Search for geospatial/GIS data

Find GIS data held at MIT and other institutions

1,172 results returned

  1. Title: Bedrock geology of the Cook-Side Lake area, St Louis and Itasca Counties, Minnesota, M-75

    Contributors:

    Summary: Interpretations of bedrock geology (distribution of rock at the land surface and beneath surface sediments), Cook-Side Lake area, scale 1:48,000.

    View full record

  2. Title: Geology and geophysics of the Denham-Mahtowa area, east-central Minnesota, M-63

    Contributors:

    Summary: Bedrock geology interpretatons and geophysical data interpretations in east-central Minnesota, scale 1:48,000.

    View full record

  3. Title: Geologic map of the Penokean orogen, central and eastern Minnesota, and accompanying text, RI-37, Plate 1

    Contributors:

    Summary: Interpretations of bedrock geology (distribution of rock at the land surface and beneath surface sediments) of the Penokean Orogen, East-Central Minnesota, scale 1:250,000.

    View full record

  4. Title: Geologic atlas of Scott County, Minnesota, C-1, Plate 6, Hydrogeology

    Contributors:

    Summary: Maps showing water table configuration, transmissivity (ability of an aquifer to allow movement of water) and potentiometric conditions (potential direction of ground water movement) of surficial and bedrock aquifers, scale 1:200,000, Scott County.

    View full record

  5. Title: Geologic atlas of Scott County, Minnesota, C-1, Plate 2, Surficial Geologic map

    Contributors:

    Summary: Map showing interpretations of Quaternary (Pleistocene [glacial] and Holocene [post-glacial]) surficial geology (distribution and type of materials at the land surface), scale 1:100,000, Scott County.

    View full record

  6. Title: Geologic atlas of Scott County, Minnesota, C-1, Plate 3, Surficial Sections and Thickness

    Contributors:

    Summary: Maps showing cross sections of Quaternary geologic units and thickness of the Quaternary glacial materials, scale 1:100,000, Scott County.

    View full record

  7. Title: Geologic atlas of Scott County, Minnesota, C-1, Plate 5, Bedrock Geology

    Contributors:

    Summary: Map showing interpretations of bedrock geology (distribution of rock at the land surface and beneath surface sediments) with cross section diagrams, scale 1:100,000, Scott County.

    View full record

  8. Title: Geologic atlas of Scott County, Minnesota, C-1, Plate 1, Physiography and Data Base

    Contributors:

    Summary: Interpretation of land surface topography. Map showing locations of water wells, soil borings, outcrops and cuttings samples collected during water well drilling. Distribution and sources of primary information tthat guide the geologic interpretations used to make the geologic maps in the series, scale 1:100,000.

    View full record

  9. Title: Geologic atlas of Scott County, Minnesota, C-1, Plate 4, Bedrock Topography

    Contributors:

    Summary: Maps showing the topography of the bedrock surface, well construction characteristics, physiography (geographic forms) of the bedrock surface and susceptibility of bedrock aquifers to contamination, scale 1:100,000;, scale 1:200,000, Scott County.

    View full record

  10. Title: Backscatter A (8101): Drakes Bay and Vicinity, California, 2010

    Contributors:

