Search for geospatial/GIS data

Find GIS data held at MIT and other institutions

1,072 results returned

  1. Title: Folds: Offshore of Refugio Beach, California, 2012

    Contributors:

    Summary: This line shapefile contains geologic folds for the offshore area of Refugio Beach, California. This map area lies within the Western Transverse Ranges province, north of the southern California Borderland (Fisher and others, 2009). This province has undergone significant north-south compression since the Miocene, and recent global positioning system (GPS) data suggest north-south shortening of about 6 mm/yr (Larson and Webb, 1992). The active west-trending Pitas Point Fault (broad zone including back faults), Red Mountain Fault, and Rincon Creek Fault are some of the structures on which this shortening occurs (e.g., Jackson and Yeats, 1982; Sorlien and others, 2000; Fisher and others, 2009). This fault system, in aggregate, extends for about 100 km through the Ventura and Santa Barbara basins and represents an important earthquake hazard (e.g., Fisher and others, 2009). A map that show these data are published in Scientific Investigations Map 3319, "California State Waters Map Series--Offshore of Refugio Beach, California." This layer is part of USGS Data Series 781. In 2007, the California Ocean Protection Council initiated the California Seafloor Mapping Program (CSMP) to create a comprehensive seafloor map of high-resolution bathymetry, marine benthic habitats and geology within the 3-nautical-mile limit of California's State Waters. CSMP has divided coastal California into 110 map blocks, each to be published individually as United States Geological Survey Open-File Reports (OFRs) or Scientific Investigations Maps (SIMs) at a scale of 1:24,000. Maps display seafloor morphology and character, identify potential marine benthic habitats and illustrate both the seafloor geology and shallow (to about 100 m) subsurface geology. Data layers for bathymetry, bathymetric contours, acoustic backscatter, seafloor character, potential benthic habitat and offshore geology were created for each map block, as well as regional-scale data layers for sediment thickness, depth to transition, transgressive contours, isopachs, predicted distributions of benthic macro-invertebrates and visual observations of benthic habitat from video cruises over the entire state. This coverage can be used to to aid in assessments and mitigation of geologic hazards in the coastal region and to provide sufficient geologic information for land-use and land-management decisions both onshore and offshore. These data are intended for science researchers, students, policy makers, and the general public. This information is not intended for navigational purposes.The data can be used with geographic information systems (GIS) software to display geologic and oceanographic information. Conrad, J.E., Ritchie, A.C., Johnson, S.Y. (2015). Folds: Offshore of Refugio Beach, California, 2012. California State Waters Map Series Data Catalog: U.S. Geological Survey Data Series 781. Available at: http://purl.stanford.edu/tp111fr3266. Map political location: Santa Barbara County, California Compilation scale: 1:24,000 Base maps used are hillshades generated from IfSAR, LiDAR, and multibeam mapping both onshore and offshore (see sheet 2, SIM 3319 for more information). References Cited: Fisher, M.A., Sorlien, C.C., and Sliter, R.W., 2009, Potential earthquake faults offshore southern California from the eastern Santa Barbara channel to Dana Point, in Lee, H.J., and Normark, W.R., eds., 2009, Earth science in the urban ocean: The Southern California Continental Borderland: Geological Society of America Special Paper 454, p. 271-290. Jackson, P.A., and Yeats, R.S., 1982, Sructural evolution of Carpinteria basin, western Tranverse Ranges, California: American Association of Petroleum Geologists Bulletin, v. 66, p. 805-829. Larson, K.M., and Webb, F.H., 1992, Deformation in the Santa Barbara Channel from GPS measurements 1987-1991: Geophysical News Letters, v. 19, p. 1491-1494. Sorlien, C.C., Gratier, J.P., Luyendyk, B.P., Hornafius, J.S., and Hopps, T.E., 2000, Map restoration of folded and faulted late Cenozoic strata across the Oak Ridge fault, onshore and offshore Ventura basin, California: Geological Society of America Bulletin, v. 112, p. 1080-1090. This layer is presented in the WGS84 coordinate system for web display purposes. Downloadable data are provided in native coordinate system or projection.

