic-reflection data within California State Waters shows the Gualala fault as a steep, northeast-dipping structure. Shallower seismic-reflection crossing the Gualala fault reveal a thick late(?) Pleistocene section characterized by recent faulting and gentle asymmetric folding. Hence, the Gualala fault appears to be a recently active "blind" structure that has deformed young sediments. Our mapping also documents a more nearshore zone of deformation that we refer to as the "east Gualala deformation zone." This zone extends through the central and southern parts of the Offshore of Salt Point map area and is similarly charcterized by steep faults and gentle folds that deform inferred late Pleistocene strata. This section of the San Andreas Fault onland has an estimated slip rate of about 17 to 25 mm/yr (Bryant and Lundberg, 2002). The devastating Great 1906 California earthquake (M 7.8) is thought to have nucleated on the San Andreas Fault about 100 kilometers south of this map area offshore of San Francisco (e.g., Bolt, 1968; Lomax, 2005), with the rupture extending northward through the onshore part of the Offshore of Salt Point map area to the south flank of Cape Mendocino (Lawson, 1908; Brown and Wolfe, 1972). Emergent marine terraces along the coast in the Offshore of Salt Point map area record recent contractional deformation associated with the San Andreas Fault system. Prentice and Kelson (2006) reported uplift rates of 0.3 to 0.6 mm/yr for a nearby late Pleistocene terrace (exposed at Fort Ross, about 5 km south of the map area) and this recent uplift must also have affected the nearshore and inner shelf, at least as far west as the Gualala fault. Faults were primarily mapped by interpretation of seismic reflection profile data (see field activity S-8-09-NC). The seismic reflection profiles were collected between 2007 and 2010. A map that shows these data is published in Open-File Report 2015–1098, "California State Waters Map Series- Offshore of Salt Point, California." This layer is a part of USGS DS 781. In 2007, the California Ocean Protection Council initiated the California Seafloor Mapping Program (CSMP) to create a comprehensive seafloor map of high-resolution bathymetry, marine benthic habitats and geology within the 3-nautical-mile limit of California's State Waters. CSMP has divided coastal California into 110 map blocks, each to be published individually as United States Geological Survey Open-File Reports (OFRs) or Scientific Investigations Maps (SIMs) at a scale of 1:24,000. Maps display seafloor morphology and character, identify potential marine benthic habitats and illustrate both the seafloor geology and shallow (to about 100 m) subsurface geology. Data layers for bathymetry, bathymetric contours, acoustic backscatter, seafloor character, potential benthic habitat and offshore geology were created for each map block, as well as regional-scale data layers for sediment thickness, depth to transition, transgressive contours, isopachs, predicted distributions of benthic macro-invertebrates and visual observations of benthic habitat from video cruises over the entire state. This coverage can be used to to aid in assessments and mitigation of geologic hazards in the coastal region and to provide sufficient geologic information for land-use and land-management decisions both onshore and offshore. These data are intended for science researchers, students, policy makers, and the general public. This information is not intended for navigational purposes.The data can be used with geographic information systems (GIS) software to display geologic and oceanographic information. Hartwell, S.R., Johnson, S.Y., and Manson, M.W. (2014). Faults: Offshore of Salt Point, California, 2010. California State Waters Map Series Data Catalog: U.S. Geological Survey Data Series 781. Available at: http://purl.stanford.edu/ns366fy6286. Map political location: Sonoma County, California Compilation scale: 1:24,000 Base maps used are hillshades generated from IfSAR, LiDAR, and multibeam mapping both onshore and offshore (see Bathymetry--Offshore of Salt Point Map Area, California). References Cited Bolt, B.A., 1968, The focus of the 1906 California earthquake: Bulletin of the Seismological Society of America, v. 58, p. 457-471. Brown, R.D., Jr., and Wolfe, E.W., 1972, Map showing recently active breaks along the San Andreas Fault between Point Delgada and Bolinas Bay, California: U.S. Geological Survey Miscellaneous Investigations Map I-692, scale 1:24,000. Bryant, W.A., and Lundberg, M.M., compilers, 2002, Fault number 1b, San Andreas fault zone, North Coast section, in Quaternary fault and fold database of the United States: U.S. Geological Survey website, accessed April 4, 2013 at http://earthquakes.usgs.gov/hazards/qfaults. Burnham, K., 2009, Predictive model of San Andreas Fault system paleogeography, Late Cretaceous to early Miocene, derived from detailed multidisciplinary conglomerate correlations: Tectonophysics 464, p. 195-208. Dickinson, W.R., Ducea, M., Rosenberg, L.I., Greene, H.G., Graham, S.A., Clark, J.C., Weber, G.E., Kidder, S., Ernst, W.G., and Brabb, E.E., 2005, Net dextral slip, Neogene San Gregorio-Hosgri Fault Zone, coastal California: Geologic evidence and tectonic implications: Geological Society of America Special Paper 391, 43 p. Jachens, R.C., Wentworth, C.M., and McLaughlin, R.J., 1998, Pre-San Andreas location of the Gualala Block inferred from magnetic and gravity anomalies, in Elder, W.P., ed., Geology and tectonics of the Gualala block, northern California: Pacific Section, Society of Economic Paleontologists and Mineralogists, Book 84, p. 27-53. Lawson, A.C., ed., 1908, The California earthquake of April 18, 1906, Report of the State Earthquake Investigation Commission: Carnegie Institution of Washington Publication 87, v. 1, 1451 p. and atlas. Lomax, A., 2005, A reanalysis of the hypocentral location and related observations for the Great 1906 California earthquake: Bulletin of the Seismological Society of America, v. 95, p. 861-877. McCulloch, D.S., 1987, Regional geology and hydrocarbon potential of offshore central California, in Scholl, D.W., Grantz, A., and Vedder, J.G., eds., Geology and Resource Potential of the Continental Margin of Western North America and Adjacent OceansâBeaufort Sea to Baja California: Houston, Texas, Circum-Pacific Council for Energy and Mineral Resources, Earth Science Series, v. 6., p. 353-401. Prentice, C.S., and Kelson, K.I., 2006, The San Andreas fault in Sonoma and Mendocino counties, in Prentice, C.S., Scotchmoor, J.G., Moores, E.M., and Kiland, J.P., eds., 1906 San Francisco Earthquake Centennial Field Guides: Field trips associated with the 100th Anniversary Conference, 18-23 April 2006, San Francisco, California: Geological Society of America Field Guide 7, p. 127-156, Wentworth, C.M., 1968, Upper Cretaceous and lower Tertiary strata near Gualala, California, and inferred large right slip on the San Andreas fault, in Dickinson, W.R., and Grantz, A., eds. Proceedings of conference on geologic problems of San Andreas fault system: Stanford University Publications, Geological Sciences, v. 11, p. 130-143. Wentworth, C.M., Jones, D.L., and Brabb, E.E., 1998, Geology and regional correlation of the Cretaceous and Paleogene rocks of the Gualala block, California, in Elder, W.P., ed., Geology and tectonics of the Gualala block, northern California: Pacific Section, Society of Economic Paleontologists and Mineralogists, Book 84, p. 3-26. This layer is presented in the WGS84 coordinate system for web display purposes. Downloadable data are provided in native coordinate system or projection.

    View full record

  11. Title: Geology: Offshore of Fort Ross, California, 2009

    Contributors:

