Search for geospatial/GIS data

Find GIS data held at MIT and other institutions

6,783 results returned

  1. Title: Bathymetry Hillshade: Offshore of Refugio Beach, California, 2015

    Contributors:

    Summary: This layer is a georeferenced raster image containing shaded relief (hillshade) data for the offshore area of Refugio Beach, California. The bathymetry and shaded-relief maps the area were generated from bathymetry data collected by the U.S. Geological Survey (USGS), and by Fugro Pelagos, for the U.S. Army Corps of Engineers (USACE) Joint Lidar Bathymetry Technical Center of Expertise. The offshore region was mapped by the USGS in 2008, using a 234.5-kHz SEA (AP) Ltd. SWATHplus-M phase-differencing sidescan sonar. The nearshore bathymetry and coastal topography were mapped for USACE by Fugro Pelagos in 2009, using the SHOALS-1000T bathymetric-lidar and Leica ALS60 topographic-lidar systems. All these mapping missions combined to collect bathymetry from the 0-m isobath to beyond the 3-nautical-mile limit of California's State Waters. A map that show these data are published in Scientific Investigations Map 3319, "California State Waters Map Series--Offshore of Refugio Beach, California." This layer is part of USGS Data Series 781. In 2007, the California Ocean Protection Council initiated the California Seafloor Mapping Program (CSMP) to create a comprehensive seafloor map of high-resolution bathymetry, marine benthic habitats and geology within the 3-nautical-mile limit of California's State Waters. CSMP has divided coastal California into 110 map blocks, each to be published individually as United States Geological Survey Open-File Reports (OFRs) or Scientific Investigations Maps (SIMs) at a scale of 1:24,000. Maps display seafloor morphology and character, identify potential marine benthic habitats and illustrate both the seafloor geology and shallow (to about 100 m) subsurface geology. Data layers for bathymetry, bathymetric contours, acoustic backscatter, seafloor character, potential benthic habitat and offshore geology were created for each map block, as well as regional-scale data layers for sediment thickness, depth to transition, transgressive contours, isopachs, predicted distributions of benthic macro-invertebrates and visual observations of benthic habitat from video cruises over the entire state. This coverage can be used to to aid in assessments and mitigation of geologic hazards in the coastal region and to provide sufficient geologic information for land-use and land-management decisions both onshore and offshore. These data are intended for science researchers, students, policy makers, and the general public. This information is not intended for navigational purposes. Dartnell, P., Phillips, E.L., Finlayson, D.P. (2015). Bathymetry Hillshade: Offshore of Refugio Beach, California, 2015. California State Waters Map Series Data Catalog: U.S. Geological Survey Data Series 781. Available at: http://purl.stanford.edu/sd434vw6164. Information for the related USGS Pacific Coastal and Marine Science Center data collection field activity, S-8-08-SC online at http://walrus.wr.usgs.gov/infobank/s/s808sc/html/s-8-08-sc.meta.html. This layer is presented in the WGS84 coordinate system for web display purposes. Downloadable data are provided in native coordinate system or projection.

    View full record

  2. Title: Folds: Offshore of Refugio Beach, California, 2012

    Contributors:

    Summary: This line shapefile contains geologic folds for the offshore area of Refugio Beach, California. This map area lies within the Western Transverse Ranges province, north of the southern California Borderland (Fisher and others, 2009). This province has undergone significant north-south compression since the Miocene, and recent global positioning system (GPS) data suggest north-south shortening of about 6 mm/yr (Larson and Webb, 1992). The active west-trending Pitas Point Fault (broad zone including back faults), Red Mountain Fault, and Rincon Creek Fault are some of the structures on which this shortening occurs (e.g., Jackson and Yeats, 1982; Sorlien and others, 2000; Fisher and others, 2009). This fault system, in aggregate, extends for about 100 km through the Ventura and Santa Barbara basins and represents an important earthquake hazard (e.g., Fisher and others, 2009). A map that show these data are published in Scientific Investigations Map 3319, "California State Waters Map Series--Offshore of Refugio Beach, California." This layer is part of USGS Data Series 781. In 2007, the California Ocean Protection Council initiated the California Seafloor Mapping Program (CSMP) to create a comprehensive seafloor map of high-resolution bathymetry, marine benthic habitats and geology within the 3-nautical-mile limit of California's State Waters. CSMP has divided coastal California into 110 map blocks, each to be published individually as United States Geological Survey Open-File Reports (OFRs) or Scientific Investigations Maps (SIMs) at a scale of 1:24,000. Maps display seafloor morphology and character, identify potential marine benthic habitats and illustrate both the seafloor geology and shallow (to about 100 m) subsurface geology. Data layers for bathymetry, bathymetric contours, acoustic backscatter, seafloor character, potential benthic habitat and offshore geology were created for each map block, as well as regional-scale data layers for sediment thickness, depth to transition, transgressive contours, isopachs, predicted distributions of benthic macro-invertebrates and visual observations of benthic habitat from video cruises over the entire state. This coverage can be used to to aid in assessments and mitigation of geologic hazards in the coastal region and to provide sufficient geologic information for land-use and land-management decisions both onshore and offshore. These data are intended for science researchers, students, policy makers, and the general public. This information is not intended for navigational purposes.The data can be used with geographic information systems (GIS) software to display geologic and oceanographic information. Conrad, J.E., Ritchie, A.C., Johnson, S.Y. (2015). Folds: Offshore of Refugio Beach, California, 2012. California State Waters Map Series Data Catalog: U.S. Geological Survey Data Series 781. Available at: http://purl.stanford.edu/tp111fr3266. Map political location: Santa Barbara County, California Compilation scale: 1:24,000 Base maps used are hillshades generated from IfSAR, LiDAR, and multibeam mapping both onshore and offshore (see sheet 2, SIM 3319 for more information). References Cited: Fisher, M.A., Sorlien, C.C., and Sliter, R.W., 2009, Potential earthquake faults offshore southern California from the eastern Santa Barbara channel to Dana Point, in Lee, H.J., and Normark, W.R., eds., 2009, Earth science in the urban ocean: The Southern California Continental Borderland: Geological Society of America Special Paper 454, p. 271-290. Jackson, P.A., and Yeats, R.S., 1982, Sructural evolution of Carpinteria basin, western Tranverse Ranges, California: American Association of Petroleum Geologists Bulletin, v. 66, p. 805-829. Larson, K.M., and Webb, F.H., 1992, Deformation in the Santa Barbara Channel from GPS measurements 1987-1991: Geophysical News Letters, v. 19, p. 1491-1494. Sorlien, C.C., Gratier, J.P., Luyendyk, B.P., Hornafius, J.S., and Hopps, T.E., 2000, Map restoration of folded and faulted late Cenozoic strata across the Oak Ridge fault, onshore and offshore Ventura basin, California: Geological Society of America Bulletin, v. 112, p. 1080-1090. This layer is presented in the WGS84 coordinate system for web display purposes. Downloadable data are provided in native coordinate system or projection.

    View full record

  3. Title: Backscatter A (8101): Drakes Bay and Vicinity, California, 2010

    Contributors:

    Summary: This layer is a georeferenced raster image containing acoustic-backscatter data for Drakes Bay and the surrounding vicinity in California. The map of the area was generated from data collected by California State University, Monterey Bay (CSUMB), and by Fugro Pelagos. Mapping was completed between 2007 and 2010, using a combination of 200-kHz and 400-kHz Reson 7125, and 244-kHz Reson 8101 multibeam echosounders, as well as 468-kHz SEA SWATHPlus interferometric system. These mapping missions combined to collect backscatter data (sheet 3) from about the 10-m isobath to beyond the 3-nautical-mile limit of Californiaís State Waters. Backscatter is a remote sensing activity by which electromagnetic energy is reflected back towards its source by terrain or particles. Within the acoustic-backscatter imagery, brighter tones indicate higher backscatter intensity, and darker tones indicate lower backscatter intensity. The intensity represents a complex interaction between the acoustic pulse and the seafloor, as well as characteristics within the shallow subsurface, providing a general indication of seafloor texture and composition. Backscatter intensity depends on the acoustic source level; the frequency used to image the seafloor; the grazing angle; the composition and character of the seafloor, including grain size, water content, bulk density, and seafloor roughness; and some biological cover. Harder and rougher bottom types such as rocky outcrops or coarse sediment typically return stronger intensities (high backscatter, lighter tones), whereas softer bottom types such as fine sediment return weaker intensities (low backscatter, darker tones). This layer is part of USGS Data Series 781. In 2007, the California Ocean Protection Council initiated the California Seafloor Mapping Program (CSMP) to create a comprehensive seafloor map of high-resolution bathymetry, marine benthic habitats and geology within the 3-nautical-mile limit of California's State Waters. CSMP has divided coastal California into 110 map blocks, each to be published individually as United States Geological Survey Open-File Reports (OFRs) or Scientific Investigations Maps (SIMs) at a scale of 1:24,000. Maps display seafloor morphology and character, identify potential marine benthic habitats and illustrate both the seafloor geology and shallow (to about 100 m) subsurface geology. Data layers for bathymetry, bathymetric contours, acoustic backscatter, seafloor character, potential benthic habitat and offshore geology were created for each map block, as well as regional-scale data layers for sediment thickness, depth to transition, transgressive contours, isopachs, predicted distributions of benthic macro-invertebrates and visual observations of benthic habitat from video cruises over the entire state. These data are intended for science researchers, students, policy makers, and the general public. This information is not intended for navigational purposes.The data can be used with geographic information systems (GIS) software to display geologic and oceanographic information. Dartnell, P. and Kvitek, R.G. (2014). Backscatter A (8101): Drakes Bay and Vicinity, California, 2010. California State Waters Map Series Data Catalog: U.S. Geological Survey Data Series 781. Available at: http://purl.stanford.edu/bh565zz1424. This layer is presented in the WGS84 coordinate system for web display purposes. Downloadable data are provided in native coordinate system or projection.