  2. Title: Contours: Offshore of Refugio Beach, California, 2015

    Contributors:

    Summary: This line shapefile contains bathymetric contours at 10 and 50 meter intervals for the offshore area of Refugio Beach, California. A map that show these data are published in Scientific Investigations Map 3319, "California State Waters Map Series--Offshore of Refugio Beach, California." This layer is part of USGS Data Series 781. In 2007, the California Ocean Protection Council initiated the California Seafloor Mapping Program (CSMP) to create a comprehensive seafloor map of high-resolution bathymetry, marine benthic habitats and geology within the 3-nautical-mile limit of California's State Waters. CSMP has divided coastal California into 110 map blocks, each to be published individually as United States Geological Survey Open-File Reports (OFRs) or Scientific Investigations Maps (SIMs) at a scale of 1:24,000. Maps display seafloor morphology and character, identify potential marine benthic habitats and illustrate both the seafloor geology and shallow (to about 100 m) subsurface geology. Data layers for bathymetry, bathymetric contours, acoustic backscatter, seafloor character, potential benthic habitat and offshore geology were created for each map block, as well as regional-scale data layers for sediment thickness, depth to transition, transgressive contours, isopachs, predicted distributions of benthic macro-invertebrates and visual observations of benthic habitat from video cruises over the entire state. This coverage can be used to to aid in assessments and mitigation of geologic hazards in the coastal region and to provide sufficient geologic information for land-use and land-management decisions both onshore and offshore. These data are intended for science researchers, students, policy makers, and the general public. This information is not intended for navigational purposes.The data can be used with geographic information systems (GIS) software to display geologic and oceanographic information. Ritchie, A.C., Dartnell, P., Kvitek, R.G., Johnson, S.Y. (2015). Contours: Offshore of Refugio Beach, California, 2015. California State Waters Map Series Data Catalog: U.S. Geological Survey Data Series 781. Available at: http://purl.stanford.edu/cj457gj7638. This layer is presented in the WGS84 coordinate system for web display purposes. Downloadable data are provided in native coordinate system or projection.

  3. Title: Faults: Offshore of Refugio Beach, California, 2012

    Contributors:

    Summary: This line shapefile contains fault lines within the offshore area of Refugio Beach, California. This map area lies within the Western Transverse Ranges province, north of the southern California Borderland (Fisher and others, 2009). This province has undergone significant north-south compression since the Miocene, and recent global positioning system (GPS) data suggest north-south shortening of about 6 mm/yr (Larson and Webb, 1992). The active west-trending Pitas Point Fault (broad zone including back faults), Red Mountain Fault, and Rincon Creek Fault are some of the structures on which this shortening occurs (e.g., Jackson and Yeats, 1982; Sorlien and others, 2000; Fisher and others, 2009). This fault system, in aggregate, extends for about 100 km through the Ventura and Santa Barbara basins and represents an important earthquake hazard (e.g., Fisher and others, 2009). A map that show these data are published in Scientific Investigations Map 3319, "California State Waters Map Series--Offshore of Refugio Beach, California." This layer is part of USGS Data Series 781. In 2007, the California Ocean Protection Council initiated the California Seafloor Mapping Program (CSMP) to create a comprehensive seafloor map of high-resolution bathymetry, marine benthic habitats and geology within the 3-nautical-mile limit of California's State Waters. CSMP has divided coastal California into 110 map blocks, each to be published individually as United States Geological Survey Open-File Reports (OFRs) or Scientific Investigations Maps (SIMs) at a scale of 1:24,000. Maps display seafloor morphology and character, identify potential marine benthic habitats and illustrate both the seafloor geology and shallow (to about 100 m) subsurface geology. Data layers for bathymetry, bathymetric contours, acoustic backscatter, seafloor character, potential benthic habitat and offshore geology were created for each map block, as well as regional-scale data layers for sediment thickness, depth to transition, transgressive contours, isopachs, predicted distributions of benthic macro-invertebrates and visual observations of benthic habitat from video cruises over the entire state. This coverage can be used to to aid in assessments and mitigation of geologic hazards in the coastal region and to provide sufficient geologic information for land-use and land-management decisions both onshore and offshore. These data are intended for science researchers, students, policy makers, and the general public. This information is not intended for navigational purposes.The data can be used with geographic information systems (GIS) software to display geologic and oceanographic information. Conrad, J.E., Ritchie, A.C., Johnson, S.Y. (2015). Faults: Offshore of Refugio Beach, California, 2012. California State Waters Map Series Data Catalog: U.S. Geological Survey Data Series 781. Available at: http://purl.stanford.edu/yg931nr6687. Map political location: Santa Barbara County, California Compilation scale: 1:24,000 Base maps used are hillshades generated from IfSAR, LiDAR, and multibeam mapping both onshore and offshore (see sheet 2, SIM 3319, for more information). References Cited: Fisher, M.A., Sorlien, C.C., and Sliter, R.W., 2009, Potential earthquake faults offshore southern California from the eastern Santa Barbara channel to Dana Point, in Lee, H.J., and Normark, W.R., eds., 2009, Earth science in the urban ocean: The Southern California Continental Borderland: Geological Society of America Special Paper 454, p. 271-290. Jackson, P.A., and Yeats, R.S., 1982, Sructural evolution of Carpinteria basin, western Tranverse Ranges, California: American Association of Petroleum Geologists Bulletin, v. 66, p. 805-829. Larson, K.M., and Webb, F.H., 1992, Deformation in the Santa Barbara Channel from GPS measurements 1987-1991: Geophysical News Letters, v. 19, p. 1491-1494. Sorlien, C.C., Gratier, J.P., Luyendyk, B.P., Hornafius, J.S., and Hopps, T.E., 2000, Map restoration of folded and faulted late Cenozoic strata across the Oak Ridge fault, onshore and offshore Ventura basin, California: Geological Society of America Bulletin, v. 112, p. 1080-1090. This layer is presented in the WGS84 coordinate system for web display purposes. Downloadable data are provided in native coordinate system or projection.