    Summary: This polygon shapefile represents geologic features in the offshore area of Fort Ross, California. The morphology and the geology of the offshore part of the Offshore of Fort Ross map area result from the interplay between local sedimentary processes, oceanography, sea-level rise, and tectonics. The nearshore seafloor in the northern half of the map area is characterized by rocky outcrops of Tertiary sedimentary rocks (units Tgr and Tsm). This rugged nearshore zone and the inner shelf (to water depths of about 50 m) typically dip seaward about 1.5 to 2.5 degrees, whereas the mid-shelf within State Waters (about 50 to 85 m) dips more gently, about 0.4 degrees. In contrast, the nearshore to mid shelf in the southern half of the map area lies directly offshore of the mouth of the Russian River and has a more gentle, uniform dip, about 0.45 to 0.55 degrees, out to water depths of about 70 m at the outer limit of State Waters. A significant amount of the Russian River sediment load, estimated at about 900,000 metric tons/yr by Farnsworth and Warrick (2007) is deposited offshore of the river mouth, contributing to the noted north-to-south contrast in bathymetric slope. On a larger geomorphic scale, sea level has risen about 125 to 130 m over about the last 21,000 years (for example, Lambeck and Chappell, 2001; Peltier and Fairbanks, 2005), leading to broadening of the continental shelf, progressive eastward migration of the shoreline and wave-cut platform, and associated transgressive erosion and deposition. Tectonic influences impacting shelf geomorphology and geology are primarily related to the active San Andreas Fault system (see below). Given exposure to high wave energy, modern nearshore to inner-shelf sediments north of the mouth of the Russian River are mostly sand (unit Qms) and a mix of sand, gravel, and cobbles (units Qmsc and Qmsd). The more coarse-grained sands and gravels (units Qmsc and Qmsd) are primarily recognized on the basis of bathymetry and high backscatter. Both Qmsc and Qmsd typically have abrupt landward contacts with bedrock (units Tgr, Tsm, Tkfs, fsr) and form irregular to lenticular exposures that are commonly elongate in the shore-normal direction. Contacts between units Qmsc and Qms are typically gradational. Unit Qmsd forms erosional lags in scoured depressions that are bounded by relatively sharp and less commonly diffuse contacts with unit Qms horizontal sand sheets. These depressions are typically a few tens of centimeters deep and range in size from a few 10's of sq m to more than one sq km. Similar Qmsd scour depressions are common along this stretch of the California coast (see, for example, Cacchione and others, 1984; Hallenbeck and others, 2012) where surficial offshore sandy sediment is relatively thin (thus unable to fill the depressions) due to both lack of sediment supply and to erosion and transport of sediment during large northwest winter swells. Such features have been referred to as "rippled-scour depressions" (see, for example, Cacchione and others, 1984) or "sorted bedforms" (see, for example, Goff and others, 2005; Trembanis and Hume, 2011). Although the general areas in which both Qmsd scour depressions and surrounding mobile sand sheets occur are not likely to change substantially, the boundaries of the individual Qmsd depressions are likely ephemeral, changing seasonally and during significant storm events. Unit Qmsf lies offshore of unit Qms, and consists primarily of mud and muddy sand and is commonly extensively bioturbated. The water depth of the transition from sand-dominated marine sediment (unit Qms) to mud-dominated marine sediment (Qmsf) increases from about 45 to 50 m directly offshore of the mouth of the Russian River to as much as about 60 m adjacent to the rocky outcrops along the northern map boundary. This change is clearly related to the large amount of fine sediment load carried by the Russian River, which feeds a widespread, mid-shelf, mud belt that extends along the mid-shelf from Point Arena to Point Reyes (Klise, 1983; Drake and Cacchione, 1985; Demirpolat, 1991). Map unit polygons were digitized over underlying 2-meter base layers developed from multibeam bathymetry and backscatter data (see Bathymetry--Offshore Fort Ross, California and Backscattter A to C--Offshore Fort Ross, California, DS 781, for more information). The bathymetry and backscatter data were collected between 2006 and 2009. This layer is part of USGS Data Series 781. In 2007, the California Ocean Protection Council initiated the California Seafloor Mapping Program (CSMP) to create a comprehensive seafloor map of high-resolution bathymetry, marine benthic habitats and geology within the 3-nautical-mile limit of California's State Waters. CSMP has divided coastal California into 110 map blocks, each to be published individually as United States Geological Survey Open-File Reports (OFRs) or Scientific Investigations Maps (SIMs) at a scale of 1:24,000. Maps display seafloor morphology and character, identify potential marine benthic habitats and illustrate both the seafloor geology and shallow (to about 100 m) subsurface geology. Data layers for bathymetry, bathymetric contours, acoustic backscatter, seafloor character, potential benthic habitat and offshore geology were created for each map block, as well as regional-scale data layers for sediment thickness, depth to transition, transgressive contours, isopachs, predicted distributions of benthic macro-invertebrates and visual observations of benthic habitat from video cruises over the entire state. These data are intended for science researchers, students, policy makers, and the general public. This information is not intended for navigational purposes.The data can be used with geographic information systems (GIS) software to display geologic and oceanographic information. Additionally, this coverage can provide a geologic map for the public and geoscience community to aid in assessments and mitigation of geologic hazards in the coastal region and sufficient geologic information for land-use and land-management decisions both onshore and offshore. This information is not intended for navigational purposes. Johnson, S.Y., Hartwell, S.R., and Manson, M.W. (2014). Geology: Offshore of Fort Ross, California, 2009. California State Waters Map Series Data Catalog: U.S. Geological Survey Data Series 781. Available at: http://purl.stanford.edu/vd660hx5851. Map political location: San Mateo County, California Compilation scale: 1:24,000 Base maps used are hillshades generated from IfSAR, LiDAR, and multibeam mapping both onshore and offshore (see Bathymetry--Offshore of Fort Ross Map Area, California). . References Cited Cacchione, D.A., Drake, D.E., Grant, W.D., and Tate, G.B., 1984, Rippled scour depressions of the inner continental shelf off central California: Journal of Sedimentary Petrology, v. 54, p. 1,280-1,291. Demirpolat, S., 1991, Surface and near-surface sediments from the continental shelf off the Russian River, northern California: Marine Geology, v. 99, p. 163-173. Drake, D.E., and Cacchione, D.A., 1985, Seasonal variation in sediment transport on the Russian River shelf, California: Continental Shelf Research, v. 14, p. 495-514. Farnsworth, K.L., and Warrick, J.A., 2007, Sources, dispersal, and fate of fine sediment supplied to coastal California: U.S. Geological Survey Scientific Investigations Report 2007-5254, 77 p. Goff, J.A., Mayer, L.A., Traykovski, P., Buynevich, I., Wilkens, R., Raymond, R., Glang, G., Evans, R.L., Olson, H., and Jenkins, C., 2005, Detailed investigations of sorted bedforms or "rippled scour depressions", within the Marthaâs Vineyard Coastal Observatory, Massachusetts: Continental Shelf Research, v. 25, p. 461-484. Hallenbeck, T.R., Kvitek, R.G., and Lindholm, J., 2012, Rippled scour depressions add ecologically significant heterogeneity to soft-bottom habitats on the continental shelf: Marine Ecology Progress Series, v. 468, p. 119-133. Klise, D.H., 1983, Modern sedimentation on the California continental margin adjacent to the Russian River: M.S. thesis, San Jose State University, 120 p. Lambeck, K., and Chappell, J., 2001, Sea level change through the last glacial cycle: Science, v. 292, p. 679-686, doi: 10.1126/science.1059549. Peltier, W.R., and Fairbanks, R.G., 2005, Global glacial ice volume and Last Glacial Maximum duration from an extended Barbados sea level record: Quaternary Science Reviews, v. 25, p. 3,322-3,337. Trembanis, A.C., and Hume, T.M., 2011, Sorted bedforms on the inner shelf off northeastern New Zealand-Spatiotemporal relationships and potential paleo-environmental implications: Geo-Marine Letters, v. 31, p. 203-214. This layer is presented in the WGS84 coordinate system for web display purposes. Downloadable data are provided in native coordinate system or projection.

    View full record

  12. Title: Faults: Offshore of Tomales Point, California, 2010

    Contributors:

    Summary: This line shapefile depicts faults within the offshore area of Tomales Point, California. The Point Reyes Peninsula is bounded to the south and west in the offshore by the north- and east-dipping Point Reyes Thrust Fault (McCulloch, 1987; Heck and others, 1990), which lies about 20 km west of Tomales Point. Granitic basement rocks are offset about 1.4 km on this thrust fault offshore of Point Reyes (McCulloch, 1987), and this uplift combined with west-side-up offset on the San Andreas Fault (Grove and Niemi, 2005) resulted in uplift of the Point Reyes Peninsula, including Tomales Point and the adjacent continental shelf. Grove and others (2010) reported uplift rates of as much as 1 mm/yr for the south flank of the Point Reyes Peninsula based on marine terraces, but reported no datable terrace surfaces that could constrain uplift for the flight of 4-5 terraces exposed farther north along Tomales Point. Faults were primarily mapped by interpretation of seismic reflection profile data (see field activity S-15-10-NC). The seismic reflection profiles were collected between 2007 and 2010. A map that shows these data is published in Open-File Report 2015-1088, "California State Waters Map Series--Offshore of Tomales Point, California." This layer is part of USGS Data Series 781. In 2007, the California Ocean Protection Council initiated the California Seafloor Mapping Program (CSMP) to create a comprehensive seafloor map of high-resolution bathymetry, marine benthic habitats and geology within the 3-nautical-mile limit of California's State Waters. CSMP has divided coastal California into 110 map blocks, each to be published individually as United States Geological Survey Open-File Reports (OFRs) or Scientific Investigations Maps (SIMs) at a scale of 1:24,000. Maps display seafloor morphology and character, identify potential marine benthic habitats and illustrate both the seafloor geology and shallow (to about 100 m) subsurface geology. Data layers for bathymetry, bathymetric contours, acoustic backscatter, seafloor character, potential benthic habitat and offshore geology were created for each map block, as well as regional-scale data layers for sediment thickness, depth to transition, transgressive contours, isopachs, predicted distributions of benthic macro-invertebrates and visual observations of benthic habitat from video cruises over the entire state. This coverage can be used to to aid in assessments and mitigation of geologic hazards in the coastal region and to provide sufficient geologic information for land-use and land-management decisions both onshore and offshore. These data are intended for science researchers, students, policy makers, and the general public. This information is not intended for navigational purposes.The data can be used with geographic information systems (GIS) software to display geologic and oceanographic information. Hartwell, S.R., Johnson, S.Y., and Manson, M.W. (2014). Faults: Offshore of Tomales Point, California, 2010. California State Waters Map Series Data Catalog: U.S. Geological Survey Data Series 781. Available at: http://purl.stanford.edu/cn309nr7553. Map political location: San Mateo County, California Compilation scale: 1:24,000 Base maps used are hillshades generated from IfSAR, LiDAR, and multibeam mapping both onshore and offshore (see Bathymetry Hillshade--Offshore of Tomales Point, California, DS 781, for more information). References Cited Grove, K., and Niemi, T.M., 2005, Late Quaternary deformation and slip rates in the northern San Andreas fault zone at Olema Valley, Marin County, California: Tectonophysics, v. 401, p. 231-250. Grove, K, Sklar, L.S., Scherer, A.M., Lee, G., and Davis, J., 2010, Accelerating and spatially-varying crustal uplift and its geomorphic expression, San Andreas fault zone north of San Francisco, California: Tectonophysics, v. 495, p. 256-268. Heck, R.G., Edwards, E.B., Kronen, J.D., Jr., and Willingham, C.R., 1990, Petroleum potential of the offshore outer Santa Cruz and Bodega basins, California, in Garrison, R.E., Greene, H.G., Hicks, K.R., Weber, G.E., and Wright, T.L., eds. Geology and tectonics of the central California coastal region, San Francisco to Monterey: Pacific Section, American Association of Petroleum Geologists Bulletin GB67, p. 143-164. McCulloch, D.S., 1987, Regional geology and hydrocarbon potential of offshore central California, in Scholl, D.W., Grantz, A., and Vedder, J.G., eds., Geology and Resource Potential of the Continental Margin of Western North America and Adjacent Oceans Beaufort Sea to Baja California: Houston, Texas, Circum-Pacific Council for Energy and Mineral Resources, Earth Science Series, v. 6., p. 353-401. This layer is presented in the WGS84 coordinate system for web display purposes. Downloadable data are provided in native coordinate system or projection.