    View full record

  4. Title: Seafloor Character: Offshore of Tomales Point, California, 2010

    Contributors:

    Summary: This layer is a georeferenced raster image containing seafloor character data for the offshore area of Tomales Point, California. A map that shows these data is published in Open-File Report 2015-1088, "California State Waters Map Series--Offshore of Tomales Point, California." This layer is part of USGS Data Series 781. In 2007, the California Ocean Protection Council initiated the California Seafloor Mapping Program (CSMP) to create a comprehensive seafloor map of high-resolution bathymetry, marine benthic habitats and geology within the 3-nautical-mile limit of California's State Waters. CSMP has divided coastal California into 110 map blocks, each to be published individually as United States Geological Survey Open-File Reports (OFRs) or Scientific Investigations Maps (SIMs) at a scale of 1:24,000. Maps display seafloor morphology and character, identify potential marine benthic habitats and illustrate both the seafloor geology and shallow (to about 100 m) subsurface geology. Data layers for bathymetry, bathymetric contours, acoustic backscatter, seafloor character, potential benthic habitat and offshore geology were created for each map block, as well as regional-scale data layers for sediment thickness, depth to transition, transgressive contours, isopachs, predicted distributions of benthic macro-invertebrates and visual observations of benthic habitat from video cruises over the entire state. These data are intended for science researchers, students, policy makers, and the general public. This information is not intended for navigational purposes.The data can be used with geographic information systems (GIS) software to display geologic and oceanographic information. Additionally, this coverage can provide a geologic map for the public and geoscience community to aid in assessments and mitigation of geologic hazards in the coastal region and sufficient geologic information for land-use and land-management decisions both onshore and offshore. This information is not intended for navigational purposes. Erdey, M.D. and Cochrane, G.R. (2014). Seafloor Character: Offshore of Tomales Point, California, 2010. California State Waters Map Series Data Catalog: U.S. Geological Survey Data Series 781. Available at: http://purl.stanford.edu/bj788gx9955. Information for USGS Coastal and Marine Geology related activities are online at <http://walrus.wr.usgs.gov/infobank/l/l908nc/html/l-9-08-nc.meta.html> This layer is presented in the WGS84 coordinate system for web display purposes. Downloadable data are provided in native coordinate system or projection.

    View full record

  5. Title: Backscatter D: Offshore of Tomales Point, California, 2010

    Contributors:

    Summary: This layer is a georeferenced raster image containing acoustic-backscatter data for the offshore area of Tomales Point, California. The acoustic-backscatter map of the area was generated from data collected by California State University, Monterey Bay (CSUMB), Fugro Pelagos and by the U.S. Geological Survey (USGS). Mapping was completed between 2004 and 2010, using a combination of 200-kHz and 400-kHz Reson 7125, and 244-kHz Reson 8101 multibeam echosounders, as well as 234-kHz and 468-kHz SEA SWATHPlus phase-differencing sidescan sonars. These mapping missions combined to collect backscatter data from about the 10-m isobath to beyond the 3-nautical-mile limit of California's State Waters. Within the acoustic-backscatter imagery, brighter tones indicate higher backscatter intensity, and darker tones indicate lower backscatter intensity. The intensity represents a complex interaction between the acoustic pulse and the seafloor, as well as characteristics within the shallow subsurface, providing a general indication of seafloor texture and composition. Backscatter intensity depends on the acoustic source level; the frequency used to image the seafloor; the grazing angle; the composition and character of the seafloor, including grain size, water content, bulk density, and seafloor roughness; and some biological cover. Harder and rougher bottom types such as rocky outcrops or coarse sediment typically return stronger intensities (high backscatter, lighter tones), whereas softer bottom types such as fine sediment return weaker intensities (low backscatter, darker tones). A map that shows these data is published in Open-File Report 2015-1088, "California State Waters Map Series--Offshore of Tomales Point, California." This layer is part of USGS Data Series 781. In 2007, the California Ocean Protection Council initiated the California Seafloor Mapping Program (CSMP) to create a comprehensive seafloor map of high-resolution bathymetry, marine benthic habitats and geology within the 3-nautical-mile limit of California's State Waters. CSMP has divided coastal California into 110 map blocks, each to be published individually as United States Geological Survey Open-File Reports (OFRs) or Scientific Investigations Maps (SIMs) at a scale of 1:24,000. Maps display seafloor morphology and character, identify potential marine benthic habitats and illustrate both the seafloor geology and shallow (to about 100 m) subsurface geology. Data layers for bathymetry, bathymetric contours, acoustic backscatter, seafloor character, potential benthic habitat and offshore geology were created for each map block, as well as regional-scale data layers for sediment thickness, depth to transition, transgressive contours, isopachs, predicted distributions of benthic macro-invertebrates and visual observations of benthic habitat from video cruises over the entire state. This coverage can be used to to aid in assessments and mitigation of geologic hazards in the coastal region and to provide sufficient geologic information for land-use and land-management decisions both onshore and offshore. These data are intended for science researchers, students, policy makers, and the general public. This information is not intended for navigational purposes.The data can be used with geographic information systems (GIS) software to display geologic and oceanographic information. Dartnell, P., Erdey, M.D., Kvitek, R.G., and Bretz, C.K. (2014). Backscatter D: Offshore of Tomales Point, California, 2010. California State Waters Map Series Data Catalog: U.S. Geological Survey Data Series 781. Available at: http://purl.stanford.edu/bj819cr5980. None This layer is presented in the WGS84 coordinate system for web display purposes. Downloadable data are provided in native coordinate system or projection.

    View full record

  6. Title: Contours: Offshore of Refugio Beach, California, 2015

    Contributors:

    Summary: This line shapefile contains bathymetric contours at 10 and 50 meter intervals for the offshore area of Refugio Beach, California. A map that show these data are published in Scientific Investigations Map 3319, "California State Waters Map Series--Offshore of Refugio Beach, California." This layer is part of USGS Data Series 781. In 2007, the California Ocean Protection Council initiated the California Seafloor Mapping Program (CSMP) to create a comprehensive seafloor map of high-resolution bathymetry, marine benthic habitats and geology within the 3-nautical-mile limit of California's State Waters. CSMP has divided coastal California into 110 map blocks, each to be published individually as United States Geological Survey Open-File Reports (OFRs) or Scientific Investigations Maps (SIMs) at a scale of 1:24,000. Maps display seafloor morphology and character, identify potential marine benthic habitats and illustrate both the seafloor geology and shallow (to about 100 m) subsurface geology. Data layers for bathymetry, bathymetric contours, acoustic backscatter, seafloor character, potential benthic habitat and offshore geology were created for each map block, as well as regional-scale data layers for sediment thickness, depth to transition, transgressive contours, isopachs, predicted distributions of benthic macro-invertebrates and visual observations of benthic habitat from video cruises over the entire state. This coverage can be used to to aid in assessments and mitigation of geologic hazards in the coastal region and to provide sufficient geologic information for land-use and land-management decisions both onshore and offshore. These data are intended for science researchers, students, policy makers, and the general public. This information is not intended for navigational purposes.The data can be used with geographic information systems (GIS) software to display geologic and oceanographic information. Ritchie, A.C., Dartnell, P., Kvitek, R.G., Johnson, S.Y. (2015). Contours: Offshore of Refugio Beach, California, 2015. California State Waters Map Series Data Catalog: U.S. Geological Survey Data Series 781. Available at: http://purl.stanford.edu/cj457gj7638. This layer is presented in the WGS84 coordinate system for web display purposes. Downloadable data are provided in native coordinate system or projection.

    View full record

  7. Title: Bathymetry: Offshore of Tomales Point, California, 2010

    Contributors:

    Summary: This layer is a georeferenced raster image containing bathymetric data for the offshore area of Tomales Point, California. The bathymetric and shaded relief maps of the area were generated from data collected by California State University, Monterey Bay (CSUMB) , Fugro Pelagos and by the U.S. Geological Survey (USGS). Mapping was completed between 2004 and 2010, using a combination of 200-kHz and 400-kHz Reson 7125, and 244-kHz Reson 8101 multibeam echosounders, as well as 234-kHz and 468-kHz SEA SWATHPlus phase-differencing sidescan sonars. These mapping missions combined to collect bathymetry from about the 10-m isobath to beyond the 3-nautical-mile limit of California's State Waters. NOTE: the horizontal datum of the bathymetry data (NAD83) differs from the horizontal datum of other layers in this data series (WGS84). Some bathymetry grids within this map were projected horizontally from WGS84 to NAD83 using ESRI tools to be more consistent with the vertical reference of the North American Vertical Datum of 1988 (NAVD88). A map that shows these data is published in Open-File Report 2015-1088, "California State Waters Map Series--Offshore of Tomales Point, California." This layer is part of USGS Data Series 781. In 2007, the California Ocean Protection Council initiated the California Seafloor Mapping Program (CSMP) to create a comprehensive seafloor map of high-resolution bathymetry, marine benthic habitats and geology within the 3-nautical-mile limit of California's State Waters. CSMP has divided coastal California into 110 map blocks, each to be published individually as United States Geological Survey Open-File Reports (OFRs) or Scientific Investigations Maps (SIMs) at a scale of 1:24,000. Maps display seafloor morphology and character, identify potential marine benthic habitats and illustrate both the seafloor geology and shallow (to about 100 m) subsurface geology. Data layers for bathymetry, bathymetric contours, acoustic backscatter, seafloor character, potential benthic habitat and offshore geology were created for each map block, as well as regional-scale data layers for sediment thickness, depth to transition, transgressive contours, isopachs, predicted distributions of benthic macro-invertebrates and visual observations of benthic habitat from video cruises over the entire state. This coverage can be used to to aid in assessments and mitigation of geologic hazards in the coastal region and to provide sufficient geologic information for land-use and land-management decisions both onshore and offshore. These data are intended for science researchers, students, policy makers, and the general public. This information is not intended for navigational purposes. Dartnell, P., Kvitek, R.G., and Bretz, C.K. (2014). Bathymetry: Offshore of Tomales Point, California, 2010. California State Waters Map Series Data Catalog: U.S. Geological Survey Data Series 781. Available at: http://purl.stanford.edu/sp951ck0438. None This layer is presented in the WGS84 coordinate system for web display purposes. Downloadable data are provided in native coordinate system or projection.