  4. Title: Geology: Offshore of Refugio Beach, California, 2012

    Contributors:

    Summary: This polygon shapefile contains geological features for the offshore area of Refugio Beach, California. The offshore Refugio Beach map area largely consists of a gently offshore-dipping (<1 degree) shelf (10 to ~ 90 m) underlain by sediments derived primarily from relatively small coastal watersheds draining the Santa Ynez Mountains. Nearshore and shelf deposits are primarily sand (Qms) at depths less than about 45 m and more fine-grained sediment - very fine sand, silt and clay (Qmsf), at depths greater than about 45 m. The boundary between Qms and Qmsf is based on observations and extrapolation from sediment sampling (for example, Reid and others, 2006) and camera groundtruthing. The Qms-Qmsf boundary is transitional and approximate, expected to shift based on seasonal to annual to decadal scale cycles in wave climate, sediment supply, and sediment transport. Fine-grained deposits similar to Qmsf also occur below the shelfbreak on the upper slope at water depths greater than 90 m, where they are broken out as a separate unit (Qmsl) based on their location and geomorphology. More coarse-grained deposits recognized on the basis of high backscatter and in some cases moderate seafloor relief have two modes of occurrence. In the relative nearshore (10 to 30 m water depth), coarse-grained strata (Qmsc) underlie laterally coalescing and discontinuous bars at the mouths of steep coastal watersheds. Coarser-grained sediments also form several distinct lobes (Qmscl) in water depths of 25 to 70 m, about 600 to 3,000 m offshore. The lobes range in size from ~100,000 m2 to ~1.5 km2 and are mapped on the basis of high backscatter and subtle positive seafloor relief. These coarse-grained strata were clearly derived from fluvial point sources in the adjacent, steep Santa Ynez Mountains. Bedrock exposures in the nearshore west of El Capitan are assigned to the Miocene Monterey Formation based on proximity to coastal outcrops mapped by Dibblee (1981a, b). Much of the outer shelf (water depths greater than 70 m) is also underlain by undifferentiated Tertiary bedrock (Tbu). Based on the regional cross sections constrained by deep seismic-reflection data and borehole logs (Heck, 1998; Tennyson and Kropp, 1998; Forman and Redin, 2005; Redin, 2005) and high-resolution seismic-reflection data coupled with proprietary oil industry dartcore data (Ashley, 1977), these outer-shelf outcrops consist of the Miocene Sisquoc Formation and the Pliocene Repetto and Pico Formations. These rocks have been uplifted in a large, warped, regional south-dipping homocline that formed above the blind, north-dipping North Channel fault. The fault tip is inferred at about 1.5 sec TWT (~2 km) about 6 to 7 km offshore, beneath the slope and just outside California's State Waters. Bedrock that underlies some parts of the shelf is overlain by a thin (< 1 m?) sediment veneer, recognized based on high backscatter, flat relief, continuity with moderate to high relief bedrock outcrops, and (in some cases) high-resolution, seismic-reflection data (Qms/Qtbu. Qms/Tbu, Qms/Tm). These sediment layers are likely ephemeral - they may or may not be present based on storms, seasonal/annual patterns of sediment movement, or longer-term climate cycles. This area has a long history of petroleum production (Barnum, 1998), and grouped to solitary pockmarks (Qmp) caused by gas seeps are common features in the offshore Refugio map area. Shell discovered the Molino gas field in 1962, 4 km offshore in the southwest part of the map area. Production, by onshore directional drilling of an anticlinal trap, has been underway since the 1960's (Galloway, 1998). A map that show these data are published in Scientific Investigations Map 3319, "California State Waters Map Series--Offshore of Refugio Beach, California." This layer is part of USGS Data Series 781. In 2007, the California Ocean Protection Council initiated the California Seafloor Mapping Program (CSMP) to create a comprehensive seafloor map of high-resolution bathymetry, marine benthic habitats and geology within the 3-nautical-mile limit of California's State Waters. CSMP has divided coastal California into 110 map blocks, each to be published individually as United States Geological Survey Open-File Reports (OFRs) or Scientific Investigations Maps (SIMs) at a scale of 1:24,000. Maps display seafloor morphology and character, identify potential marine benthic habitats and illustrate both the seafloor geology and shallow (to about 100 m) subsurface geology. Data