    Summary: This layer is a georeferenced raster image containing acoustic-backscatter data for Drakes Bay and the surrounding vicinity in California. The map of the area was generated from data collected by California State University, Monterey Bay (CSUMB), and by Fugro Pelagos. Mapping was completed between 2007 and 2010, using a combination of 200-kHz and 400-kHz Reson 7125, and 244-kHz Reson 8101 multibeam echosounders, as well as 468-kHz SEA SWATHPlus interferometric system. These mapping missions combined to collect backscatter data (sheet 3) from about the 10-m isobath to beyond the 3-nautical-mile limit of Californiaís State Waters. Backscatter is a remote sensing activity by which electromagnetic energy is reflected back towards its source by terrain or particles. Within the acoustic-backscatter imagery, brighter tones indicate higher backscatter intensity, and darker tones indicate lower backscatter intensity. The intensity represents a complex interaction between the acoustic pulse and the seafloor, as well as characteristics within the shallow subsurface, providing a general indication of seafloor texture and composition. Backscatter intensity depends on the acoustic source level; the frequency used to image the seafloor; the grazing angle; the composition and character of the seafloor, including grain size, water content, bulk density, and seafloor roughness; and some biological cover. Harder and rougher bottom types such as rocky outcrops or coarse sediment typically return stronger intensities (high backscatter, lighter tones), whereas softer bottom types such as fine sediment return weaker intensities (low backscatter, darker tones). This layer is part of USGS Data Series 781. In 2007, the California Ocean Protection Council initiated the California Seafloor Mapping Program (CSMP) to create a comprehensive seafloor map of high-resolution bathymetry, marine benthic habitats and geology within the 3-nautical-mile limit of California's State Waters. CSMP has divided coastal California into 110 map blocks, each to be published individually as United States Geological Survey Open-File Reports (OFRs) or Scientific Investigations Maps (SIMs) at a scale of 1:24,000. Maps display seafloor morphology and character, identify potential marine benthic habitats and illustrate both the seafloor geology and shallow (to about 100 m) subsurface geology. Data layers for bathymetry, bathymetric contours, acoustic backscatter, seafloor character, potential benthic habitat and offshore geology were created for each map block, as well as regional-scale data layers for sediment thickness, depth to transition, transgressive contours, isopachs, predicted distributions of benthic macro-invertebrates and visual observations of benthic habitat from video cruises over the entire state. These data are intended for science researchers, students, policy makers, and the general public. This information is not intended for navigational purposes.The data can be used with geographic information systems (GIS) software to display geologic and oceanographic information. Dartnell, P. and Kvitek, R.G. (2014). Backscatter A (8101): Drakes Bay and Vicinity, California, 2010. California State Waters Map Series Data Catalog: U.S. Geological Survey Data Series 781. Available at: http://purl.stanford.edu/bh565zz1424. This layer is presented in the WGS84 coordinate system for web display purposes. Downloadable data are provided in native coordinate system or projection.

    View full record

  11. Title: Backscatter D: Offshore of Tomales Point, California, 2010

    Contributors:

    Summary: This layer is a georeferenced raster image containing acoustic-backscatter data for the offshore area of Tomales Point, California. The acoustic-backscatter map of the area was generated from data collected by California State University, Monterey Bay (CSUMB), Fugro Pelagos and by the U.S. Geological Survey (USGS). Mapping was completed between 2004 and 2010, using a combination of 200-kHz and 400-kHz Reson 7125, and 244-kHz Reson 8101 multibeam echosounders, as well as 234-kHz and 468-kHz SEA SWATHPlus phase-differencing sidescan sonars. These mapping missions combined to collect backscatter data from about the 10-m isobath to beyond the 3-nautical-mile limit of California's State Waters. Within the acoustic-backscatter imagery, brighter tones indicate higher backscatter intensity, and darker tones indicate lower backscatter intensity. The intensity represents a complex interaction between the acoustic pulse and the seafloor, as well as characteristics within the shallow subsurface, providing a general indication of seafloor texture and composition. Backscatter intensity depends on the acoustic source level; the frequency used to image the seafloor; the grazing angle; the composition and character of the seafloor, including grain size, water content, bulk density, and seafloor roughness; and some biological cover. Harder and rougher bottom types such as rocky outcrops or coarse sediment typically return stronger intensities (high backscatter, lighter tones), whereas softer bottom types such as fine sediment return weaker intensities (low backscatter, darker tones). A map that shows these data is published in Open-File Report 2015-1088, "California State Waters Map Series--Offshore of Tomales Point, California." This layer is part of USGS Data Series 781. In 2007, the California Ocean Protection Council initiated the California Seafloor Mapping Program (CSMP) to create a comprehensive seafloor map of high-resolution bathymetry, marine benthic habitats and geology within the 3-nautical-mile limit of California's State Waters. CSMP has divided coastal California into 110 map blocks, each to be published individually as United States Geological Survey Open-File Reports (OFRs) or Scientific Investigations Maps (SIMs) at a scale of 1:24,000. Maps display seafloor morphology and character, identify potential marine benthic habitats and illustrate both the seafloor geology and shallow (to about 100 m) subsurface geology. Data layers for bathymetry, bathymetric contours, acoustic backscatter, seafloor character, potential benthic habitat and offshore geology were created for each map block, as well as regional-scale data layers for sediment thickness, depth to transition, transgressive contours, isopachs, predicted distributions of benthic macro-invertebrates and visual observations of benthic habitat from video cruises over the entire state. This coverage can be used to to aid in assessments and mitigation of geologic hazards in the coastal region and to provide sufficient geologic information for land-use and land-management decisions both onshore and offshore. These data are intended for science researchers, students, policy makers, and the general public. This information is not intended for navigational purposes.The data can be used with geographic information systems (GIS) software to display geologic and oceanographic information. Dartnell, P., Erdey, M.D., Kvitek, R.G., and Bretz, C.K. (2014). Backscatter D: Offshore of Tomales Point, California, 2010. California State Waters Map Series Data Catalog: U.S. Geological Survey Data Series 781. Available at: http://purl.stanford.edu/bj819cr5980. None This layer is presented in the WGS84 coordinate system for web display purposes. Downloadable data are provided in native coordinate system or projection.