    View full record

  8. Title: Backscatter C (Swath): Offshore of Tomales Point, California, 2010

    Contributors:

    Summary: This layer is a georeferenced raster image containing acoustic-backscatter data for the offshore area of Tomales Point, California. The acoustic-backscatter map of the area was generated from data collected by California State University, Monterey Bay (CSUMB), Fugro Pelagos and by the U.S. Geological Survey (USGS). Mapping was completed between 2004 and 2010, using a combination of 200-kHz and 400-kHz Reson 7125, and 244-kHz Reson 8101 multibeam echosounders, as well as 234-kHz and 468-kHz SEA SWATHPlus phase-differencing sidescan sonars. These mapping missions combined to collect backscatter data from about the 10-m isobath to beyond the 3-nautical-mile limit of California's State Waters. Within the acoustic-backscatter imagery, brighter tones indicate higher backscatter intensity, and darker tones indicate lower backscatter intensity. The intensity represents a complex interaction between the acoustic pulse and the seafloor, as well as characteristics within the shallow subsurface, providing a general indication of seafloor texture and composition. Backscatter intensity depends on the acoustic source level; the frequency used to image the seafloor; the grazing angle; the composition and character of the seafloor, including grain size, water content, bulk density, and seafloor roughness; and some biological cover. Harder and rougher bottom types such as rocky outcrops or coarse sediment typically return stronger intensities (high backscatter, lighter tones), whereas softer bottom types such as fine sediment return weaker intensities (low backscatter, darker tones). A map that shows these data is published in Open-File Report 2015-1088, "California State Waters Map Series--Offshore of Tomales Point, California." This layer is part of USGS Data Series 781. In 2007, the California Ocean Protection Council initiated the California Seafloor Mapping Program (CSMP) to create a comprehensive seafloor map of high-resolution bathymetry, marine benthic habitats and geology within the 3-nautical-mile limit of California's State Waters. CSMP has divided coastal California into 110 map blocks, each to be published individually as United States Geological Survey Open-File Reports (OFRs) or Scientific Investigations Maps (SIMs) at a scale of 1:24,000. Maps display seafloor morphology and character, identify potential marine benthic habitats and illustrate both the seafloor geology and shallow (to about 100 m) subsurface geology. Data layers for bathymetry, bathymetric contours, acoustic backscatter, seafloor character, potential benthic habitat and offshore geology were created for each map block, as well as regional-scale data layers for sediment thickness, depth to transition, transgressive contours, isopachs, predicted distributions of benthic macro-invertebrates and visual observations of benthic habitat from video cruises over the entire state. This coverage can be used to to aid in assessments and mitigation of geologic hazards in the coastal region and to provide sufficient geologic information for land-use and land-management decisions both onshore and offshore. These data are intended for science researchers, students, policy makers, and the general public. This information is not intended for navigational purposes.The data can be used with geographic information systems (GIS) software to display geologic and oceanographic information. Dartnell, P., Erdey, M.D., Kvitek, R.G., and Bretz, C.K. (2014). Backscatter C (Swath): Offshore of Tomales Point, California, 2010. California State Waters Map Series Data Catalog: U.S. Geological Survey Data Series 781. Available at: http://purl.stanford.edu/sn970qh2871. None This layer is presented in the WGS84 coordinate system for web display purposes. Downloadable data are provided in native coordinate system or projection.

    View full record

  9. Title: Contours (10m): Offshore of Tomales Point, California, 2010

    Contributors:

    Summary: This line shapefile contains bathymetric contours at 10 meter intervals for the offshore area of Tomales Point, California. This layer was generated from bathymetry data collected by Fugro Pelagos and California State University, Monterey Bay, Seafloor Mapping Lab (CSUMB) and by the U.S. Geological Survey. Mapping was completed between 2004 and 2010, using a combination of 200-kHz and 400-kHz Reson 7125, and 244-kHz Reson 8101 multibeam echosounders, as well as 234-kHz and 468-kHz SEA SWATHPlus phase-differencing sidescan sonars. These mapping missions combined to collect bathymetry from about the 10-m isobath to beyond the 3-nautical-mile limit of Californiaís State Waters. Bathymetric contours at 10-m intervals were generated from a modified 2-m bathymetric surface. The original surface was smoothed using the Focal Mean tool in ArcGIS and a circular neighborhood with a radius of 20 to 30 meters (depending on the area). The contours were generated from this smoothed surface using the ArcGIS Spatial Analyst Contour tool. The most continuous contour segments were preserved while smaller segments and isolated island polygons were excluded from the final output. The contours were then clipped to the boundary of the map area. A map that shows these data is published in Open-File Report 2015-1088, "California State Waters Map Series--Offshore of Tomales Point, California." This layer is part of USGS Data Series 781. In 2007, the California Ocean Protection Council initiated the California Seafloor Mapping Program (CSMP) to create a comprehensive seafloor map of high-resolution bathymetry, marine benthic habitats and geology within the 3-nautical-mile limit of California's State Waters. CSMP has divided coastal California into 110 map blocks, each to be published individually as United States Geological Survey Open-File Reports (OFRs) or Scientific Investigations Maps (SIMs) at a scale of 1:24,000. Maps display seafloor morphology and character, identify potential marine benthic habitats and illustrate both the seafloor geology and shallow (to about 100 m) subsurface geology. Data layers for bathymetry, bathymetric contours, acoustic backscatter, seafloor character, potential benthic habitat and offshore geology were created for each map block, as well as regional-scale data layers for sediment thickness, depth to transition, transgressive contours, isopachs, predicted distributions of benthic macro-invertebrates and visual observations of benthic habitat from video cruises over the entire state. Part of the marine habitat mapping data for the California North Central Coast Mapping Project (NCCMP), this coverage can be used to to aid in assessments and mitigation of geologic hazards in the coastal region and to provide sufficient geologic information for land-use and land-management decisions both onshore and offshore. These data are intended for science researchers, students, policy makers, and the general public. This information is not intended for navigational purposes.The data can be used with geographic information systems (GIS) software to display geologic and oceanographic information. Dartnell, P., Kvitek, R.G., and Bretz, C.K. (2014). Contours (10m): Offshore of Tomales Point, California, 2010. California State Waters Map Series Data Catalog: U.S. Geological Survey Data Series 781. Available at: http://purl.stanford.edu/rt793kd9427. This layer is presented in the WGS84 coordinate system for web display purposes. Downloadable data are provided in native coordinate system or projection.

    View full record

  10. Title: Bathymetry: Offshore of Refugio Beach, California, 2015

    Contributors:

    Summary: This layer is a georeferenced raster image containing bathymetric data for the offshore area of Refugio Beach, California. The bathymetric map of the area was generated from data collected by the U.S. Geological Survey (USGS). for the U.S. Army Corps of Engineers (USACE) Joint Lidar Bathymetry Technical Center of Expertise. The offshore region was mapped by the USGS in 2008, using a 234.5-kHz SEA (AP) Ltd. SWATHplus-M phase-differencing sidescan sonar. The nearshore bathymetry and coastal topography were mapped for USACE by Fugro Pelagos in 2009, using the SHOALS-1000T bathymetric-lidar and Leica ALS60 topographic-lidar systems. All these mapping missions combined to collect bathymetry from the 0-m isobath to beyond the 3-nautical-mile limit of California¡s State Waters. A map that show these data are published in Scientific Investigations Map 3319, "California State Waters Map Series--Offshore of Refugio Beach, California." This layer is part of USGS Data Series 781. In 2007, the California Ocean Protection Council initiated the California Seafloor Mapping Program (CSMP) to create a comprehensive seafloor map of high-resolution bathymetry, marine benthic habitats and geology within the 3-nautical-mile limit of California's State Waters. CSMP has divided coastal California into 110 map blocks, each to be published individually as United States Geological Survey Open-File Reports (OFRs) or Scientific Investigations Maps (SIMs) at a scale of 1:24,000. Maps display seafloor morphology and character, identify potential marine benthic habitats and illustrate both the seafloor geology and shallow (to about 100 m) subsurface geology. Data layers for bathymetry, bathymetric contours, acoustic backscatter, seafloor character, potential benthic habitat and offshore geology were created for each map block, as well as regional-scale data layers for sediment thickness, depth to transition, transgressive contours, isopachs, predicted distributions of benthic macro-invertebrates and visual observations of benthic habitat from video cruises over the entire state. This coverage can be used to to aid in assessments and mitigation of geologic hazards in the coastal region and to provide sufficient geologic information for land-use and land-management decisions both onshore and offshore. These data are intended for science researchers, students, policy makers, and the general public. This information is not intended for navigational purposes. Dartnell, P., Phillips, E.L., Finlayson, D.P. (2015). Bathymetry: Offshore of Refugio Beach, California, 2015. California State Waters Map Series Data Catalog: U.S. Geological Survey Data Series 781. Available at: http://purl.stanford.edu/fv477rc3507. Information for the related USGS Pacific Coastal and Marine Science Center data collection field activity, S-8-08-SC online at http://walrus.wr.usgs.gov/infobank/s/s808sc/html/s-8-08-sc.meta.html. This layer is presented in the WGS84 coordinate system for web display purposes. Downloadable data are provided in native coordinate system or projection.