    View full record

  13. Title: Folds: Drakes Bay and Vicinity, California, 2009

    Contributors:

    Summary: This line shapefile represents geologic folds located in Drakes Bay and and the surrounding vicinity of California. Folds in the Drakes Bay and Vicinity map area are identified on seismic-reflection data based on abrupt truncation or warping of reflections and (or) juxtaposition of reflection panels with different seismic parameters such as reflection presence, amplitude, frequency, geometry, continuity, and vertical sequence. The Point Reyes Fault Zone runs through the map area and is an offshore curvilinear reverse fault zone with predominantly north-side-up motion (Hoskins and Griffiths, 1971; McCulloch, 1987; Heck and others, 1990; Stozek, 2012) that likely connects with the western San Gregorio fault further to the south (Ryan and others, 2008), making it part of the San Andreas Fault System. The Point Reyes Fault Zone is characterized by a 5 to 11 km-wide zone of deformation in the shallow subsurface that is associated with two main fault structures, the Point Reyes Fault and the western Point Reyes Fault. Near the Point Reyes headland, vertical displacement of granitic basement across the Point Reyes Fault is at least 1.4 km (McCulloch, 1987). Offshore Double Point, vertical displacement on the Point Reyes Fault is difficult to assess because subsurface age constraints from nearby wells are lacking, and there are few offset horizons across the fault imaged on available seismic data. However, warping and folding of Neogene strata are clearly visible on high-resolution seismic data (see field activity S-8-09-NC). The western Point Reyes Fault is defined by a broad anticlinal structure visible in both industry and high-resolution seismic datasets that exhibits that same sense of vergence (north-side-up) as the Point Reyes Fault. Folds were primarily mapped by interpretation of seismic reflection profile data (see field activity S-8-09-NC). The seismic reflection profiles were collected between 2006 in 2009. This layer is a part of USGS Data Series 781. In 2007, the California Ocean Protection Council initiated the California Seafloor Mapping Program (CSMP) to create a comprehensive seafloor map of high-resolution bathymetry, marine benthic habitats and geology within the 3-nautical-mile limit of California's State Waters. CSMP has divided coastal California into 110 map blocks, each to be published individually as United States Geological Survey Open-File Reports (OFRs) or Scientific Investigations Maps (SIMs) at a scale of 1:24,000. Maps display seafloor morphology and character, identify potential marine benthic habitats and illustrate both the seafloor geology and shallow (to about 100 m) subsurface geology. Data layers for bathymetry, bathymetric contours, acoustic backscatter, seafloor character, potential benthic habitat and offshore geology were created for each map block, as well as regional-scale data layers for sediment thickness, depth to transition, transgressive contours, isopachs, predicted distributions of benthic macro-invertebrates and visual observations of benthic habitat from video cruises over the entire state. These data are intended for science researchers, students, policy makers, and the general public. This information is not intended for navigational purposes.The data can be used with geographic information systems (GIS) software to display geologic and oceanographic information. Additionally, this coverage can provide a geologic map for the public and geoscience community to aid in assessments and mitigation of geologic hazards in the coastal region and sufficient geologic information for land-use and land-management decisions both onshore and offshore. This information is not intended for navigational purposes. Watt, J.T., Manson, M.W., and Greene, H.G. (2014). Folds: Drakes Bay and Vicinity, California, 2009. California State Waters Map Series Data Catalog: U.S. Geological Survey Data Series 781. Available at: http://purl.stanford.edu/ws324qq4526. References Cited Heck, R.G., Edwards, E.B., Kronen, J.D., Jr., and Willingham, C.R., 1990, Petroleum potential of the offshore outer Santa Cruz and Bodega basins, California, in Garrison, R.E., Greene, H.G., Hicks, K.R., Weber, G.E., and Wright, T.L., eds. Geology and tectonics of the central California coastal region, San Francisco to Monterey: Pacific Section, American Association of Petroleum Geologists Bulletin GB67, p. 143-164. Hoskins E.G., Griffiths, J.R., 1971, Hydrocarbon potential of northern and central California offshore: American Association of Petroleum Geologists Memoir 15, p. 212-228. McCulloch, D.S., 1987, Regional geology and hydrocarbon potential of offshore central California, in Scholl, D.W., Grantz, A., and Vedder, J.G., eds., Geology and Resource Potential of the Continental Margin of Western North America and Adjacent Oceans-Beaufort Sea to Baja California: Houston, Texas, Circum-Pacific Council for Energy and Mineral Resources, Earth Science Series, v. 6., p. 353-401. Ryan, H.F., Parsons, T., and Sliter, R.W., 2008, Vertical tectonic deformation associated with the San Andreas Fault offshore of San Francisco, California: Tectonophysics, v. 475, p. 209-223. Stozek, B.A., 2012, Geophysical evidence for Quaternary deformation within the offshore San Andreas fault system, northern California: Masters Thesis, San Francisco State University, 141 p. This layer is presented in the WGS84 coordinate system for web display purposes. Downloadable data are provided in native coordinate system or projection.

    View full record

  14. Title: Folds: Offshore of San Francisco, California, 2010

    Contributors:

    Summary: This line shapefile contains depicts geologic folds within the offshore area surrounding San Francisco, California. The map area straddles the right-lateral transform boundary between the North American and Pacific plates and is cut by several active faults that cumulatively form a distributed shear zone, including the San Andreas Fault, the eastern strand of the San Gregorio Fault, the Golden Gate Fault, and the Potato Patch Fault (Bruns and others, 2002; Ryan and others, 2008). These faults are covered by Holocene sediments (mostly units Qms, Qmsb, Qmst) with no seafloor expression, and are mapped using seismic-reflection data. The San Andreas Fault is the primary plate-boundary structure and extends northwest across the map area; it intersects the shoreline 10 km north of the map area at Bolinas Lagoon, and 3 km south of the map area at Mussel Rock. This section of the San Andreas Fault has an estimated slip rate of 17 to 24 mm/yr (U.S. Geological Survey, 2010), and the devastating Great 1906 California earthquake (M 7.8) is thought to have nucleated on the San Andreas a few kilometers offshore of San Francisco within the map area (Bolt, 1968; Lomax, 2005). The San Andreas Fault forms the boundary between two distinct basement terranes, Upper Jurassic to Lower Cretaceous rocks of the Franciscan Complex to the east, and Late Cretaceous granitic and older metamorphic rocks of the Salinian block to the west. Franciscan Complex rocks (unit KJf, undivided) form seafloor outcrops at and north of Point Lobos adjacent to onland exposures. The Franciscan is divided into 13 different units for the onshore portion of this geologic map based on different lithologies and ages, but the unit cannot be similarly divided in the offshore because of a lack of direct observation and (or) sampling. Folds were primarily mapped by interpretation of seismic reflection profile data (see field activities S-15-10-NC and F-2-07-NC). The seismic reflection profiles were collected between 2007 and 2010. A map that shows these data is published in Open-File Report 2015-1068, "California State Waters Map Series--Offshore of San Francisco, California." This layer is part of USGS Data Series 781. In 2007, the California Ocean Protection Council initiated the California Seafloor Mapping Program (CSMP) to create a comprehensive seafloor map of high-resolution bathymetry, marine benthic habitats and geology within the 3-nautical-mile limit of California's State Waters. CSMP has divided coastal California into 110 map blocks, each to be published individually as United States Geological Survey Open-File Reports (OFRs) or Scientific Investigations Maps (SIMs) at a scale of 1:24,000. Maps display seafloor morphology and character, identify potential marine benthic habitats and illustrate both the seafloor geology and shallow (to about 100 m) subsurface geology. Data layers for bathymetry, bathymetric contours, acoustic backscatter, seafloor character, potential benthic habitat and offshore geology were created for each map block, as well as regional-scale data layers for sediment thickness, depth to transition, transgressive contours, isopachs, predicted distributions of benthic macro-invertebrates and visual observations of benthic habitat from video cruises over the entire state. This coverage can be used to to aid in assessments and mitigation of geologic hazards in the coastal region and to provide sufficient geologic information for land-use and land-management decisions both onshore and offshore. These data are intended for science researchers, students, policy makers, and the general public. This information is not intended for navigational purposes.The data can be used with geographic information systems (GIS) software to display geologic and oceanographic information. Greene, H.G., Johnson, S.Y., Manson, M.W., Hartwell, S.R., Endris, C.A., and Bruns, T.R. (2014). Folds: Offshore of San Francisco, California, 2010. California State Waters Map Series Data Catalog: U.S. Geological Survey Data Series 781. Available at: http://purl.stanford.edu/zb566ww6047. Map political location: San Mateo County, California Compilation scale: 1:24,000 Base maps used are hillshades generated from IfSAR, LiDAR, and multibeam mapping both onshore and offshore (see Bathymetry Hillshade--Offshore San Francisco, California, DS 781, for more information). References Cited Bolt, B.A., 1968, The focus of the 1906 California earthquake: Bulletin of the Seismological Society of America, v. 58, p. 457-471. Bruns, T.R., Cooper, A.K., Carlson, P.R., and McCulloch, D.S., 2002, Structure of the submerged San Andreas and San Gregorio fault zones in the Gulf of Farallones as inferred from high-resolution seismic-reflection data, in Parsons, T. (ed.), Crustal structure of the coastal and marine San Francisco Bay region, California: U.S. Geological Survey Professional Paper 1658, p. 77-117. Lomax, A., 2005, A reanalysis of the hypocentral location and related observations for the Great 1906 California earthquake: Bulletin of the Seismological Society of America, v. 95, p. 861-877. Ryan, H.F., Parsons, T., and Sliter, R.W., 2008. Vertical tectonic deformation associated with the San Andreas fault zone offshore of San Francisco, California. Tectonophysics, 429 (1-2), p. 209-224. U.S. Geological Survey and California Geological Survey, 2010, Quaternary fault and fold database for the United States, accessed April 5, 2012, from USGS website: http://earthquake.usgs.gov/hazards/qfaults/. This layer is presented in the WGS84 coordinate system for web display purposes. Downloadable data are provided in native coordinate system or projection.