    View full record

  12. Title: Contours: Offshore of Refugio Beach, California, 2015

    Contributors:

    Summary: This line shapefile contains bathymetric contours at 10 and 50 meter intervals for the offshore area of Refugio Beach, California. A map that show these data are published in Scientific Investigations Map 3319, "California State Waters Map Series--Offshore of Refugio Beach, California." This layer is part of USGS Data Series 781. In 2007, the California Ocean Protection Council initiated the California Seafloor Mapping Program (CSMP) to create a comprehensive seafloor map of high-resolution bathymetry, marine benthic habitats and geology within the 3-nautical-mile limit of California's State Waters. CSMP has divided coastal California into 110 map blocks, each to be published individually as United States Geological Survey Open-File Reports (OFRs) or Scientific Investigations Maps (SIMs) at a scale of 1:24,000. Maps display seafloor morphology and character, identify potential marine benthic habitats and illustrate both the seafloor geology and shallow (to about 100 m) subsurface geology. Data layers for bathymetry, bathymetric contours, acoustic backscatter, seafloor character, potential benthic habitat and offshore geology were created for each map block, as well as regional-scale data layers for sediment thickness, depth to transition, transgressive contours, isopachs, predicted distributions of benthic macro-invertebrates and visual observations of benthic habitat from video cruises over the entire state. This coverage can be used to to aid in assessments and mitigation of geologic hazards in the coastal region and to provide sufficient geologic information for land-use and land-management decisions both onshore and offshore. These data are intended for science researchers, students, policy makers, and the general public. This information is not intended for navigational purposes.The data can be used with geographic information systems (GIS) software to display geologic and oceanographic information. Ritchie, A.C., Dartnell, P., Kvitek, R.G., Johnson, S.Y. (2015). Contours: Offshore of Refugio Beach, California, 2015. California State Waters Map Series Data Catalog: U.S. Geological Survey Data Series 781. Available at: http://purl.stanford.edu/cj457gj7638. This layer is presented in the WGS84 coordinate system for web display purposes. Downloadable data are provided in native coordinate system or projection.

    View full record

  13. Title: Bathymetry: Offshore of Tomales Point, California, 2010

    Contributors:

    Summary: This layer is a georeferenced raster image containing bathymetric data for the offshore area of Tomales Point, California. The bathymetric and shaded relief maps of the area were generated from data collected by California State University, Monterey Bay (CSUMB) , Fugro Pelagos and by the U.S. Geological Survey (USGS). Mapping was completed between 2004 and 2010, using a combination of 200-kHz and 400-kHz Reson 7125, and 244-kHz Reson 8101 multibeam echosounders, as well as 234-kHz and 468-kHz SEA SWATHPlus phase-differencing sidescan sonars. These mapping missions combined to collect bathymetry from about the 10-m isobath to beyond the 3-nautical-mile limit of California's State Waters. NOTE: the horizontal datum of the bathymetry data (NAD83) differs from the horizontal datum of other layers in this data series (WGS84). Some bathymetry grids within this map were projected horizontally from WGS84 to NAD83 using ESRI tools to be more consistent with the vertical reference of the North American Vertical Datum of 1988 (NAVD88). A map that shows these data is published in Open-File Report 2015-1088, "California State Waters Map Series--Offshore of Tomales Point, California." This layer is part of USGS Data Series 781. In 2007, the California Ocean Protection Council initiated the California Seafloor Mapping Program (CSMP) to create a comprehensive seafloor map of high-resolution bathymetry, marine benthic habitats and geology within the 3-nautical-mile limit of California's State Waters. CSMP has divided coastal California into 110 map blocks, each to be published individually as United States Geological Survey Open-File Reports (OFRs) or Scientific Investigations Maps (SIMs) at a scale of 1:24,000. Maps display seafloor morphology and character, identify potential marine benthic habitats and illustrate both the seafloor geology and shallow (to about 100 m) subsurface geology. Data layers for bathymetry, bathymetric contours, acoustic backscatter, seafloor character, potential benthic habitat and offshore geology were created for each map block, as well as regional-scale data layers for sediment thickness, depth to transition, transgressive contours, isopachs, predicted distributions of benthic macro-invertebrates and visual observations of benthic habitat from video cruises over the entire state. This coverage can be used to to aid in assessments and mitigation of geologic hazards in the coastal region and to provide sufficient geologic information for land-use and land-management decisions both onshore and offshore. These data are intended for science researchers, students, policy makers, and the general public. This information is not intended for navigational purposes. Dartnell, P., Kvitek, R.G., and Bretz, C.K. (2014). Bathymetry: Offshore of Tomales Point, California, 2010. California State Waters Map Series Data Catalog: U.S. Geological Survey Data Series 781. Available at: http://purl.stanford.edu/sp951ck0438. None This layer is presented in the WGS84 coordinate system for web display purposes. Downloadable data are provided in native coordinate system or projection.

    View full record

  14. Title: Backscatter C (Swath): Offshore of Tomales Point, California, 2010

    Contributors:

    Summary: This layer is a georeferenced raster image containing acoustic-backscatter data for the offshore area of Tomales Point, California. The acoustic-backscatter map of the area was generated from data collected by California State University, Monterey Bay (CSUMB), Fugro Pelagos and by the U.S. Geological Survey (USGS). Mapping was completed between 2004 and 2010, using a combination of 200-kHz and 400-kHz Reson 7125, and 244-kHz Reson 8101 multibeam echosounders, as well as 234-kHz and 468-kHz SEA SWATHPlus phase-differencing sidescan sonars. These mapping missions combined to collect backscatter data from about the 10-m isobath to beyond the 3-nautical-mile limit of California's State Waters. Within the acoustic-backscatter imagery, brighter tones indicate higher backscatter intensity, and darker tones indicate lower backscatter intensity. The intensity represents a complex interaction between the acoustic pulse and the seafloor, as well as characteristics within the shallow subsurface, providing a general indication of seafloor texture and composition. Backscatter intensity depends on the acoustic source level; the frequency used to image the seafloor; the grazing angle; the composition and character of the seafloor, including grain size, water content, bulk density, and seafloor roughness; and some biological cover. Harder and rougher bottom types such as rocky outcrops or coarse sediment typically return stronger intensities (high backscatter, lighter tones), whereas softer bottom types such as fine sediment return weaker intensities (low backscatter, darker tones). A map that shows these data is published in Open-File Report 2015-1088, "California State Waters Map Series--Offshore of Tomales Point, California." This layer is part of USGS Data Series 781. In 2007, the California Ocean Protection Council initiated the California Seafloor Mapping Program (CSMP) to create a comprehensive seafloor map of high-resolution bathymetry, marine benthic habitats and geology within the 3-nautical-mile limit of California's State Waters. CSMP has divided coastal California into 110 map blocks, each to be published individually as United States Geological Survey Open-File Reports (OFRs) or Scientific Investigations Maps (SIMs) at a scale of 1:24,000. Maps display seafloor morphology and character, identify potential marine benthic habitats and illustrate both the seafloor geology and shallow (to about 100 m) subsurface geology. Data layers for bathymetry, bathymetric contours, acoustic backscatter, seafloor character, potential benthic habitat and offshore geology were created for each map block, as well as regional-scale data layers for sediment thickness, depth to transition, transgressive contours, isopachs, predicted distributions of benthic macro-invertebrates and visual observations of benthic habitat from video cruises over the entire state. This coverage can be used to to aid in assessments and mitigation of geologic hazards in the coastal region and to provide sufficient geologic information for land-use and land-management decisions both onshore and offshore. These data are intended for science researchers, students, policy makers, and the general public. This information is not intended for navigational purposes.The data can be used with geographic information systems (GIS) software to display geologic and oceanographic information. Dartnell, P., Erdey, M.D., Kvitek, R.G., and Bretz, C.K. (2014). Backscatter C (Swath): Offshore of Tomales Point, California, 2010. California State Waters Map Series Data Catalog: U.S. Geological Survey Data Series 781. Available at: http://purl.stanford.edu/sn970qh2871. None This layer is presented in the WGS84 coordinate system for web display purposes. Downloadable data are provided in native coordinate system or projection.