    View full record

  11. Title: Folds: Offshore of Tomales Point, California, 2010

    Contributors:

    Summary: This line shapefile depicts geologic folds within the offshore area of Tomales Point, California. The Point Reyes Peninsula is bounded to the south and west in the offshore by the north- and east-dipping Point Reyes Thrust Fault (McCulloch, 1987; Heck and others, 1990), which lies about 20 km west of Tomales Point. Granitic basement rocks are offset about 1.4 km on this thrust fault offshore of Point Reyes (McCulloch, 1987), and this uplift combined with west-side-up offset on the San Andreas Fault (Grove and Niemi, 2005) resulted in uplift of the Point Reyes Peninsula, including Tomales Point and the adjacent continental shelf. Grove and others (2010) reported uplift rates of as much as 1 mm/yr for the south flank of the Point Reyes Peninsula based on marine terraces, but reported no datable terrace surfaces that could constrain uplift for the flight of 4-5 terraces exposed farther north along Tomales Point. Folds were primarily mapped by interpretation of seismic reflection profile data (see field activity S-15-10-NC). The seismic reflection profiles were collected between 2007 and 2010. A map that shows these data is published in Open-File Report 2015-1088, "California State Waters Map Series--Offshore of Tomales Point, California." This layer is part of USGS Data Series 781. In 2007, the California Ocean Protection Council initiated the California Seafloor Mapping Program (CSMP) to create a comprehensive seafloor map of high-resolution bathymetry, marine benthic habitats and geology within the 3-nautical-mile limit of California's State Waters. CSMP has divided coastal California into 110 map blocks, each to be published individually as United States Geological Survey Open-File Reports (OFRs) or Scientific Investigations Maps (SIMs) at a scale of 1:24,000. Maps display seafloor morphology and character, identify potential marine benthic habitats and illustrate both the seafloor geology and shallow (to about 100 m) subsurface geology. Data layers for bathymetry, bathymetric contours, acoustic backscatter, seafloor character, potential benthic habitat and offshore geology were created for each map block, as well as regional-scale data layers for sediment thickness, depth to transition, transgressive contours, isopachs, predicted distributions of benthic macro-invertebrates and visual observations of benthic habitat from video cruises over the entire state. This coverage can be used to to aid in assessments and mitigation of geologic hazards in the coastal region and to provide sufficient geologic information for land-use and land-management decisions both onshore and offshore. These data are intended for science researchers, students, policy makers, and the general public. This information is not intended for navigational purposes.The data can be used with geographic information systems (GIS) software to display geologic and oceanographic information. Hartwell, S.R., Johnson, S.Y., and Manson, M.W. (2014). Folds: Offshore of Tomales Point, California, 2010. California State Waters Map Series Data Catalog: U.S. Geological Survey Data Series 781. Available at: http://purl.stanford.edu/jf036dx3445. Map political location: San Mateo County, California Compilation scale: 1:24,000 Base maps used are hillshades generated from IfSAR, LiDAR, and multibeam mapping both onshore and offshore (see Bathymetry Hillshade--Offshore of Tomales Point, California, DS 781, for more information). . References Cited Grove, K., and Niemi, T.M., 2005, Late Quaternary deformation and slip rates in the northern San Andreas fault zone at Olema Valley, Marin County, California: Tectonophysics, v. 401, p. 231-250. Grove, K, Sklar, L.S., Scherer, A.M., Lee, G., and Davis, J., 2010, Accelerating and spatially-varying crustal uplift and its geomorphic expression, San Andreas fault zone north of San Francisco, California: Tectonophysics, v. 495, p. 256-268. Heck, R.G., Edwards, E.B., Kronen, J.D., Jr., and Willingham, C.R., 1990, Petroleum potential of the offshore outer Santa Cruz and Bodega basins, California, in Garrison, R.E., Greene, H.G., Hicks, K.R., Weber, G.E., and Wright, T.L., eds. Geology and tectonics of the central California coastal region, San Francisco to Monterey: Pacific Section, American Association of Petroleum Geologists Bulletin GB67, p. 143-164. McCulloch, D.S., 1987, Regional geology and hydrocarbon potential of offshore central California, in Scholl, D.W., Grantz, A., and Vedder, J.G., eds., Geology and Resource Potential of the Continental Margin of Western North America and Adjacent Oceans Beaufort Sea to Baja California: Houston, Texas, Circum-Pacific Council for Energy and Mineral Resources, Earth Science Series, v. 6., p. 353-401. This layer is presented in the WGS84 coordinate system for web display purposes. Downloadable data are provided in native coordinate system or projection.

    View full record

  12. Title: Faults: Offshore of Refugio Beach, California, 2012

    Contributors:

    Summary: This line shapefile contains fault lines within the offshore area of Refugio Beach, California. This map area lies within the Western Transverse Ranges province, north of the southern California Borderland (Fisher and others, 2009). This province has undergone significant north-south compression since the Miocene, and recent global positioning system (GPS) data suggest north-south shortening of about 6 mm/yr (Larson and Webb, 1992). The active west-trending Pitas Point Fault (broad zone including back faults), Red Mountain Fault, and Rincon Creek Fault are some of the structures on which this shortening occurs (e.g., Jackson and Yeats, 1982; Sorlien and others, 2000; Fisher and others, 2009). This fault system, in aggregate, extends for about 100 km through the Ventura and Santa Barbara basins and represents an important earthquake hazard (e.g., Fisher and others, 2009). A map that show these data are published in Scientific Investigations Map 3319, "California State Waters Map Series--Offshore of Refugio Beach, California." This layer is part of USGS Data Series 781. In 2007, the California Ocean Protection Council initiated the California Seafloor Mapping Program (CSMP) to create a comprehensive seafloor map of high-resolution bathymetry, marine benthic habitats and geology within the 3-nautical-mile limit of California's State Waters. CSMP has divided coastal California into 110 map blocks, each to be published individually as United States Geological Survey Open-File Reports (OFRs) or Scientific Investigations Maps (SIMs) at a scale of 1:24,000. Maps display seafloor morphology and character, identify potential marine benthic habitats and illustrate both the seafloor geology and shallow (to about 100 m) subsurface geology. Data layers for bathymetry, bathymetric contours, acoustic backscatter, seafloor character, potential benthic habitat and offshore geology were created for each map block, as well as regional-scale data layers for sediment thickness, depth to transition, transgressive contours, isopachs, predicted distributions of benthic macro-invertebrates and visual observations of benthic habitat from video cruises over the entire state. This coverage can be used to to aid in assessments and mitigation of geologic hazards in the coastal region and to provide sufficient geologic information for land-use and land-management decisions both onshore and offshore. These data are intended for science researchers, students, policy makers, and the general public. This information is not intended for navigational purposes.The data can be used with geographic information systems (GIS) software to display geologic and oceanographic information. Conrad, J.E., Ritchie, A.C., Johnson, S.Y. (2015). Faults: Offshore of Refugio Beach, California, 2012. California State Waters Map Series Data Catalog: U.S. Geological Survey Data Series 781. Available at: http://purl.stanford.edu/yg931nr6687. Map political location: Santa Barbara County, California Compilation scale: 1:24,000 Base maps used are hillshades generated from IfSAR, LiDAR, and multibeam mapping both onshore and offshore (see sheet 2, SIM 3319, for more information). References Cited: Fisher, M.A., Sorlien, C.C., and Sliter, R.W., 2009, Potential earthquake faults offshore southern California from the eastern Santa Barbara channel to Dana Point, in Lee, H.J., and Normark, W.R., eds., 2009, Earth science in the urban ocean: The Southern California Continental Borderland: Geological Society of America Special Paper 454, p. 271-290. Jackson, P.A., and Yeats, R.S., 1982, Sructural evolution of Carpinteria basin, western Tranverse Ranges, California: American Association of Petroleum Geologists Bulletin, v. 66, p. 805-829. Larson, K.M., and Webb, F.H., 1992, Deformation in the Santa Barbara Channel from GPS measurements 1987-1991: Geophysical News Letters, v. 19, p. 1491-1494. Sorlien, C.C., Gratier, J.P., Luyendyk, B.P., Hornafius, J.S., and Hopps, T.E., 2000, Map restoration of folded and faulted late Cenozoic strata across the Oak Ridge fault, onshore and offshore Ventura basin, California: Geological Society of America Bulletin, v. 112, p. 1080-1090. This layer is presented in the WGS84 coordinate system for web display purposes. Downloadable data are provided in native coordinate system or projection.