    View full record

  15. Title: Geology: Offshore of Salt Point, California, 2010

    Contributors:

    Summary: This shapefile contains geologic features within the offshore area of Salt Point, California. The morphology and the geology of the Offshore of Salt Point map area result from the interplay between local sea-level rise, sedimentary processes, oceanography, and tectonics. The offshore part of the map area extends from the shoreline to water depths of about 90 to 100 m on the mid-continental shelf; the shelfbreak occurs about 20 km farther offshore at water depths of about 200 m. The nearshore and inner shelf (to water depths of about 50 to 60 m) typically dips seaward about 1.0 to 1.5 degrees; the mid to outer shelf dips more gently, generally less than 0.5 degrees. Sea level has risen about 125 to 130 m over about the last 21,000 years (for example, Lambeck and Chappell, 2001; Peltier and Fairbanks, 2005), leading to broadening of the continental shelf, progressive eastward migration of the shoreline and wave-cut platform, and associated transgressive erosion and deposition. Land-derived sediment was carried into this dynamic setting, then subjected to full Pacific Ocean wave energy and strong currents before deposition or offshore transport. Tectonic influences impacting shelf morphology and geology are related to local faulting, folding, uplift, and subsidence (see below). Bedrock of the Eocene and Paleocene German Rancho Formation (unit Tgr) underlies much of the inner shelf, extending to water depths of as much as 60 m. Although onshore coastal outcrops of this unit are well bedded, seafloor outcrops imaged on high-resolution bathymetry have a hackly surface texture and abundant fractures. Embayments in the outer margin of the seafloor bedrock outcrops are commonly paired with the mouths of coastal watersheds and are inferred to have formed by fluvial erosion during the last sealevel lowstand. One of the more prominent embayments occurs about one kilometer north of Salt Point at the mouth of Miller Creek (fig. 1-2). These coastal watersheds are relatively small and steep, extending to a drainage divide just 2 to 3 km east of the shoreline, and are inferred sources of coarse-grained sediments. Immediately east of this onshore topographic divide, drainage along this part of the coast is captured by the northwest-flowing South Fork of the Gualala River (fig. 1-2), which runs parallel to the coast along the trace of the San Andreas fault. Given relatively shallow water depths (0 to about 50 m) and exposure to high wave energy, modern nearshore to mid-shelf sediments are mostly sand (unit Qms) and a mix of sand, gravel, and cobbles (units Qmsc and Qmsd). The more coarse-grained sands and gravels (units Qmsc and Qmsd) are primarily recognized on the basis of bathymetry and high backscatter. Both Qmsc and Qmsd typically have abrupt landward contacts with bedrock (unit Tgr) and form irregular to lenticular exposures that are commonly elongate in the shore-normal direction. Contacts between units Qmsc and Qms are typically gradational. Unit Qmsd forms erosional lags in scoured depressions that are bounded by relatively sharp and less commonly diffuse contacts with unit Qms horizontal sand sheets. These depressions are typically a few tens of centimeters deep and range in size from a few 10's of sq m to more than one sq km. Similar unit Qmsd scour depressions are common along this stretch of the California coast (see, for example, Cacchione and others, 1984; Hallenbeck and others, 2012) where surficial offshore sandy sediment is relatively thin (thus unable to fill the depressions) due to both lack of sediment supply and to erosion and transport of sediment during large northwest winter swells. Such features have been referred to as "rippled-scour depressions" (see, for example, Cacchione and others, 1984) or "sorted bedforms" (see, for example, Goff and others, 2005; Trembanis and Hume, 2011). Although the general areas in which both unit Qmsd scour depressions and surrounding mobile sand sheets occur are not likely to change substantially, the boundaries of the individual Qmsd depressions are likely ephemeral, changing seasonally and during significant storm events. The offshore decrease in slope at mid-shelf water depths (about 60 m) approximately coincides with a transition to more fine-grained marine sediments (unit Qmsf), which extends to the outer (3-nautical-mile) limit of California's State Waters. Unit Qmsf consists primarily of mud and muddy sand and is commonly extensively bioturbated. These fine-grained sediments are inferred to have been derived from from the Russian River, which has its mouth about 15 km south of the map area. Both Drake and Cacchione (1985) and Sherwood and others (1994) have documented seasonal, mid-shelf, northwest-directed, bottom currens capable of transporting fine-grained, suspended sediment from the Russian River to the Offshore of Salt Point map area. Map unit polygons were digitized over underlying 2-meter base layers developed from multibeam bathymetry and backscatter data (see Bathymetry--Offshore Salt Point, California and Backscattter--Offshore Salt Point, California, DS 781, for more information). The bathymetry and backscatter data were collected between 2006 and 2010. A map that shows these data is published in Open-File Report 2015–1098, "California State Waters Map Series- Offshore of Salt Point, California." This layer is a part of USGS DS 781. In 2007, the California Ocean Protection Council initiated the California Seafloor Mapping Program (CSMP) to create a comprehensive seafloor map of high-resolution bathymetry, marine benthic habitats and geology within the 3-nautical-mile limit of California's State Waters. CSMP has divided coastal California into 110 map blocks, each to be published individually as United States Geological Survey Open-File Reports (OFRs) or Scientific Investigations Maps (SIMs) at a scale of 1:24,000. Maps display seafloor morphology and character, identify potential marine benthic habitats and illustrate both the seafloor geology and shallow (to about 100 m) subsurface geology. Data layers for bathymetry, bathymetric contours, acoustic backscatter, seafloor character, potential benthic habitat and offshore geology were created for each map block, as well as regional-scale data layers for sediment thickness, depth to transition, transgressive contours, isopachs, predicted distributions of benthic macro-invertebrates and visual observations of benthic habitat from video cruises over the entire state. This coverage can be used to to aid in assessments and mitigation of geologic hazards in the coastal region and to provide sufficient geologic information for land-use and land-management decisions both onshore and offshore. These data are intended for science researchers, students, policy makers, and the general public. This information is not intended for navigational purposes.The data can be used with geographic information systems (GIS) software to display geologic and oceanographic information. Hartwell, S.R., Johnson, S.Y., and Manson, M.W. (2014). Geology: Offshore of Salt Point, California, 2010. California State Waters Map Series Data Catalog: U.S. Geological Survey Data Series 781. Available at: http://purl.stanford.edu/yj261gz3240. Map political location: San Mateo County, California Compilation scale: 1:24,000 Base maps used are hillshades generated from IfSAR, LiDAR, and multibeam mapping both onshore and offshore (see Bathymetry--Offshore of Salt Point Map Area, California). References Cited Cacchione, D.A., Drake, D.E., Grant, W.D., and Tate, G.B., 1984, Rippled scour depressions of the inner continental shelf off central California: Journal of Sedimentary Petrology, v. 54, p. 1,280-1,291. Drake, D.E., and Cacchione, D.A., 1985, Seasonal variation in sediment transport on the Russian River shelf, California: Continental Shelf Research, v. 14, p. 495-514. Goff, J.A., Mayer, L.A., Traykovski, P., Buynevich, I., Wilkens, R., Raymond, R., Glang, G., Evans, R.L., Olson, H., and Jenkins, C., 2005, Detailed investigations of sorted bedforms or "rippled scour depressions", within the Marthaâs Vineyard Coastal Observatory, Massachusetts: Continental Shelf Research, v. 25, p. 461-484. Hallenbeck, T.R., Kvitek, R.G., and Lindholm, J., 2012, Rippled scour depressions add ecologically significant heterogeneity to soft-bottom habitats on the continental shelf: Marine Ecology Progress Series, v. 468, p. 119-133. Lambeck, K., and Chappell, J., 2001, Sea level change through the last glacial cycle: Science, v. 292, p. 679-686, doi: 10.1126/science.1059549. Manson, M.W., Huyette, C.M., Wills, C.J., Huffman, M.E., Smelser, G.G., Fuller, M.E., Domrose, C., and Gutierrez, C., 2006, Landslides in the Highway 1 corridor between Bodega Bay and Fort Ross, Sonoma County, California: California Geological Survey Special Report 196, 26 p., 2 plates, 38 maps, scale 1:12,000. Peltier, W.R., and Fairbanks, R.G., 2005, Global glacial ice volume and Last Glacial Maximum duration from an extended Barbados sea level record: Quaternary Science Reviews, v. 25, p. 3,322-3,337. Sherwood, C.R., Butman, B., Cacchione, D.A., Drake, D.E., Gross, T.F., Sternberg, R.W., Wiberg, P.L., and Williams, A.J., III, 1994, Sediment transport events on the northern California continental shelf during the 1990-1991 STRESS experiment: Continental Shelf Research, v. 14, p. 1063-1099. Trembanis, A.C., and Hume, T.M., 2011, Sorted bedforms on the inner shelf off northeastern New Zealand-Spatiotemporal relationships and potential paleo-environmental implications: Geo-Marine Letters, v. 31, p. 203-214. This layer is presented in the WGS84 coordinate system for web display purposes. Downloadable data are provided in native coordinate system or projection.