    View full record

  15. Title: Contours (10m): Offshore of Tomales Point, California, 2010

    Contributors:

    Summary: This line shapefile contains bathymetric contours at 10 meter intervals for the offshore area of Tomales Point, California. This layer was generated from bathymetry data collected by Fugro Pelagos and California State University, Monterey Bay, Seafloor Mapping Lab (CSUMB) and by the U.S. Geological Survey. Mapping was completed between 2004 and 2010, using a combination of 200-kHz and 400-kHz Reson 7125, and 244-kHz Reson 8101 multibeam echosounders, as well as 234-kHz and 468-kHz SEA SWATHPlus phase-differencing sidescan sonars. These mapping missions combined to collect bathymetry from about the 10-m isobath to beyond the 3-nautical-mile limit of Californiaís State Waters. Bathymetric contours at 10-m intervals were generated from a modified 2-m bathymetric surface. The original surface was smoothed using the Focal Mean tool in ArcGIS and a circular neighborhood with a radius of 20 to 30 meters (depending on the area). The contours were generated from this smoothed surface using the ArcGIS Spatial Analyst Contour tool. The most continuous contour segments were preserved while smaller segments and isolated island polygons were excluded from the final output. The contours were then clipped to the boundary of the map area. A map that shows these data is published in Open-File Report 2015-1088, "California State Waters Map Series--Offshore of Tomales Point, California." This layer is part of USGS Data Series 781. In 2007, the California Ocean Protection Council initiated the California Seafloor Mapping Program (CSMP) to create a comprehensive seafloor map of high-resolution bathymetry, marine benthic habitats and geology within the 3-nautical-mile limit of California's State Waters. CSMP has divided coastal California into 110 map blocks, each to be published individually as United States Geological Survey Open-File Reports (OFRs) or Scientific Investigations Maps (SIMs) at a scale of 1:24,000. Maps display seafloor morphology and character, identify potential marine benthic habitats and illustrate both the seafloor geology and shallow (to about 100 m) subsurface geology. Data layers for bathymetry, bathymetric contours, acoustic backscatter, seafloor character, potential benthic habitat and offshore geology were created for each map block, as well as regional-scale data layers for sediment thickness, depth to transition, transgressive contours, isopachs, predicted distributions of benthic macro-invertebrates and visual observations of benthic habitat from video cruises over the entire state. Part of the marine habitat mapping data for the California North Central Coast Mapping Project (NCCMP), this coverage can be used to to aid in assessments and mitigation of geologic hazards in the coastal region and to provide sufficient geologic information for land-use and land-management decisions both onshore and offshore. These data are intended for science researchers, students, policy makers, and the general public. This information is not intended for navigational purposes.The data can be used with geographic information systems (GIS) software to display geologic and oceanographic information. Dartnell, P., Kvitek, R.G., and Bretz, C.K. (2014). Contours (10m): Offshore of Tomales Point, California, 2010. California State Waters Map Series Data Catalog: U.S. Geological Survey Data Series 781. Available at: http://purl.stanford.edu/rt793kd9427. This layer is presented in the WGS84 coordinate system for web display purposes. Downloadable data are provided in native coordinate system or projection.

    View full record

  16. Title: Backscatter A (8101): Offshore of Tomales Point, California, 2010

    Contributors:

    Summary: This layer is a georeferenced raster image containing acoustic-backscatter data for the offshore area of Tomales Point, California. The acoustic-backscatter map of the area was generated from data collected by California State University, Monterey Bay (CSUMB), Fugro Pelagos and by the U.S. Geological Survey (USGS). Mapping was completed between 2004 and 2010, using a combination of 200-kHz and 400-kHz Reson 7125, and 244-kHz Reson 8101 multibeam echosounders, as well as 234-kHz and 468-kHz SEA SWATHPlus phase-differencing sidescan sonars. These mapping missions combined to collect backscatter data from about the 10-m isobath to beyond the 3-nautical-mile limit of California's State Waters. Within the acoustic-backscatter imagery, brighter tones indicate higher backscatter intensity, and darker tones indicate lower backscatter intensity. The intensity represents a complex interaction between the acoustic pulse and the seafloor, as well as characteristics within the shallow subsurface, providing a general indication of seafloor texture and composition. Backscatter intensity depends on the acoustic source level; the frequency used to image the seafloor; the grazing angle; the composition and character of the seafloor, including grain size, water content, bulk density, and seafloor roughness; and some biological cover. Harder and rougher bottom types such as rocky outcrops or coarse sediment typically return stronger intensities (high backscatter, lighter tones), whereas softer bottom types such as fine sediment return weaker intensities (low backscatter, darker tones). A map that shows these data is published in Open-File Report 2015-1088, "California State Waters Map Series--Offshore of Tomales Point, California." This layer is part of USGS Data Series 781. In 2007, the California Ocean Protection Council initiated the California Seafloor Mapping Program (CSMP) to create a comprehensive seafloor map of high-resolution bathymetry, marine benthic habitats and geology within the 3-nautical-mile limit of California's State Waters. CSMP has divided coastal California into 110 map blocks, each to be published individually as United States Geological Survey Open-File Reports (OFRs) or Scientific Investigations Maps (SIMs) at a scale of 1:24,000. Maps display seafloor morphology and character, identify potential marine benthic habitats and illustrate both the seafloor geology and shallow (to about 100 m) subsurface geology. Data layers for bathymetry, bathymetric contours, acoustic backscatter, seafloor character, potential benthic habitat and offshore geology were created for each map block, as well as regional-scale data layers for sediment thickness, depth to transition, transgressive contours, isopachs, predicted distributions of benthic macro-invertebrates and visual observations of benthic habitat from video cruises over the entire state. This coverage can be used to to aid in assessments and mitigation of geologic hazards in the coastal region and to provide sufficient geologic information for land-use and land-management decisions both onshore and offshore. These data are intended for science researchers, students, policy makers, and the general public. This information is not intended for navigational purposes.The data can be used with geographic information systems (GIS) software to display geologic and oceanographic information. Dartnell, P., Erdey, M.D., Kvitek, R.G., and Bretz, C.K. (2014). Backscatter A (8101): Offshore of Tomales Point, California, 2010. California State Waters Map Series Data Catalog: U.S. Geological Survey Data Series 781. Available at: http://purl.stanford.edu/tb879rs4686. None This layer is presented in the WGS84 coordinate system for web display purposes. Downloadable data are provided in native coordinate system or projection.

    View full record

  17. Title: Bathymetry Hillshade: Offshore of Tomales Point, California, 2010

    Contributors:

    Summary: This layer is a georeferenced raster image containing shaded relief (hillshade) data for the offshore area of Tomales Point, California. The bathymetric and shaded relief maps of the area were generated from data collected by California State University, Monterey Bay (CSUMB), Fugro Pelagos and by the U.S. Geological Survey (USGS). Mapping was completed between 2004 and 2010, using a combination of 200-kHz and 400-kHz Reson 7125, and 244-kHz Reson 8101 multibeam echosounders, as well as 234-kHz and 468-kHz SEA SWATHPlus phase-differencing sidescan sonars. These mapping missions combined to collect bathymetry from about the 10-m isobath to beyond the 3-nautical-mile limit of California's State Waters. A map that shows these data is published in Open-File Report 2015-1088, "California State Waters Map Series--Offshore of Tomales Point, California." This layer is part of USGS Data Series 781. In 2007, the California Ocean Protection Council initiated the California Seafloor Mapping Program (CSMP) to create a comprehensive seafloor map of high-resolution bathymetry, marine benthic habitats and geology within the 3-nautical-mile limit of California's State Waters. CSMP has divided coastal California into 110 map blocks, each to be published individually as United States Geological Survey Open-File Reports (OFRs) or Scientific Investigations Maps (SIMs) at a scale of 1:24,000. Maps display seafloor morphology and character, identify potential marine benthic habitats and illustrate both the seafloor geology and shallow (to about 100 m) subsurface geology. Data layers for bathymetry, bathymetric contours, acoustic backscatter, seafloor character, potential benthic habitat and offshore geology were created for each map block, as well as regional-scale data layers for sediment thickness, depth to transition, transgressive contours, isopachs, predicted distributions of benthic macro-invertebrates and visual observations of benthic habitat from video cruises over the entire state. This coverage can be used to to aid in assessments and mitigation of geologic hazards in the coastal region and to provide sufficient geologic information for land-use and land-management decisions both onshore and offshore. These data are intended for science researchers, students, policy makers, and the general public. This information is not intended for navigational purposes. Dartnell, P., Kvitek, R.G., and Bretz, C.K. (2014). Bathymetry Hillshade: Offshore of Tomales Point, California, 2010. California State Waters Map Series Data Catalog: U.S. Geological Survey Data Series 781. Available at: http://purl.stanford.edu/jv946qh2134. None This layer is presented in the WGS84 coordinate system for web display purposes. Downloadable data are provided in native coordinate system or projection.