    View full record

  13. Title: Geology: Offshore of Refugio Beach, California, 2012

    Contributors:

    Summary: This polygon shapefile contains geological features for the offshore area of Refugio Beach, California. The offshore Refugio Beach map area largely consists of a gently offshore-dipping (<1 degree) shelf (10 to ~ 90 m) underlain by sediments derived primarily from relatively small coastal watersheds draining the Santa Ynez Mountains. Nearshore and shelf deposits are primarily sand (Qms) at depths less than about 45 m and more fine-grained sediment - very fine sand, silt and clay (Qmsf), at depths greater than about 45 m. The boundary between Qms and Qmsf is based on observations and extrapolation from sediment sampling (for example, Reid and others, 2006) and camera groundtruthing. The Qms-Qmsf boundary is transitional and approximate, expected to shift based on seasonal to annual to decadal scale cycles in wave climate, sediment supply, and sediment transport. Fine-grained deposits similar to Qmsf also occur below the shelfbreak on the upper slope at water depths greater than 90 m, where they are broken out as a separate unit (Qmsl) based on their location and geomorphology. More coarse-grained deposits recognized on the basis of high backscatter and in some cases moderate seafloor relief have two modes of occurrence. In the relative nearshore (10 to 30 m water depth), coarse-grained strata (Qmsc) underlie laterally coalescing and discontinuous bars at the mouths of steep coastal watersheds. Coarser-grained sediments also form several distinct lobes (Qmscl) in water depths of 25 to 70 m, about 600 to 3,000 m offshore. The lobes range in size from ~100,000 m2 to ~1.5 km2 and are mapped on the basis of high backscatter and subtle positive seafloor relief. These coarse-grained strata were clearly derived from fluvial point sources in the adjacent, steep Santa Ynez Mountains. Bedrock exposures in the nearshore west of El Capitan are assigned to the Miocene Monterey Formation based on proximity to coastal outcrops mapped by Dibblee (1981a, b). Much of the outer shelf (water depths greater than 70 m) is also underlain by undifferentiated Tertiary bedrock (Tbu). Based on the regional cross sections constrained by deep seismic-reflection data and borehole logs (Heck, 1998; Tennyson and Kropp, 1998; Forman and Redin, 2005; Redin, 2005) and high-resolution seismic-reflection data coupled with proprietary oil industry dartcore data (Ashley, 1977), these outer-shelf outcrops consist of the Miocene Sisquoc Formation and the Pliocene Repetto and Pico Formations. These rocks have been uplifted in a large, warped, regional south-dipping homocline that formed above the blind, north-dipping North Channel fault. The fault tip is inferred at about 1.5 sec TWT (~2 km) about 6 to 7 km offshore, beneath the slope and just outside California's State Waters. Bedrock that underlies some parts of the shelf is overlain by a thin (< 1 m?) sediment veneer, recognized based on high backscatter, flat relief, continuity with moderate to high relief bedrock outcrops, and (in some cases) high-resolution, seismic-reflection data (Qms/Qtbu. Qms/Tbu, Qms/Tm). These sediment layers are likely ephemeral - they may or may not be present based on storms, seasonal/annual patterns of sediment movement, or longer-term climate cycles. This area has a long history of petroleum production (Barnum, 1998), and grouped to solitary pockmarks (Qmp) caused by gas seeps are common features in the offshore Refugio map area. Shell discovered the Molino gas field in 1962, 4 km offshore in the southwest part of the map area. Production, by onshore directional drilling of an anticlinal trap, has been underway since the 1960's (Galloway, 1998). A map that show these data are published in Scientific Investigations Map 3319, "California State Waters Map Series--Offshore of Refugio Beach, California." This layer is part of USGS Data Series 781. In 2007, the California Ocean Protection Council initiated the California Seafloor Mapping Program (CSMP) to create a comprehensive seafloor map of high-resolution bathymetry, marine benthic habitats and geology within the 3-nautical-mile limit of California's State Waters. CSMP has divided coastal California into 110 map blocks, each to be published individually as United States Geological Survey Open-File Reports (OFRs) or Scientific Investigations Maps (SIMs) at a scale of 1:24,000. Maps display seafloor morphology and character, identify potential marine benthic habitats and illustrate both the seafloor geology and shallow (to about 100 m) subsurface geology. Data layers for bathymetry, bathymetric contours, acoustic backscatter, seafloor character, potential benthic habitat and offshore geology were created for each map block, as well as regional-scale data layers for sediment thickness, depth to transition, transgressive contours, isopachs, predicted distributions of benthic macro-invertebrates and visual observations of benthic habitat from video cruises over the entire state. This coverage can be used to to aid in assessments and mitigation of geologic hazards in the coastal region and to provide sufficient geologic information for land-use and land-management decisions both onshore and offshore. These data are intended for science researchers, students, policy makers, and the general public. This information is not intended for navigational purposes.The data can be used with geographic information systems (GIS) software to display geologic and oceanographic information. Conrad, J.E., Ritchie, A.C., Johnson, S.Y. (2015). Geology: Offshore of Refugio Beach, California, 2012. California State Waters Map Series Data Catalog: U.S. Geological Survey Data Series 781. Available at: http://purl.stanford.edu/pp901rg4093. Map political location: Santa Barbara County, California Compilation scale: 1:24,000 Base maps used are hillshades generated from IfSAR, LiDAR, and multibeam mapping both onshore and offshore (see sheet 2, SIM 3319 for more information). ). References cited: Ashley, R.J., Berry, R.W., and Fischer, P.J., 1977, Offshore geology and sediment distribution of the El Capitan-Gaviota continental shelf, northern Santa Barbara Channel, California: Journal of Sedimentary Petrology, v. 47, no, 1, p. 199-208. Barnum, H.P., 1998, Redevelopment of the western portion of the Rincon offshore oil field, Ventura, California, in Kunitomi, D.S., Hopps, T.E., and Galloway, J.M., eds., Structure and petroleum geology, Santa Barbara Channel, California: American Association of Petroleum Geologists, p. 201â215. Dibblee, T.W., Jr., 1981a, Geologic map of the Tajiquas Quadrangle, California: U.S. Geological Survey Open-File Report 81-371, 1:24,000. Dibblee, T.W., Jr., 1981b, Geologic map of the Gaviota Quadrangle, California: U.S. Geological Survey Open-File Report 81-374, 1:24,000. Dibblee, T.W., Jr., 1981c, Geologic map of the Santa Ynez Quadrangle, California: U.S. Geological Survey Open-File Report 81-371, 1:24,000. Dibblee, T.W., Jr., 1981d, Geologic map of the Solvang Quadrangle, California: U.S. Geological Survey Open-File Report 81-372, 1:24,000. Forman, J., and Redin, T., 2005, Santa Barbara Channel structure and correlation sections, Correlation Section no 37, Arroyo Hondo, Gaviota Quadrangle, Santa Ynez Mts. To North West Santa Rosa Island: American Association of Petroleum Geologists, Pacific Section, Publication CS 37, 1 sheet. Galloway, J.M., 1998, Chronology of petroleum exploration and development in the Santa Barbara channel area, offshore southern California, in Kunitomi, D.S., Hopps, T.E., and Galloway, J.M., eds., Structure and petroleum geology, Santa Barbara Channel, California: American Association of Petroleum Geologists, Pacific Section and Coast Geological Society, Miscellaneous Publication 46, p. 1â12, 1 sheet. Heck, R.G., 1998, Santa Barbara Channel Regional Formline Map, Top Monterey Formation, in Kunitomi, D.S., Hopps, T.E., and Galloway, J.M., 1998, Structure and Petroleum Geology, Santa Barbara Channel, California: American Association of Petroleum Geologists, Pacific Section, Miscellaneous Publication 46, Plate 1. Minor, S.A., Kellogg, K.S., Stanley, R.G., Gurrola, L.D., Keller, E.A., and Brandt, T.R., 2009, Geologic map of the Santa Barbara coastal plain area, Santa Barbara County, California: U.S. Geological Survey Scientific Investigations Map 3001, scale 1:25,000. Redin, T., 2005, Santa Barbara Channel structure and correlation sections, Correlation Section no 36, N-S structure and correlation section, western Santa Ynez Mountains across the Santa Barbara channel to Santa Rosa Island: American Association of Petroleum Geologists, Pacific Section, Publication CS 35, 1 sheet. Reid, J.A., Reid, J.M., Jenkins, C.J., Zimmerman, M., Williams, S.J., and Field, M.E., 2006,usSEABED:Pacific Coast (California Oregon, Washington) offshore surficial-sediment data release: U.S. Geological Survey Data Series 182, http://pubs.usgs.gov/ds/2006/182/. Tennyson, M.E., and Kropp, A.P., 1998, Regional cross section across Santa Barbara channel from northwestern Santa Rosa Island to Canada de Molina, in Kunitomi, D.S., Hopps, T.E., and Galloway, J.M., eds., in Structure and petroleum geology, Santa Barbara Channel, California: American Association of Petroleum Geologists, Pacific Section and Coast Geological Society, Miscellaneous Publication 46, 1 plate. This layer is presented in the WGS84 coordinate system for web display purposes. Downloadable data are provided in native coordinate system or projection.