    View full record

  16. Title: Geology: Offshore of Point Reyes, California, 2010

    Contributors:

    Summary: This polygon shapefile represents geologic features within the offshore region of Point Reyes, California. Marine geology and geomorphology was mapped in the Point Reyes offshore area from approximate Mean High Water (MHW) to the 3-nautical-mile limit of California's State Waters. MHW is defined at an elevation of 1.46 m above the North American Vertical Datum of 1988 (NAVD 88) (Weber and others, 2005). Offshore geologic units were delineated on the basis of integrated analyses of adjacent onshore geology with multibeam bathymetry and backscatter imagery, seafloor-sediment and rock samples (Reid and others, 2006), digital camera and video imagery, and high-resolution seismic-reflection profiles. The onshore bedrock mapping was compiled from Galloway (1977), Clark and Brabb (1997), and Wagner and Gutierrez (2010). Quaternary mapping was compiled from Witter and others (2006) and Wagner and Gutierrez (2010), with unit contacts modified based on analysis of 2012 LiDAR imagery; and additional Quaternary mapping by M.W. Manson. The morphology and the geology of the Offshore of Point Reyes map area result from the interplay between tectonics, sea-level rise, local sedimentary processes, and oceanography. The Point Reyes Fault Zone runs through the map area and is an offshore curvilinear reverse Fault Zone (Hoskins and Griffiths, 1971; McCulloch, 1987; Heck and others, 1990; Stozek, 2012) that likely connects with the western San Gregorio fault further to the south (Ryan and others, 2008), making it part of the San Andreas Fault System. The Point Reyes Fault Zone is characterized by a 5 to 11 km-wide zone that is associated with two main fault structures, the Point Reyes Fault and the Western Point Reyes Fault (fig. 1). Tectonic influences impacting shelf morphology and geology are related to local faulting, folding, uplift, and subsidence. Granitic basement rocks are offset about 1.4 km on the Point Reyes thrust fault offshore of the Point Reyes headland (McCulloch, 1987), and this uplift combined with west-side-up offset of the San Andreas Fault (Grove and Niemi, 2005) resulted in uplift of the Point Reyes Peninsula, including the adjacent Bodega and Tomales shelf. The Western Point Reyes Fault is defined by a broad anticlinal structure visible in both industry and high-resolution seismic datasets and exhibits that same sense of vergence as the Point Reyes Fault. The deformation associated with north-side-up motion across the Point Reyes Fault Zone has resulted in a distinct bathymetric gradient across the Point Reyes Fault, with a shallow bedrock platform to the north and east, and a deeper bedrock platform to the south. Late Pleistocene uplift of marine terraces on the southern Point Reyes Peninsula suggests active deformation west of the San Andreas Fault (Grove and others, 2010) on offshore structures. The Point Reyes Fault and related structures may be responsible for this recent uplift of the Point Reyes Peninsula, however, the distribution and age control of Pleistocene strata in the Offshore of Point Reyes map area is not well constrained and therefore it is difficult to directly link the uplift onshore with the offshore Point Reyes Fault structures. Pervasive stratal thinning within inferred uppermost Pliocene and Pleistocene (post-Purisima) units above the Western Point Reyes Fault anticline suggests Quaternary active shortening above a curvilinear northeast to north-dipping Point Reyes Fault zone. Lack of clear deformation within the uppermost Pleistocene and Holocene unit suggests activity along the Point Reyes Fault zone has diminished or slowed since 21,000 years ago. In this map area the cumulative (post-Miocene) slip-rate on the Point Reyes Fault Zone is poorly constrained, but is estimated to be 0.3 mm/yr based on vertical offset of granitic basement rocks (McCulloch, 1987; Wills and others, 2008). With the exception of the bathymetric gradient across the Point Reyes Fault, the offshore part of this map area is largely characterized by a relatively flat (<0.8°) bedrock platform. The continental shelf is quite wide in this area, with the shelfbreak located west of the Farallon high , about 35 km offshore. Sea level has risen about 125 to 130 m over about the last 21,000 years (for example, Lambeck and Chappell, 2001; Peltier and Fairbanks, 2005), leading to broadening of the continental shelf, progressive eastward migration of the shoreline and wave-cut platform, and associated transgressive erosion and deposition (for example, Catuneanu, 2006). Land-derived sediment was carried into this dynamic setting, and then subjected to full Pacific Ocean wave energy and strong currents before deposition or offshore transport. Much of the inner shelf bedrock platform is composed of Tertiary marine sedimentary rocks, which are underlain by Salinian granitic and metamorphic basement rocks, including the Late Cretaceous porphyritic granite (unit Kgg), which outcrops on the seafloor south of the Point Reyes headland. Unit Kgg appears complexly fractured, similar to onshore exposures, with a distinct massive, bulbous texture in multibeam imagery. The Tertiary strata overlying the granite form the core of the Point Reyes syncline (Weaver, 1949) and include the early Eocene Point Reyes Conglomerate (unit Tpr), mid- to late Miocene Monterey Formation (unit Tm), late Miocene Santa Margarita Formation (unit Tsm), late Miocene Santa Cruz Mudstone (unit Tsc), and late Miocene to early Pliocene Purisima Formation (unit Tp). The Point Reyes Conglomerate is exposed on the seafloor adjacent to onshore outcrops on the Point Reyes headland and has a distinct massive texture with some bedding planes visible, but the strata are highly fractured. Based on stratigraphic correlations from seismic reflection data and onshore wells, combined with multibeam imagery, we infer rocks of the early Eocene Point Reyes Conglomerate extend at least 6 km northwest from onshore exposures at Point Reyes headland. The absence of unit Tsc in onshore wells (Clark and Brabb, 1997) suggests these rocks are unlikely to occur within the Tertiary section of this map area, north of the Point Reyes Fault. In this map area, unit Tu represents seafloor outcrops of a middle Miocene to upper Pliocene sequence overlying unit Tpr, that may include units Tm, Tsm, and Tp. Seafloor exposures of unit Tu are characterized by distinct rhythmic bedding where beds are dipping and by a mottled texture where those beds become flat-lying. Modern nearshore sediments are mostly sand (unit Qms and Qsw) and a mix of sand, gravel, and cobbles (units Qmsc and Qmsd). The more coarse-grained sands and gravels (units Qmsc and Qmsd) are primarily recognized on the basis of bathymetry and high backscatter. The emergent bedrock platform north and west of the Point Reyes headland is heavily scoured, resulting in large areas of unit Qmsc and associated Qmsd. Both Qmsc and Qmsd typically have abrupt landward contacts with bedrock and form irregular to lenticular exposures that are commonly elongate in the shore-normal direction. Contacts between units Qmsc and Qms are typically gradational. Unit Qmsd forms erosional lags in scoured depressions that are bounded by relatively sharp and less commonly diffuse contacts with unit Qms horizontal sand sheets. These depressions are typically a few tens of centimeters deep and range in size from a few 10's of meters to more than 1 km2. There is an area of high-backscatter, and rough seafloor southeast of the Point Reyes headland that is notable in that it includes several small, irregular "lumps", with as much as 1 m of positive relief above the seafloor (unit Qsr). Unit Qsr occurs in water depths between 50 and 60 meters, with individual lumps randomly distributed to west-trending. This area on seismic-reflection data shows this lumpy material rests on several meters of latest Pleistocene to Holocene sediment and is thus not bedrock outcrop. Rather, it seems likely that this lumpy material is marine debris, possibly derived from one (or more) of the more than 60 shipwrecks offshore of the Point Reyes Peninsula between 1849 and 1940 (National Park Service, 2012). It is also conceivable that this lumpy terrane consists of biological "hardgrounds". Video transect data crossing unit Qsr near the Point Reyes headland was of insufficient quality to distinguish between these above alternatives. A transition to more fine-grained marine sediments (unit Qmsf) occurs around 50â60 m depth within most of the map area, however, directly south and east of Drakes Estero, backscatter and seafloor sediment samples (Chin and others, 1997) suggest fine-grained sediments extend into water depths as shallow as 30 m. Unit Qmsf is commonly extensively bioturbated and consists primarily of mud and muddy sand. These fine-grained sediments are inferred to have been derived from the Drakes Estero estuary or from the San Francisco Bay to the south, via predominantly northwest flow at the seafloor (Noble and Gelfenbaum, 1990). The map that show these data are published in Open-File Report 2015-1114, "California State Waters Map Series—Offshore of Point Reyes, California." This layer is part of USGS Data Series 781. In 2007, the California Ocean Protection Council initiated the California Seafloor Mapping Program (CSMP) to create a comprehensive seafloor map of high-resolution bathymetry, marine benthic habitats and geology within the 3-nautical-mile limit of California's State Waters. CSMP has divided coastal California into 110 map blocks, each to be published individually as United States Geological Survey Open-File Reports (OFRs) or Scientific Investigations Maps (SIMs) at a scale of 1:24,000. Maps display seafloor morphology and character, identify potential marine benthic habitats and illustrate both the seafloor geology and shallow (to about 100 m) subsurface geology. Data layers for bathymetry, bathymetric contours, acoustic backscatter, seafloor character, potential benthic habitat and offshore geology were created for each map block, as well as regional-scale data layers for sediment thickness, depth to transition, transgressive contours, isopachs, predicted distributions of benthic macro-invertebrates and visual observations of benthic habitat from video cruises over the entire state. This coverage can be used to to aid in assessments and mitigation of geologic hazards in the coastal region and to provide sufficient geologic information for land-use and land-management decisions both onshore and offshore. These data are intended for science researchers, students, policy makers, and the general public. This information is not intended for navigational purposes.The data can be used with geographic information systems (GIS) software to display geologic and oceanographic information. Watt, J.T., Manson, M.W., and Greene, H.G. (2014). Geology: Offshore of Point Reyes, California, 2010. California State Waters Map Series Data Catalog: U.S. Geological Survey Data Series 781. Available at: http://purl.stanford.edu/fr148tw1471. Map political location: Marin County, California Compilation scale: 1:24,000 Base maps used are hillshades generated from IfSAR, LiDAR, and multibeam mapping both onshore and offshore. References Cited Catuneanu, O., 2006, Principles of Sequence Stratigraphy: Amsterdam, Elsevier, 375 p. Chin, J.L., Karl, H.A., and Maher, N.M., 1997, Shallow subsurface geology of the continental shelf, Gulf of the Farallones, California, and its relationship to surficial seafloor characteristics: Marine Geology, v. 137, p. 251-269. Clark, J.C., and Brabb, E.E., 1997, Geology of the Point Reyes National Seashore and vicinity: U.S. Geological Survey Open-File Report 97-456, scale 1:48,000. Galloway, A.J., 1977, Geology of the Point Reyes Peninsula Marin County, California: California Geological Survey Bulletin 202, scale 1:24,000. Grove, K. and Niemi, T., 2005, Late Quaternary deformation and slip rates in the northern San Andreas fault zone at Olema Valley, Marin County, California: Tectonophysics, v. 401, p. 231-250. Grove, K., Sklar, L.S., Scherer, A.M., Lee, G., and Davis, J., 2010, Accelerating and spatially-varying crustal uplift and its geomorphic expression, San Andreas Fault zone north of San Francisco, California: Tectonophysics, v. 495, p. 256-268. Heck, R.G., Edwards, E.B., Kronen, J.D., Jr., and Willingham, C.R., 1990, Petroleum potential of the offshore outer Santa Cruz and Bodega basins, California, in Garrison, R.E., Greene, H.G., Hicks, K.R., Weber, G.E., and Wright, T.L., eds. Geology and tectonics of the central California coastal region, San Francisco to Monterey: Pacific Section, American Association of Petroleum Geologists Bulletin GB67, p. 143-164. Hoskins E.G., Griffiths, J.R., 1971, Hydrocarbon potential of northern and central California offshore: American Association of Petroleum Geologists Memoir 15, p. 212-228. Lambeck, K., and Chappell, J., 2001, Sea level change through the last glacial cycle: Science, v. 292, p. 679-686, doi: 10.1126/science.1059549. McCulloch, D.S., 1987, Regional geology and hydrocarbon potential of offshore Central California, in Scholl, D.W., Grantz, A., and Vedder, J.G., eds., Geology and resource potential of the continental margin of Western North America and adjacent ocean basins Beaufort Sea to Baja California: Circum-Pacific Council for Energy and Mineral Resources Earth Science Series, v. 6, p. 353-401. National Park Service, 2012, Shipwrecks at Point Reyes, available at: http://www.nps.gov/pore/historyculture/upload/map_shipwrecks.pdf Noble, M.A. and Gelfenbaum, G., 1990, A pilot study of currents and suspended sediment in the Gulf of the Farallones: U.S. Geological Survey Open-File Report 90-476, 30 p. Peltier, W.R., and Fairbanks, R.G., 2006, Global glacial ice volume and Last Glacial Maximum duration from an extended Barbados sea level record: Quaternary Science Reviews, v. 25, p. 3,322-3,337. Reid, J.A., Reid, J.M., Jenkins, C.J., Zimmerman, M., Williams, S.J., and Field, M.E., 2006, usSEABED Pacific Coast (California, Oregon, Washington) offshore surficial-sediment data release: U.S. Geological Survey Data Series 182, available at http://pubs.usgs.gov/ds/2006/182/. Ryan, H.F., Parsons, T., and Sliter, R.W., 2008, Vertical tectonic deformation associated with the San Andreas Fault offshore of San Francisco, California: Tectonophysics, v. 475, p. 209-223. Stozek, B.A., 2012, Geophysical evidence for Quaternary deformation within the offshore San Andreas fault system, northern California: Masters Thesis, San Francisco State University, 141 p. Wagner, D.L., and Gutierrez, C.I., 2010, Preliminary Geologic Map of the Napa 30â x 60â Quadrangle, California: California Geological Survey, scale 1:100,000. Weber, K.M., List, J.H., and Morgan, K.L., 2005, An operational Mean High Water datum for determination of shoreline position from topographic lidar data: U.S. Geological Survey Open-File Report 2005 1027, accessed April 5, 2011, at http://pubs.usgs.gov/of/2005/1027/. Wills, C.J., Weldon, R.J., II, and Bryant, W.A., 2008, Appendix A California fault parameters for the National Seismic Hazard Maps and Working Group on California Earthquake Probabilities 2007: U.S. Geological Survey Open-File Report 2007 1437A, 48 p., available at http://pubs.usgs.gov/of/2007/1437/a/. Witter, R.C., Knudsen, K.L., Sowers, J.M., Wentworth, C.M., Koehler, R.D., Randolph, C.E., Brooks, S.K., and Gans, K.D., 2006, Maps of Quaternary Deposits and Liquefaction Susceptibility in the Central San Francisco Bay Region, California, U.S. Geological Survey Open-File Report 06-1037, scale 1:24,000.Bulletin of the Seismological Society of America, v. 95, p. 861-877. This layer is presented in the WGS84 coordinate system for web display purposes. Downloadable data are provided in native coordinate system or projection.