    View full record

  18. Title: Backscatter B (7125): Offshore of Tomales Point, California, 2010

    Contributors:

    Summary: This layer is a georeferenced raster image containing acoustic-backscatter data for the offshore area of Tomales Point, California. The acoustic-backscatter map of the area was generated from data collected by California State University, Monterey Bay (CSUMB), Fugro Pelagos and by the U.S. Geological Survey (USGS). Mapping was completed between 2004 and 2010, using a combination of 200-kHz and 400-kHz Reson 7125, and 244-kHz Reson 8101 multibeam echosounders, as well as 234-kHz and 468-kHz SEA SWATHPlus phase-differencing sidescan sonars. These mapping missions combined to collect backscatter data from about the 10-m isobath to beyond the 3-nautical-mile limit of California's State Waters. Within the acoustic-backscatter imagery, brighter tones indicate higher backscatter intensity, and darker tones indicate lower backscatter intensity. The intensity represents a complex interaction between the acoustic pulse and the seafloor, as well as characteristics within the shallow subsurface, providing a general indication of seafloor texture and composition. Backscatter intensity depends on the acoustic source level; the frequency used to image the seafloor; the grazing angle; the composition and character of the seafloor, including grain size, water content, bulk density, and seafloor roughness; and some biological cover. Harder and rougher bottom types such as rocky outcrops or coarse sediment typically return stronger intensities (high backscatter, lighter tones), whereas softer bottom types such as fine sediment return weaker intensities (low backscatter, darker tones). A map that shows these data is published in Open-File Report 2015-1088, "California State Waters Map Series--Offshore of Tomales Point, California." This layer is part of USGS Data Series 781. In 2007, the California Ocean Protection Council initiated the California Seafloor Mapping Program (CSMP) to create a comprehensive seafloor map of high-resolution bathymetry, marine benthic habitats and geology within the 3-nautical-mile limit of California's State Waters. CSMP has divided coastal California into 110 map blocks, each to be published individually as United States Geological Survey Open-File Reports (OFRs) or Scientific Investigations Maps (SIMs) at a scale of 1:24,000. Maps display seafloor morphology and character, identify potential marine benthic habitats and illustrate both the seafloor geology and shallow (to about 100 m) subsurface geology. Data layers for bathymetry, bathymetric contours, acoustic backscatter, seafloor character, potential benthic habitat and offshore geology were created for each map block, as well as regional-scale data layers for sediment thickness, depth to transition, transgressive contours, isopachs, predicted distributions of benthic macro-invertebrates and visual observations of benthic habitat from video cruises over the entire state. This coverage can be used to to aid in assessments and mitigation of geologic hazards in the coastal region and to provide sufficient geologic information for land-use and land-management decisions both onshore and offshore. These data are intended for science researchers, students, policy makers, and the general public. This information is not intended for navigational purposes.The data can be used with geographic information systems (GIS) software to display geologic and oceanographic information. Dartnell, P., Erdey, M.D., Kvitek, R.G., and Bretz, C.K. (2014). Backscatter B (7125): Offshore of Tomales Point, California, 2010. California State Waters Map Series Data Catalog: U.S. Geological Survey Data Series 781. Available at: http://purl.stanford.edu/sb976wc2810. None This layer is presented in the WGS84 coordinate system for web display purposes. Downloadable data are provided in native coordinate system or projection.