    View full record

  14. Title: Backscatter: Offshore of Refugio Beach, California, 2015

    Contributors:

    Summary: This layer is a georeferenced raster image containing acoustic-backscatter data for the offshore area of Refugio Beach, California. The acoustic-backscatter map of the area was generated from data collected by the U.S. Geological Survey (USGS). The USGS mapped this region in the summer 2008 using a 234.5 kHz SEA (AP) Ltd. SWATHplus-M phase-differencing sidescan sonar. These data were later re-processed in 2012. Within the acoustic-backscatter imagery, brighter tones indicate higher backscatter intensity, and darker tones indicate lower backscatter intensity. The intensity represents a complex interaction between the acoustic pulse and the seafloor, as well as characteristics within the shallow subsurface, providing a general indication of seafloor texture and sediment type. Backscatter intensity depends on the acoustic source level; the frequency used to image the seafloor; the grazing angle; the composition and character of the seafloor, including grain size, water content, bulk density, and seafloor roughness; and some biological cover. Harder and rougher bottom types such as rocky outcrops or coarse sediment typically return stronger intensities (high backscatter, lighter tones), whereas softer bottom types such as fine sediment return weaker intensities (low backscatter, darker tones). A map that show these data are published in Scientific Investigations Map 3319, "California State Waters Map Series--Offshore of Refugio Beach, California." This layer is part of USGS Data Series 781. In 2007, the California Ocean Protection Council initiated the California Seafloor Mapping Program (CSMP) to create a comprehensive seafloor map of high-resolution bathymetry, marine benthic habitats and geology within the 3-nautical-mile limit of California's State Waters. CSMP has divided coastal California into 110 map blocks, each to be published individually as United States Geological Survey Open-File Reports (OFRs) or Scientific Investigations Maps (SIMs) at a scale of 1:24,000. Maps display seafloor morphology and character, identify potential marine benthic habitats and illustrate both the seafloor geology and shallow (to about 100 m) subsurface geology. Data layers for bathymetry, bathymetric contours, acoustic backscatter, seafloor character, potential benthic habitat and offshore geology were created for each map block, as well as regional-scale data layers for sediment thickness, depth to transition, transgressive contours, isopachs, predicted distributions of benthic macro-invertebrates and visual observations of benthic habitat from video cruises over the entire state. This coverage can be used to to aid in assessments and mitigation of geologic hazards in the coastal region and to provide sufficient geologic information for land-use and land-management decisions both onshore and offshore. These data are intended for science researchers, students, policy makers, and the general public. This information is not intended for navigational purposes.The data can be used with geographic information systems (GIS) software to display geologic and oceanographic information. Dartnell, P., Phillips, E.L., Finlayson, D.P. (2015). Backscatter: Offshore of Refugio Beach, California, 2015. California State Waters Map Series Data Catalog: U.S. Geological Survey Data Series 781. Available at: http://purl.stanford.edu/pb804hy8483. Information for the related USGS Pacific Coastal and Marine Science Center data collection field activities, S-8-08-SC online at http://walrus.wr.usgs.gov/infobank/s/s808sc/html/s-8-08-sc.meta.html. This layer is presented in the WGS84 coordinate system for web display purposes. Downloadable data are provided in native coordinate system or projection.

    View full record

  15. Title: Backscatter A (8101): Offshore of Tomales Point, California, 2010

    Contributors:

    Summary: This layer is a georeferenced raster image containing acoustic-backscatter data for the offshore area of Tomales Point, California. The acoustic-backscatter map of the area was generated from data collected by California State University, Monterey Bay (CSUMB), Fugro Pelagos and by the U.S. Geological Survey (USGS). Mapping was completed between 2004 and 2010, using a combination of 200-kHz and 400-kHz Reson 7125, and 244-kHz Reson 8101 multibeam echosounders, as well as 234-kHz and 468-kHz SEA SWATHPlus phase-differencing sidescan sonars. These mapping missions combined to collect backscatter data from about the 10-m isobath to beyond the 3-nautical-mile limit of California's State Waters. Within the acoustic-backscatter imagery, brighter tones indicate higher backscatter intensity, and darker tones indicate lower backscatter intensity. The intensity represents a complex interaction between the acoustic pulse and the seafloor, as well as characteristics within the shallow subsurface, providing a general indication of seafloor texture and composition. Backscatter intensity depends on the acoustic source level; the frequency used to image the seafloor; the grazing angle; the composition and character of the seafloor, including grain size, water content, bulk density, and seafloor roughness; and some biological cover. Harder and rougher bottom types such as rocky outcrops or coarse sediment typically return stronger intensities (high backscatter, lighter tones), whereas softer bottom types such as fine sediment return weaker intensities (low backscatter, darker tones). A map that shows these data is published in Open-File Report 2015-1088, "California State Waters Map Series--Offshore of Tomales Point, California." This layer is part of USGS Data Series 781. In 2007, the California Ocean Protection Council initiated the California Seafloor Mapping Program (CSMP) to create a comprehensive seafloor map of high-resolution bathymetry, marine benthic habitats and geology within the 3-nautical-mile limit of California's State Waters. CSMP has divided coastal California into 110 map blocks, each to be published individually as United States Geological Survey Open-File Reports (OFRs) or Scientific Investigations Maps (SIMs) at a scale of 1:24,000. Maps display seafloor morphology and character, identify potential marine benthic habitats and illustrate both the seafloor geology and shallow (to about 100 m) subsurface geology. Data layers for bathymetry, bathymetric contours, acoustic backscatter, seafloor character, potential benthic habitat and offshore geology were created for each map block, as well as regional-scale data layers for sediment thickness, depth to transition, transgressive contours, isopachs, predicted distributions of benthic macro-invertebrates and visual observations of benthic habitat from video cruises over the entire state. This coverage can be used to to aid in assessments and mitigation of geologic hazards in the coastal region and to provide sufficient geologic information for land-use and land-management decisions both onshore and offshore. These data are intended for science researchers, students, policy makers, and the general public. This information is not intended for navigational purposes.The data can be used with geographic information systems (GIS) software to display geologic and oceanographic information. Dartnell, P., Erdey, M.D., Kvitek, R.G., and Bretz, C.K. (2014). Backscatter A (8101): Offshore of Tomales Point, California, 2010. California State Waters Map Series Data Catalog: U.S. Geological Survey Data Series 781. Available at: http://purl.stanford.edu/tb879rs4686. None This layer is presented in the WGS84 coordinate system for web display purposes. Downloadable data are provided in native coordinate system or projection.

    View full record

  16. Title: Bathymetry Hillshade: Offshore of Tomales Point, California, 2010

    Contributors:

    Summary: This layer is a georeferenced raster image containing shaded relief (hillshade) data for the offshore area of Tomales Point, California. The bathymetric and shaded relief maps of the area were generated from data collected by California State University, Monterey Bay (CSUMB), Fugro Pelagos and by the U.S. Geological Survey (USGS). Mapping was completed between 2004 and 2010, using a combination of 200-kHz and 400-kHz Reson 7125, and 244-kHz Reson 8101 multibeam echosounders, as well as 234-kHz and 468-kHz SEA SWATHPlus phase-differencing sidescan sonars. These mapping missions combined to collect bathymetry from about the 10-m isobath to beyond the 3-nautical-mile limit of California's State Waters. A map that shows these data is published in Open-File Report 2015-1088, "California State Waters Map Series--Offshore of Tomales Point, California." This layer is part of USGS Data Series 781. In 2007, the California Ocean Protection Council initiated the California Seafloor Mapping Program (CSMP) to create a comprehensive seafloor map of high-resolution bathymetry, marine benthic habitats and geology within the 3-nautical-mile limit of California's State Waters. CSMP has divided coastal California into 110 map blocks, each to be published individually as United States Geological Survey Open-File Reports (OFRs) or Scientific Investigations Maps (SIMs) at a scale of 1:24,000. Maps display seafloor morphology and character, identify potential marine benthic habitats and illustrate both the seafloor geology and shallow (to about 100 m) subsurface geology. Data layers for bathymetry, bathymetric contours, acoustic backscatter, seafloor character, potential benthic habitat and offshore geology were created for each map block, as well as regional-scale data layers for sediment thickness, depth to transition, transgressive contours, isopachs, predicted distributions of benthic macro-invertebrates and visual observations of benthic habitat from video cruises over the entire state. This coverage can be used to to aid in assessments and mitigation of geologic hazards in the coastal region and to provide sufficient geologic information for land-use and land-management decisions both onshore and offshore. These data are intended for science researchers, students, policy makers, and the general public. This information is not intended for navigational purposes. Dartnell, P., Kvitek, R.G., and Bretz, C.K. (2014). Bathymetry Hillshade: Offshore of Tomales Point, California, 2010. California State Waters Map Series Data Catalog: U.S. Geological Survey Data Series 781. Available at: http://purl.stanford.edu/jv946qh2134. None This layer is presented in the WGS84 coordinate system for web display purposes. Downloadable data are provided in native coordinate system or projection.