    View full record

  17. Title: Faults: Offshore of Pacifica, California, 2010

    Contributors:

    Summary: This line shapefile contains fault lines in the offshore area of Pacifica, California. These data were generated from data collected by California State University, Monterey Bay, Seafloor Mapping Lab (CSUMB), by the U.S. Geological Survey (USGS) and by Fugro Pelagos. The Offshore of Pacifica map area straddles the right-lateral transform boundary between the North American and Pacific plates and is cut by several active faults that cumulatively form a distributed shear zone, including the San Andreas Fault, the eastern strand of the San Gregorio Fault, the Golden Gate Fault, and the Potato Patch Fault (sheets 8, 9; Bruns and others, 2002; Ryan and others, 2008). These faults are covered by Holocene sediments (mostly units Qms, Qmsb, Qmst) with no seafloor expression, and are mapped using seismic-reflection data (sheet 8). The San Andreas Fault is the primary plate-boundary structure and extends northwest across the map area; it intersects the shoreline 10 km north of the map area at Pacifica Lagoon, and 3 km south of the map area at Mussel Rock. This section of the San Andreas Fault has an estimated slip rate of 17 to 24 mm/yr (U.S. Geological Survey, 2010), and the devastating Great 1906 California earthquake (M 7.8) is thought to have nucleated on the San Andreas a few kilometers offshore of San Francisco within the map area (sheet 9; Bolt, 1968; Lomax, 2005). The San Andreas Fault forms the boundary between two distinct basement terranes, Upper Jurassic to Lower Cretaceous rocks of the Franciscan Complex to the east, and Late Cretaceous granitic and older metamorphic rocks of the Salinian block to the west. Franciscan Complex rocks (unit KJf, undivided) form seafloor outcrops at and north of Point Lobos adjacent to onland exposures. The Franciscan is divided into 13 different units for the onshore portion of this geologic map based on different lithologies and ages, but the unit cannot be similarly divided in the offshore because of a lack of direct observation and (or) sampling. Faults were primarily mapped by interpretation of seismic reflection profile data (see S-15-10-NC and F-2-07-NC). The seismic reflection profiles were collected between 2007 and 2010. A map which shows these data is published in Scientific Investigations Map 3302, "California State Waters Map Series--Offshore of Coal Oil Point, California." This layer is part of USGS Data Series 781. In 2007, the California Ocean Protection Council initiated the California Seafloor Mapping Program (CSMP) to create a comprehensive seafloor map of high-resolution bathymetry, marine benthic habitats and geology within the 3-nautical-mile limit of California's State Waters. CSMP has divided coastal California into 110 map blocks, each to be published individually as United States Geological Survey Open-File Reports (OFRs) or Scientific Investigations Maps (SIMs) at a scale of 1:24,000. Maps display seafloor morphology and character, identify potential marine benthic habitats and illustrate both the seafloor geology and shallow (to about 100 m) subsurface geology. Data layers for bathymetry, bathymetric contours, acoustic backscatter, seafloor character, potential benthic habitat and offshore geology were created for each map block, as well as regional-scale data layers for sediment thickness, depth to transition, transgressive contours, isopachs, predicted distributions of benthic macro-invertebrates and visual observations of benthic habitat from video cruises over the entire state. These data are intended for science researchers, students, policy makers, and the general public. This information is not intended for navigational purposes.The data can be used with geographic information systems (GIS) software to display geologic and oceanographic information. Additionally, this coverage can provide a geologic map for the public and geoscience community to aid in assessments and mitigation of geologic hazards in the coastal region and sufficient geologic information for land-use and land-management decisions both onshore and offshore. Greene, H.G., Hartwell, S.R., Manson, M.W., Johnson, S.Y., Dieter, B.E., Phillips, E.L., and Watt, J.T. (2014). Faults: Offshore of Pacifica, California, 2010. California State Waters Map Series Data Catalog: U.S. Geological Survey Data Series 781. Available at: http://purl.stanford.edu/rq178pr7048. Map political location: San Mateo County, California Compilation scale: 1:24,000 Base maps used are hillshades generated from IfSAR, LiDAR, and multibeam mapping both onshore and offshore (see Bathymetry--Offshore of Pacifica map area, California, DS 781, for more information). References Cited Bolt, B.A., 1968, The focus of the 1906 California earthquake: Bulletin of the Seismological Society of America, v. 58, p. 457-471. Bruns, T.R., Cooper, A.K., Carlson, P.R., and McCulloch, D.S., 2002, Structure of the submerged San Andreas and San Gregorio fault zones in the Gulf of Farallones as inferred from high-resolution seismic-reflection data, in Parsons, T. (ed.), Crustal structure of the coastal and marine San Francisco Bay region, California: U.S. Geological Survey Professional Paper 1658, p. 77-117. Lomax, A., 2005, A reanalysis of the hypocentral location and related observations for the Great 1906 California earthquake: Bulletin of the Seismological Society of America, v. 95, p. 861-877. Ryan, H.F., Parsons, T., and Sliter, R.W., 2008. Vertical tectonic deformation associated with the San Andreas fault zone offshore of San Francisco, California. Tectonophysics, 429 (1-2), p. 209-224. U.S. Geological Survey and California Geological Survey, 2010, Quaternary fault and fold database for the United States, accessed April 5, 2012, from USGS website: http://earthquake.usgs.gov/hazards/qfaults/. This layer is presented in the WGS84 coordinate system for web display purposes. Downloadable data are provided in native coordinate system or projection.