    View full record

  19. Title: Gdansk, Poland, 1687 (Raster Image)

    Contributors:

    Summary: This layer is a georeferenced raster image of the historic paper map entitled: Dantzig in plano : anno 1687, Peter Willer, archit. civ. del. It was published in 1687. Scale [ca.1:8,382]. Covers Gdansk, Poland. Map in Latin and German.The image inside the map neatline is georeferenced to the surface of the earth and fit to the 'Pulkovo 1942 Adjust 1958 Poland Zone III' coordinate system. All map collar and inset information is also available as part of the raster image, including any inset maps, profiles, statistical tables, directories, text, illustrations, index maps, legends, or other information associated with the principal map.This map shows features such as roads, drainage, built-up areas and selected buildings, fortification, ground cover, and more. Relief shown pictorially. Includes index and view of Gdansk.This layer is part of a selection of digitally scanned and georeferenced historic maps from The Harvard Map Collection as part of the Imaging the Urban Environment project. Maps selected for this project represent major urban areas and cities of the world, at various time periods. These maps typically portray both natural and manmade features at a large scale. The selection represents a range of regions, originators, ground condition dates, scales, and purposes.

    View full record

  20. Title: Backscatter A (8101): Offshore of Salt Point Map Area, California, 2010

    Contributors:

    Summary: This layer is a georeferenced raster image containing acoustic-backscatter data for the offshore area of Salt Point, California. The acoustic-backscatter map of the area was generated from data collected by California State University, Monterey Bay (CSUMB), and by Fugro Pelagos. Mapping was completed between 2007 and 2010, using a combination of 200-kHz and 400-kHz Reson 7125, and 244-kHz Reson 8101 multibeam echosounders, as well as 468-kHz SEA SWATHPlus interferometric system. These mapping missions combined to collect backscatter data from about the 10-m isobath to beyond the 3-nautical-mile limit of California State Waters. Within the acoustic-backscatter imagery, brighter tones indicate higher backscatter intensity, and darker tones indicate lower backscatter intensity. The intensity represents a complex interaction between the acoustic pulse and the seafloor, as well as characteristics within the shallow subsurface, providing a general indication of seafloor texture and composition. Backscatter intensity depends on the acoustic source level; the frequency used to image the seafloor; the grazing angle; the composition and character of the seafloor, including grain size, water content, bulk density, and seafloor roughness; and some biological cover. Harder and rougher bottom types such as rocky outcrops or coarse sediment typically return stronger intensities (high backscatter, lighter tones), whereas softer bottom types such as fine sediment return weaker intensities (low backscatter, darker tones). A map that shows these data is published in Open-File Report 2015–1098, "California State Waters Map Series- Offshore of Salt Point, California." This layer is a part of USGS DS 781. In 2007, the California Ocean Protection Council initiated the California Seafloor Mapping Program (CSMP) to create a comprehensive seafloor map of high-resolution bathymetry, marine benthic habitats and geology within the 3-nautical-mile limit of California's State Waters. CSMP has divided coastal California into 110 map blocks, each to be published individually as United States Geological Survey Open-File Reports (OFRs) or Scientific Investigations Maps (SIMs) at a scale of 1:24,000. Maps display seafloor morphology and character, identify potential marine benthic habitats and illustrate both the seafloor geology and shallow (to about 100 m) subsurface geology. Data layers for bathymetry, bathymetric contours, acoustic backscatter, seafloor character, potential benthic habitat and offshore geology were created for each map block, as well as regional-scale data layers for sediment thickness, depth to transition, transgressive contours, isopachs, predicted distributions of benthic macro-invertebrates and visual observations of benthic habitat from video cruises over the entire state. This coverage can be used to to aid in assessments and mitigation of geologic hazards in the coastal region and to provide sufficient geologic information for land-use and land-management decisions both onshore and offshore. These data are intended for science researchers, students, policy makers, and the general public. This information is not intended for navigational purposes.The data can be used with geographic information systems (GIS) software to display geologic and oceanographic information. Dartnell, P. and Kvitek, R.G. (2014). Backscatter A (8101): Offshore of Salt Point Map Area, California, 2010. California State Waters Map Series Data Catalog: U.S. Geological Survey Data Series 781. Available at: http://purl.stanford.edu/pq280xb0575. None This layer is presented in the WGS84 coordinate system for web display purposes. Downloadable data are provided in native coordinate system or projection.

    View full record

Need help?

Ask GIS