    View full record

  17. Title: Backscatter B (7125): Offshore of Tomales Point, California, 2010

    Contributors:

    Summary: This layer is a georeferenced raster image containing acoustic-backscatter data for the offshore area of Tomales Point, California. The acoustic-backscatter map of the area was generated from data collected by California State University, Monterey Bay (CSUMB), Fugro Pelagos and by the U.S. Geological Survey (USGS). Mapping was completed between 2004 and 2010, using a combination of 200-kHz and 400-kHz Reson 7125, and 244-kHz Reson 8101 multibeam echosounders, as well as 234-kHz and 468-kHz SEA SWATHPlus phase-differencing sidescan sonars. These mapping missions combined to collect backscatter data from about the 10-m isobath to beyond the 3-nautical-mile limit of California's State Waters. Within the acoustic-backscatter imagery, brighter tones indicate higher backscatter intensity, and darker tones indicate lower backscatter intensity. The intensity represents a complex interaction between the acoustic pulse and the seafloor, as well as characteristics within the shallow subsurface, providing a general indication of seafloor texture and composition. Backscatter intensity depends on the acoustic source level; the frequency used to image the seafloor; the grazing angle; the composition and character of the seafloor, including grain size, water content, bulk density, and seafloor roughness; and some biological cover. Harder and rougher bottom types such as rocky outcrops or coarse sediment typically return stronger intensities (high backscatter, lighter tones), whereas softer bottom types such as fine sediment return weaker intensities (low backscatter, darker tones). A map that shows these data is published in Open-File Report 2015-1088, "California State Waters Map Series--Offshore of Tomales Point, California." This layer is part of USGS Data Series 781. In 2007, the California Ocean Protection Council initiated the California Seafloor Mapping Program (CSMP) to create a comprehensive seafloor map of high-resolution bathymetry, marine benthic habitats and geology within the 3-nautical-mile limit of California's State Waters. CSMP has divided coastal California into 110 map blocks, each to be published individually as United States Geological Survey Open-File Reports (OFRs) or Scientific Investigations Maps (SIMs) at a scale of 1:24,000. Maps display seafloor morphology and character, identify potential marine benthic habitats and illustrate both the seafloor geology and shallow (to about 100 m) subsurface geology. Data layers for bathymetry, bathymetric contours, acoustic backscatter, seafloor character, potential benthic habitat and offshore geology were created for each map block, as well as regional-scale data layers for sediment thickness, depth to transition, transgressive contours, isopachs, predicted distributions of benthic macro-invertebrates and visual observations of benthic habitat from video cruises over the entire state. This coverage can be used to to aid in assessments and mitigation of geologic hazards in the coastal region and to provide sufficient geologic information for land-use and land-management decisions both onshore and offshore. These data are intended for science researchers, students, policy makers, and the general public. This information is not intended for navigational purposes.The data can be used with geographic information systems (GIS) software to display geologic and oceanographic information. Dartnell, P., Erdey, M.D., Kvitek, R.G., and Bretz, C.K. (2014). Backscatter B (7125): Offshore of Tomales Point, California, 2010. California State Waters Map Series Data Catalog: U.S. Geological Survey Data Series 781. Available at: http://purl.stanford.edu/sb976wc2810. None This layer is presented in the WGS84 coordinate system for web display purposes. Downloadable data are provided in native coordinate system or projection.

    View full record

  18. Title: Seafloor Character: Offshore of Refugio Beach, California, 2015

    Contributors:

    Summary: This layer is a georeferenced raster image containing seafloor character data for the offshore area of Refugio Beach, California. A map that show these data are published in Scientific Investigations Map 3319, "California State Waters Map Series--Offshore of Refugio Beach, California." This layer is part of USGS Data Series 781. In 2007, the California Ocean Protection Council initiated the California Seafloor Mapping Program (CSMP) to create a comprehensive seafloor map of high-resolution bathymetry, marine benthic habitats and geology within the 3-nautical-mile limit of California's State Waters. CSMP has divided coastal California into 110 map blocks, each to be published individually as United States Geological Survey Open-File Reports (OFRs) or Scientific Investigations Maps (SIMs) at a scale of 1:24,000. Maps display seafloor morphology and character, identify potential marine benthic habitats and illustrate both the seafloor geology and shallow (to about 100 m) subsurface geology. Data layers for bathymetry, bathymetric contours, acoustic backscatter, seafloor character, potential benthic habitat and offshore geology were created for each map block, as well as regional-scale data layers for sediment thickness, depth to transition, transgressive contours, isopachs, predicted distributions of benthic macro-invertebrates and visual observations of benthic habitat from video cruises over the entire state. These data are intended for science researchers, students, policy makers, and the general public. This information is not intended for navigational purposes.The data can be used with geographic information systems (GIS) software to display geologic and oceanographic information. Additionally, this coverage can provide a geologic map for the public and geoscience community to aid in assessments and mitigation of geologic hazards in the coastal region and sufficient geologic information for land-use and land-management decisions both onshore and offshore. This information is not intended for navigational purposes. Phillips, E.L., Erdey, M.D., Cochrane, G.R. (2015). Seafloor Character: Offshore of Refugio Beach, California, 2015. California State Waters Map Series Data Catalog: U.S. Geological Survey Data Series 781. Available at: http://purl.stanford.edu/tt733rj5282. Information for USGS Coastal and Marine Geology related activities are online at http://walrus.wr.usgs.gov/infobank/z/z206sc/html/z-2-06-sc.meta.html and http://walrus.wr.usgs.gov/infobank/z/z107sc/html/z-1-07-sc.meta.html This layer is presented in the WGS84 coordinate system for web display purposes. Downloadable data are provided in native coordinate system or projection.

    View full record

  19. Title: Geology: Offshore of Tomales Point, California, 2010

    Contributors:

    Summary: This polygon shapefile depicts geologic features within the offshore area of Tomales Point, California. The morphology and the geology of the offshore part of the Offshore of Tomales Point map area result from the interplay between tectonics, sea-level rise, local sedimentary processes, and oceanography. The map area is cut by the northwest-trending San Andreas Fault, the right-lateral transform boundary between the North American and Pacific tectonic plates. The San Andreas strikes through Tomales Bay, the northern part of a linear valley that extends from Bolinas through Olema Valley to Bodega Bay, separating mainland California from the Point Reyes Peninsula. Onshore investigations indicate that this section of the San Andreas Fault has an estimated slip rate of about 17 to 25 mm/yr (Bryant and Lundberg, 2002; Grove and Niemi, 2005). The devastating Great 1906 California earthquake (M 7.8) is thought to have nucleated on the San Andreas Fault about 50 kilometers south of this map area offshore of San Francisco (e.g., Bolt, 1968; Lomax, 2005), with the rupture extending northward through the Offshore of Tomales Point map area to the south flank of Cape Mendocino (Lawson, 1908; Brown and Wolfe, 1972). The Point Reyes Peninsula is bounded to the south and west in the offshore by the north- and east-dipping Point Reyes Thrust Fault (McCulloch, 1987; Heck and others, 1990), which lies about 20 km west of Tomales Point. Granitic basement rocks are offset about 1.4 km on this thrust fault offshore of Point Reyes (McCulloch, 1987), and this uplift combined with west-side-up offset on the San Andreas Fault (Grove and Niemi, 2005) resulted in uplift of the Point Reyes Peninsula, including Tomales Point and the adjacent continental shelf. Grove and others (2010) reported uplift rates of as much as 1 mm/yr for the south flank of the Point Reyes Peninsula based on marine terraces, but reported no datable terrace surfaces that could constrain uplift for the flight of 4-5 terraces exposed farther north along Tomales Point. Because of this Quaternary uplift and relative lack of sediment supply from coastal watersheds, there is extensive rugged, rocky seafloor beneath the continental shelf in the Offshore of Tomales Point map area. Granitic rocks (unit Kg) on the seafloor are mapped on the basis of massive character, roughness, extensive fractures, and high backscatter (see Backscattter A to D--Offshore of Tomales Point, California, DS 781, for more information). Neogene sedimentary rocks (units Tl and Tu) commonly form distinctive "ribs," created by differential seafloor erosion of dipping beds of variable resistance. The more massive offshore outcrops of unit Tu in the southern part of the map area are inferred to represent more uniform lithologies. Slopes on the granitic seafloor (generally 1 to 1.3 degrees) are greater than those over sedimentary rock (generally about 0.5 to 0.6 degrees). Sediment-covered areas occur in gently sloping (less than about 0.6 degrees) mid-shelf environments west and north of Tomales Point, and at the mouth of Tomales Bay. Sediment supply is local, limited to erosion from local coastal bluffs and dunes, small coastal watersheds, and sediment flux out of the mouth of Tomales Bay. Shelf morphology and evolution largely reflects eustacy; sea level has risen about 125 to 130 m over about the last 21,000 years (for example, Lambeck and Chappell, 2001; Peltier and Fairbanks, 2005), leading to broadening of the continental shelf, progressive eastward migration of the shoreline and wave-cut platform, and associated transgressive erosion and deposition. Given present exposure to high wave energy, modern nearshore to mid-shelf sediments are mostly sand (unit Qms) and a mix of sand, gravel, and cobbles (units Qmsc and Qmsd). These sediments are distributed between rocky outcrops at water depths of as much as 65 m (see below). The more coarse-grained sands and gravels (units Qmsc and Qmsd) are primarily recognized on the basis of bathymetry and high backscatter. Unit Qmsd forms erosional lags in scoured depressions that are bounded by relatively sharp contacts with bedrock or sharp to diffuse contacts with units Qms and Qmsc. These scoured depressions are typically a few tens of centimeters deep and range in size from a few 10's of sq m to more than one sq km. Similar unit Qmsd scour depressions are common along this stretch of the California coast (see, for example, Cacchione and others, 1984; Hallenbeck and others, 2012) where surficial offshore sandy sediment is relatively thin (thus unable to fill the depressions) due to both lack of sediment supply and to erosion and transport of sediment during large northwest winter swells. Such features have been referred to as rippled-scour depressions (see, for example, Cacchione and others, 1984) or sorted bedforms (see, for example, Goff and others, 2005; Trembanis and Hume, 2011). Although the general areas in which both unit Qmsd scour depressions and surrounding mobile sand sheets occur are not likely to change substantially, the boundaries of the individual Qmsd depressions are likely ephemeral, changing seasonally and during significant storm events. Unit Qmsf consists primarily of mud and muddy sand and is commonly extensively bioturbated. The location of the inboard contact at water depths of about 65 m is based on meager sediment sampling and photographic data and the inference that if must lie offshore of the outer boundary of coarse-grained units Qmsd and Qmsc. This is notably deeper than the inner contact of unit Qmsf offshore of the nearby Russian River (about 50 m; Klise, 1983) which could may reflect both increased wave energy and significantly decreased supply of muddy sediment. There are two areas of high-backscatter, rough seafloor at water depths of 65 to 70 m west of northern Tomales Point. These areas are notable in that each includes several small (less than about 20,000 sq m), randomly distributed to northwest-trending, irregular "mounds," with as much as 1 m of positive relief above the seafloor (unit Qsr). Seismic-reflection data (see field activity S-15-10-NC) reveal this lumpy material rests on several meters of latest Pleistoce to Holocene sediment and is thus not bedrock outcrop. Rather, it seems likely that this material is marine debris, possibly derived from one (or more) of the more than 60 shipwrecks that have occurred offshore of the Point Reyes Peninsula between 1849 and 1940 (National Park Service, 2012). It is also conceivable that this lumpy terrane consists of biological "hardgrounds" Units Qsw, Qstb, Qdtb, and Qsdtb comprise sediments in Tomales Bay. Anima and others (2008) conducted a high-resolution bathymetric survey of Tomales Bay and noted that strong tidal currents at the mouth of the bay had created a large field of sandwaves, dunes, and flats (unit Qsw). Unit Qkdtb is a small subaqueous sandy delta deposited at the mouth of Keys Creek, the largest coastal watershed draining into this northern part of Tomales Bay. Unit Qstb occurs south of units Qsw and Qdtb, and comprises largely flat seafloor underlain by mixed sand and silt. Unit Qdtb consists of depressions within the sedimentary fill of Tomales Bay. These depressions commonly occur directly offshore of coastal promontories, cover as much as 74,000 sq m, and are as deep as 9 m. Map unit polygons were digitized over underlying 2-meter base layers developed from multibeam bathymetry and backscatter data (see Bathymetry--Offshore of Tomales Point, California and Backscattter A to D--Offshore of Tomales Point, California, DS 781). The bathymetry and backscatter data were collected between 2006 and 2010. A map that shows these data is published in Open-File Report 2015-1088, "California State Waters Map Series--Offshore of Tomales Point, California." This layer is part of USGS Data Series 781. In 2007, the California Ocean Protection Council initiated the California Seafloor Mapping Program (CSMP) to create a comprehensive seafloor map of high-resolution bathymetry, marine benthic habitats and geology within the 3-nautical-mile limit of California's State Waters. CSMP has divided coastal California into 110 map blocks, each to be published individually as United States Geological Survey Open-File Reports (OFRs) or Scientific Investigations Maps (SIMs) at a scale of 1:24,000. Maps display seafloor morphology and character, identify potential marine benthic habitats and illustrate both the seafloor geology and shallow (to about 100 m) subsurface geology. Data layers for bathymetry, bathymetric contours, acoustic backscatter, seafloor character, potential benthic habitat and offshore geology were created for each map block, as well as regional-scale data layers for sediment thickness, depth to transition, transgressive contours, isopachs, predicted distributions of benthic macro-invertebrates and visual observations of benthic habitat from video cruises over the entire state. This coverage can be used to to aid in assessments and mitigation of geologic hazards in the coastal region and to provide sufficient geologic information for land-use and land-management decisions both onshore and offshore. These data are intended for science researchers, students, policy makers, and the general public. This information is not intended for navigational purposes.The data can be used with geographic information systems (GIS) software to display geologic and oceanographic information. Hartwell, S.R., Johnson, S.Y., and Manson, M.W. (2014). Geology: Offshore of Tomales Point, California, 2010. California State Waters Map Series Data Catalog: U.S. Geological Survey Data Series 781. Available at: http://purl.stanford.edu/zg934rd8487. Map political location: San Mateo County, California Compilation scale: 1:24,000 Base maps used are hillshades generated from IfSAR, LiDAR, and multibeam mapping both onshore and offshore (see Bathymetry Hillshade--Offshore of Tomales Point, California, DS 781, for more information). References Cited Anima, R. A., Chin, J.L., Finlayson, D.P., McGann, M.L., and Wong, F.L., 2008, Interferometric sidescan bathymetry, sediment and foraminiferal analyses; a new look at Tomales Bay, California: U.S. Geological Survey Open-File Report 2008 - 1237, 33 p. Brown, R.D., Jr., and Wolfe, E.W., 1972, Map showing recently active breaks along the San Andreas Fault between Point Delgada and Bolinas Bay, California: U.S. Geological Survey Miscellaneous Investigations Map I-692, scale 1:24,000. Bryant, W.A., and Lundberg, M.M., compilers, 2002, Fault number 1b, San Andreas fault zone, North Coast section, in Quaternary fault and fold database of the United States: U.S. Geological Survey website, accessed April 4, 2013 at http://earthquakes.usgs.gov/hazards/qfaults. Cacchione, D.A., Drake, D.E., Grant, W.D., and Tate, G.B., 1984, Rippled scour depressions of the inner continental shelf off central California: Journal of Sedimentary Petrology, v. 54, p. 1,280-1,291. Grove, K., and Niemi, T.M., 2005, Late Quaternary deformation and slip rates in the northern San Andreas fault zone at Olema Valley, Marin County, California: Tectonophysics, v. 401, p. 231-250. Grove, K, Sklar, L.S., Scherer, A.M., Lee, G., and Davis, J., 2010, Accelerating and spatially-varying crustal uplift and its geomorphic expression, San Andreas fault zone north of San Francisco, California: Tectonophysics, v. 495, p. 256-268. Klise, D.H., 1984, Modern sedimentation on the California continental margin adjacent to the Russian River: M.S. thesis, San Jose State University, 120 p. Hallenbeck, T.R., Kvitek, R.G., and Lindholm, J., 2012, Rippled scour depressions add ecologically significant heterogeneity to soft-bottom habitats on the continental shelf: Marine Ecology Progress Series, v. 468, p. 119-133. Lambeck, K., and Chappell, J., 2001, Sea level change through the last glacial cycle: Science, v. 292, p. 679-686, doi: 10.1126/science.1059549. Lawson, A.C., ed., 1908, The California earthquake of April 18, 1906, Report of the State Earthquake Investigation Commission: Carnegie Institution of Washington Publication 87, v. 1, 1451 p. and atlas. Lomax, A., 2005, A reanalysis of the hypocentral location and related observations for the Great 1906 California earthquake: Bulletin of the Seismological Society of America, v. 95, p. 861-877. McCulloch, D.S., 1987, Regional geology and hydrocarbon potential of offshore central California, in Scholl, D.W., Grantz, A., and Vedder, J.G., eds., Geology and Resource Potential of the Continental Margin of Western North America and Adjacent Oceans -- Beaufort Sea to Baja California: Houston, Texas, Circum-Pacific Council for Energy and Mineral Resources, Earth Science Series, v. 6., p. 353-401. National Park Service, 2012, Shipwrecks at Point Reyes, accessed May 1, 2013 at: http://www.nps.gov/pore/historyculture/upload/map_shipwrecks.pdf This layer is presented in the WGS84 coordinate system for web display purposes. Downloadable data are provided in native coordinate system or projection.

    View full record

  20. Title: Seafloor Character: Offshore of Fort Ross, California, 2010

    Contributors:

    Summary: This layer is a georeferenced raster image containing seafloor character data for the offshore area of Fort Ross, California. The seafloormaps were generated from data collected by California State University, Monterey Bay (CSUMB), and by Fugro Pelagos. This layer is part of USGS Data Series 781. In 2007, the California Ocean Protection Council initiated the California Seafloor Mapping Program (CSMP) to create a comprehensive seafloor map of high-resolution bathymetry, marine benthic habitats and geology within the 3-nautical-mile limit of California's State Waters. CSMP has divided coastal California into 110 map blocks, each to be published individually as United States Geological Survey Open-File Reports (OFRs) or Scientific Investigations Maps (SIMs) at a scale of 1:24,000. Maps display seafloor morphology and character, identify potential marine benthic habitats and illustrate both the seafloor geology and shallow (to about 100 m) subsurface geology. Data layers for bathymetry, bathymetric contours, acoustic backscatter, seafloor character, potential benthic habitat and offshore geology were created for each map block, as well as regional-scale data layers for sediment thickness, depth to transition, transgressive contours, isopachs, predicted distributions of benthic macro-invertebrates and visual observations of benthic habitat from video cruises over the entire state. These data are intended for science researchers, students, policy makers, and the general public. This information is not intended for navigational purposes.The data can be used with geographic information systems (GIS) software to display geologic and oceanographic information. Additionally, this coverage can provide a geologic map for the public and geoscience community to aid in assessments and mitigation of geologic hazards in the coastal region and sufficient geologic information for land-use and land-management decisions both onshore and offshore. This information is not intended for navigational purposes. Erdey, M.D. and Cochrane, G.R. (2014). Seafloor Character: Offshore of Fort Ross, California, 2010. California State Waters Map Series Data Catalog: U.S. Geological Survey Data Series 781. Available at: http://purl.stanford.edu/br915jk7481. Information for USGS Coastal and Marine Geology related activities are online at <http://walrus.wr.usgs.gov/infobank/l/l908nc/html/l-9-08-nc.meta.html> This layer is presented in the WGS84 coordinate system for web display purposes. Downloadable data are provided in native coordinate system or projection.

    View full record

Need help?

Ask GIS