    View full record

  18. Title: Folds: Offshore of Bodega Head, California, 2010

    Contributors:

    Summary: This line shapefile contains geologic folds of the offshore area of Bodega Head in California. Onshore investigations indicate that this section of the San Andreas Fault onland has an estimated slip rate of about 17 to 25 mm/yr (Bryant and Lundberg, 2002). Emergent marine terraces at Bodega Bay record uplift rates associated with the fault system of about 0.1 mm/yr (Landis and others, 2004). The devastating Great 1906 California earthquake (M 7.8) is thought to have nucleated on the San Andreas Fault about 70 kilometers south of this map area offshore of San Francisco (e.g., Bolt, 1968; Lomax, 2005), with the rupture extending northward through the Offshore of Bodega Head map area to the south flank of Cape Mendocino. Folds were primarily mapped by interpretation of seismic reflection profile data (see field activity S-15-10-NC). The seismic reflection profiles were collected in 2010. This layer is part of USGS Data Series 781. In 2007, the California Ocean Protection Council initiated the California Seafloor Mapping Program (CSMP) to create a comprehensive seafloor map of high-resolution bathymetry, marine benthic habitats and geology within the 3-nautical-mile limit of California's State Waters. CSMP has divided coastal California into 110 map blocks, each to be published individually as United States Geological Survey Open-File Reports (OFRs) or Scientific Investigations Maps (SIMs) at a scale of 1:24,000. Maps display seafloor morphology and character, identify potential marine benthic habitats and illustrate both the seafloor geology and shallow (to about 100 m) subsurface geology. Data layers for bathymetry, bathymetric contours, acoustic backscatter, seafloor character, potential benthic habitat and offshore geology were created for each map block, as well as regional-scale data layers for sediment thickness, depth to transition, transgressive contours, isopachs, predicted distributions of benthic macro-invertebrates and visual observations of benthic habitat from video cruises over the entire state. This coverage can be used to aid in assessments and mitigation of geologic hazards in the coastal region and to provide sufficient geologic information for land-use and land-management decisions both onshore and offshore. These data are intended for science researchers, students, policy makers, and the general public. This information is not intended for navigational purposes.The data can be used with geographic information systems (GIS) software to display geologic and oceanographic information. Additionally, this coverage can provide a geologic map for the public and geoscience community to aid in assessments and mitigation of geologic hazards in the coastal region and sufficient geologic information for land-use and land-management decisions both onshore and offshore. This information is not intended for navigational purposes. Johnson, S.Y., Hartwell, S.R., and Manson, M.W. (2014). Folds: Offshore of Bodega Head, California, 2010. California State Waters Map Series Data Catalog: U.S. Geological Survey Data Series 781. Available at: http://purl.stanford.edu/tc897cx2816. Map political location: San Mateo County, California Compilation scale: 1:24,000 Base maps used are hillshades generated from IfSAR, LiDAR, and multibeam mapping both onshore and offshore (see Bathymetry Hillshade--Offshore Bodega Head, California, California, DS 781, for more information). References Cited Bolt, B.A., 1968, The focus of the 1906 California earthquake: Bulletin of the Seismological Society of America, v. 58, p. 457-471. Bryant, W.A., and Lundberg, M.M., compilers, 2002, Fault number 1b, San Andreas fault zone, North Coast section, in Quaternary fault and fold database of the United States: U.S. Geological Survey website, accessed April 4, 2013, at http://earthquakes.usgs.gov/hazards/qfaults. Landis, P.S., Gardner, T.W., and Merritts, D.J., 2004, Deformation of marine terraces along the western edge of the North American Plate, Bodega Bay to the Russian River, CA: Geological Society of America Abstracts with Programs, South-Central Section, Paper 6-3. Lomax, A., 2005, A reanalysis of the hypocentral location and related observations for the Great 1906 California earthquake: Bulletin of the Seismological Society of America, v. 95, p. 861-877. This layer is presented in the WGS84 coordinate system for web display purposes. Downloadable data are provided in native coordinate system or projection.

    View full record

  19. Title: Faults: Offshore of Bodega Head, California, 2010

    Contributors:

    Summary: This line shapefile represents fault lines within the offshore area of Bodega Head in California. Onshore investigations indicate that this section of the San Andreas Fault onland has an estimated slip rate of about 17 to 25 mm/yr (Bryant and Lundberg, 2002). Emergent marine terraces at Bodega Bay record uplift rates associated with the fault system of about 0.1 mm/yr (Landis and others, 2004). The devastating Great 1906 California earthquake (M 7.8) is thought to have nucleated on the San Andreas Fault about 70 kilometers south of this map area offshore of San Francisco (e.g., Bolt, 1968; Lomax, 2005), with the rupture extending northward through the Offshore of Bodega Head map area to the south flank of Cape Mendocino. Faults were primarily mapped by interpretation of seismic reflection profile data (see field activity S-15-10-NC). The seismic reflection profiles were collected in 2010. This layer is part of USGS Data Series 781. In 2007, the California Ocean Protection Council initiated the California Seafloor Mapping Program (CSMP) to create a comprehensive seafloor map of high-resolution bathymetry, marine benthic habitats and geology within the 3-nautical-mile limit of California's State Waters. CSMP has divided coastal California into 110 map blocks, each to be published individually as United States Geological Survey Open-File Reports (OFRs) or Scientific Investigations Maps (SIMs) at a scale of 1:24,000. Maps display seafloor morphology and character, identify potential marine benthic habitats and illustrate both the seafloor geology and shallow (to about 100 m) subsurface geology. Data layers for bathymetry, bathymetric contours, acoustic backscatter, seafloor character, potential benthic habitat and offshore geology were created for each map block, as well as regional-scale data layers for sediment thickness, depth to transition, transgressive contours, isopachs, predicted distributions of benthic macro-invertebrates and visual observations of benthic habitat from video cruises over the entire state. This coverage can be used to aid in assessments and mitigation of geologic hazards in the coastal region and to provide sufficient geologic information for land-use and land-management decisions both onshore and offshore. These data are intended for science researchers, students, policy makers, and the general public. This information is not intended for navigational purposes.The data can be used with geographic information systems (GIS) software to display geologic and oceanographic information. Additionally, this coverage can provide a geologic map for the public and geoscience community to aid in assessments and mitigation of geologic hazards in the coastal region and sufficient geologic information for land-use and land-management decisions both onshore and offshore. This information is not intended for navigational purposes. Johnson, S.Y., Hartwell, S.R., and Manson, M.W. (2014). Faults: Offshore of Bodega Head, California, 2010. California State Waters Map Series Data Catalog: U.S. Geological Survey Data Series 781. Available at: http://purl.stanford.edu/xc794cy1588. Map political location: San Mateo County, California Compilation scale: 1:24,000 Base maps used are hillshades generated from IfSAR, LiDAR, and multibeam mapping both onshore and offshore (see Bathymetry Hillshade--Offshore of Bodega Head, California, DS 781, for more information). References Cited Bolt, B.A., 1968, The focus of the 1906 California earthquake: Bulletin of the Seismological Society of America, v. 58, p. 457-471. Bryant, W.A., and Lundberg, M.M., compilers, 2002, Fault number 1b, San Andreas fault zone, North Coast section, in Quaternary fault and fold database of the United States: U.S. Geological Survey website, accessed April 4, 2013, at http://earthquakes.usgs.gov/hazards/qfaults. Landis, P.S., Gardner, T.W., and Merritts, D.J., 2004, Deformation of marine terraces along the western edge of the North American Plate, Bodega Bay to the Russian River, CA: Geological Society of America Abstracts with Programs, South-Central Section, Paper 6-3. Lomax, A., 2005, A reanalysis of the hypocentral location and related observations for the Great 1906 California earthquake: Bulletin of the Seismological Society of America, v. 95, p. 861-877. This layer is presented in the WGS84 coordinate system for web display purposes. Downloadable data are provided in native coordinate system or projection.

    View full record

  20. Title: Geology: Offshore of Bodega Head, California, 2010

    Contributors:

    Summary: This polygon shapefile represents geologic features of the offshore area of Bodega Head in California. The morphology and the geology of the map area result from the interplay between tectonics, sea-level rise, local sedimentary processes, and oceanography. The Offshore of Bodega Head map area is cut by the northwest-trending San Andreas Fault, the right-lateral transform boundary between the North American and Pacific tectonic plates. From southeast to northwest, this fault extends through Bodega Bay and Bodega Harbor, crosses the Bodega Head isthmus at the mouth of Salmon Creek, and extends in the offshore for about 20 km before passing onland at Fort Ross, about 12 km north of the Offshore of Bodega Head map area. The San Andreas Fault juxtaposes Cretaceous granitic rock on the southwest with the Jurassic, Cretaceous, and early Tertiary Franciscan Complex on the northeast. Uplift of the granitic rock (unit Kg) on the west side of the San Andreas Fault has created extensive, rugged, rocky seafloor, centered offshore Bodega Head and extending northwest for about 15 km, from the western flank of Bodega Bay to the shelf offshore of the mouth of Salmon Creek. At its south and north ends this rocky seafloor extends to water depths of about 40 m and 50 m, respectively where it is onlapped by young sediment (see below); offshore of Bodega Head, the rocky seafloor extends to water depths of 80 m. Northeast of the San Andreas Fault, offshore rocky outcrops of the Franciscan complex (units Kfs, Kjfss, fsr) occur only in the nearshore (water depths less than 15 m). Sediment-covered areas of the offshore part of the map occur in gently sloping (less than about 1 degree) nearshore, inner-, and mid-shelf environments. Sediment supply to the shelf north and west of Bodega Head is predominantly from coastal watersheds including the Russian River (4.5 km north of the map area) and Salmon Creek. Sediment supply to Bodega Bay and the shelf in the southern part of the map area is from small coastal watersheds and estuaries such as Estero Americano and Estero de San Antonio, and most likely from sediment flux out of the mouth of Tomales Bay, located two kilometers south of the map area. Shelf morphology and evolution largely reflects eustacy; sea level has risen about 125 to 130 m over about the last 21,000 years (for example, Lambeck and Chappell, 2001; Peltier and Fairbanks, 2005), leading to broadening of the continental shelf, progressive eastward migration of the shoreline and wave-cut platform, and associated transgressive erosion and deposition. Given present exposure to high wave energy, modern nearshore to inner-shelf sediments are mostly sand (unit Qms) and a mix of sand, gravel, and cobbles (units Qmsc and Qmsd). The more coarse-grained sands and gravels (units Qmsc and Qmsd) are primarily recognized on the basis of bathymetry and high backscatter. Unit Qmsc occurs in two areas: (1) as a linear nearshore bar (water depth less than 10 m) offshore of Salmon Creek - the eastern contact of this unit is queried because of the lack of data in the surf zone; and (2) as a west-trending bar at the north end of Bodega Bay. Unit Qmsd forms erosional lags in scoured depressions that are bounded by relatively sharp contacts with bedrock or sharp to diffuse contacts with unit Qms. These scoured depressions are typically a few tens of centimeters deep and range in size from a few 10's of sq m to more than one sq km. Similar unit Qmsd scour depressions are common along this stretch of the California coast (see, for example, Cacchione and others, 1984; Hallenbeck and others, 2012) where surficial offshore sandy sediment is relatively thin (thus unable to fill the depressions) due to both lack of sediment supply and to erosion and transport of sediment during large northwest winter swells. Such features have been referred to as "rippled-scour depressions" (see, for example, Cacchione and others, 1984) or "sorted bedforms" (see, for example, Goff and others, 2005; Trembanis and Hume, 2011). Although the general areas in which both unit Qmsd scour depressions and surrounding mobile sand sheets occur are not likely to change substantially, the boundaries of the individual Qmsd depressions are likely ephemeral, changing seasonally and during significant storm events. Unit Qmsf lies offshore of unit Qms, consists primarily of mud and muddy sand and is commonly extensively bioturbated. The water depth of the transition from sand-dominated marine sediment (unit Qms) to mud-dominated marine sediment (Qmsf) occurs at depths of about 45 to 50 m except offshore of Bodega Head where seafloor bedrock outcrops extend to depths of 80 m at the outer limit of California's State Waters. The smooth seafloor in the northern part of the map area between water depths of 40 m and 70 m notably includes an about 3-km-wide field of elongate, shore-normal, paired sediment lobes and chutes (unit Qmsl). Individual lobes within the field are as much as 1,000-m long and 150-m wide, and have as much as 2 m of relief above the surrounding smooth seafloor. This sediment-lobe field lies just one kilometer west of the San Andreas Fault and we infer that large earthquakes on this structure generated strong ground motions and slope failures, mobilizing small sediment flows that moved down the gentle slope and were deposited as lobes. Unit Qmsl also occurs as a 250-m-wide field of four discrete lobes and paired arcuate, low-relief scours on the south flank of a west-trending bar in northern Bodega Bay. Map unit polygons were digitized over underlying 2-meter base layers developed from multibeam bathymetry and backscatter data (see Bathymetry--Offshore Bodega Head, California and Backscattter A to C--Offshore Bodega Head, California, DS 781, for more information). The bathymetry and backscatter data were collected between 2007 and 2010. This layer is part of USGS Data Series 781. In 2007, the California Ocean Protection Council initiated the California Seafloor Mapping Program (CSMP) to create a comprehensive seafloor map of high-resolution bathymetry, marine benthic habitats and geology within the 3-nautical-mile limit of California's State Waters. CSMP has divided coastal California into 110 map blocks, each to be published individually as United States Geological Survey Open-File Reports (OFRs) or Scientific Investigations Maps (SIMs) at a scale of 1:24,000. Maps display seafloor morphology and character, identify potential marine benthic habitats and illustrate both the seafloor geology and shallow (to about 100 m) subsurface geology. Data layers for bathymetry, bathymetric contours, acoustic backscatter, seafloor character, potential benthic habitat and offshore geology were created for each map block, as well as regional-scale data layers for sediment thickness, depth to transition, transgressive contours, isopachs, predicted distributions of benthic macro-invertebrates and visual observations of benthic habitat from video cruises over the entire state. This coverage can be used to aid in assessments and mitigation of geologic hazards in the coastal region and to provide sufficient geologic information for land-use and land-management decisions both onshore and offshore. These data are intended for science researchers, students, policy makers, and the general public. The data can be used with geographic information systems (GIS) software to display geologic and oceanographic information. Additionally, this coverage can provide a geologic map for the public and geoscience community to aid in assessments and mitigation of geologic hazards in the coastal region and sufficient geologic information for land-use and land-management decisions both onshore and offshore. This information is not intended for navigational purposes. Johnson, S.Y., Hartwell, S.R., and Manson, M.W. (2014). Geology: Offshore of Bodega Head, California, 2010. California State Waters Map Series Data Catalog: U.S. Geological Survey Data Series 781. Available at: http://purl.stanford.edu/gv736fn4719. Map political location: San Mateo County, California Compilation scale: 1:24,000 Base maps used are hillshades generated from IfSAR, LiDAR, and multibeam mapping both onshore and offshore (see Bathymetry Hillshade--Offshore Bodega Head, California, California, DS 781, for more information). References Cited Cacchione, D.A., Drake, D.E., Grant, W.D., and Tate, G.B., 1984, Rippled scour depressions of the inner continental shelf off central California: Journal of Sedimentary Petrology, v. 54, p. 1,280-1,291. Goff, J.A., Mayer, L.A., Traykovski, P., Buynevich, I., Wilkens, R., Raymond, R., Glang, G., Evans, R.L., Olson, H., and Jenkins, C., 2005, Detailed investigations of sorted bedforms or "rippled scour depressions", within the Marthaâs Vineyard Coastal Observatory, Massachusetts: Continental Shelf Research, v. 25, p. 461-484. Hallenbeck, T.R., Kvitek, R.G., and Lindholm, J., 2012, Rippled scour depressions add ecologically significant heterogeneity to soft-bottom habitats on the continental shelf: Marine Ecology Progress Series, v. 468, p. 119-133. Lambeck, K., and Chappell, J., 2001, Sea level change through the last glacial cycle: Science, v. 292, p. 679-686, doi: 10.1126/science.1059549. Peltier, W.R., and Fairbanks, R.G., 2006, Global glacial ice volume and Last Glacial Maximum duration from an extended Barbados sea level record: Quaternary Science Reviews, v. 25, p. 3,322-3,337. Trembanis, A.C., and Hume, T.M., 2011, Sorted bedforms on the inner shelf off northeastern New Zealand-Spatiotemporal relationships and potential paleo-environmental implications: Geo-Marine Letters, v. 31, p. 203-214. This layer is presented in the WGS84 coordinate system for web display purposes. Downloadable data are provided in native coordinate system or projection.

    View full record

Need help?

Ask GIS