layers for bathymetry, bathymetric contours, acoustic backscatter, seafloor character, potential benthic habitat and offshore geology were created for each map block, as well as regional-scale data layers for sediment thickness, depth to transition, transgressive contours, isopachs, predicted distributions of benthic macro-invertebrates and visual observations of benthic habitat from video cruises over the entire state. This coverage can be used to to aid in assessments and mitigation of geologic hazards in the coastal region and to provide sufficient geologic information for land-use and land-management decisions both onshore and offshore. These data are intended for science researchers, students, policy makers, and the general public. This information is not intended for navigational purposes.The data can be used with geographic information systems (GIS) software to display geologic and oceanographic information. Conrad, J.E., Ritchie, A.C., Johnson, S.Y. (2015). Geology: Offshore of Refugio Beach, California, 2012. California State Waters Map Series Data Catalog: U.S. Geological Survey Data Series 781. Available at: http://purl.stanford.edu/pp901rg4093. Map political location: Santa Barbara County, California Compilation scale: 1:24,000 Base maps used are hillshades generated from IfSAR, LiDAR, and multibeam mapping both onshore and offshore (see sheet 2, SIM 3319 for more information). ). References cited: Ashley, R.J., Berry, R.W., and Fischer, P.J., 1977, Offshore geology and sediment distribution of the El Capitan-Gaviota continental shelf, northern Santa Barbara Channel, California: Journal of Sedimentary Petrology, v. 47, no, 1, p. 199-208. Barnum, H.P., 1998, Redevelopment of the western portion of the Rincon offshore oil field, Ventura, California, in Kunitomi, D.S., Hopps, T.E., and Galloway, J.M., eds., Structure and petroleum geology, Santa Barbara Channel, California: American Association of Petroleum Geologists, p. 201â215. Dibblee, T.W., Jr., 1981a, Geologic map of the Tajiquas Quadrangle, California: U.S. Geological Survey Open-File Report 81-371, 1:24,000. Dibblee, T.W., Jr., 1981b, Geologic map of the Gaviota Quadrangle, California: U.S. Geological Survey Open-File Report 81-374, 1:24,000. Dibblee, T.W., Jr., 1981c, Geologic map of the Santa Ynez Quadrangle, California: U.S. Geological Survey Open-File Report 81-371, 1:24,000. Dibblee, T.W., Jr., 1981d, Geologic map of the Solvang Quadrangle, California: U.S. Geological Survey Open-File Report 81-372, 1:24,000. Forman, J., and Redin, T., 2005, Santa Barbara Channel structure and correlation sections, Correlation Section no 37, Arroyo Hondo, Gaviota Quadrangle, Santa Ynez Mts. To North West Santa Rosa Island: American Association of Petroleum Geologists, Pacific Section, Publication CS 37, 1 sheet. Galloway, J.M., 1998, Chronology of petroleum exploration and development in the Santa Barbara channel area, offshore southern California, in Kunitomi, D.S., Hopps, T.E., and Galloway, J.M., eds., Structure and petroleum geology, Santa Barbara Channel, California: American Association of Petroleum Geologists, Pacific Section and Coast Geological Society, Miscellaneous Publication 46, p. 1â12, 1 sheet. Heck, R.G., 1998, Santa Barbara Channel Regional Formline Map, Top Monterey Formation, in Kunitomi, D.S., Hopps, T.E., and Galloway, J.M., 1998, Structure and Petroleum Geology, Santa Barbara Channel, California: American Association of Petroleum Geologists, Pacific Section, Miscellaneous Publication 46, Plate 1. Minor, S.A., Kellogg, K.S., Stanley, R.G., Gurrola, L.D., Keller, E.A., and Brandt, T.R., 2009, Geologic map of the Santa Barbara coastal plain area, Santa Barbara County, California: U.S. Geological Survey Scientific Investigations Map 3001, scale 1:25,000. Redin, T., 2005, Santa Barbara Channel structure and correlation sections, Correlation Section no 36, N-S structure and correlation section, western Santa Ynez Mountains across the Santa Barbara channel to Santa Rosa Island: American Association of Petroleum Geologists, Pacific Section, Publication CS 35, 1 sheet. Reid, J.A., Reid, J.M., Jenkins, C.J., Zimmerman, M., Williams, S.J., and Field, M.E., 2006,usSEABED:Pacific Coast (California Oregon, Washington) offshore surficial-sediment data release: U.S. Geological Survey Data Series 182, http://pubs.usgs.gov/ds/2006/182/. Tennyson, M.E., and Kropp, A.P., 1998, Regional cross section across Santa Barbara channel from northwestern Santa Rosa Island to Canada de Molina, in Kunitomi, D.S., Hopps, T.E., and Galloway, J.M., eds., in Structure and petroleum geology, Santa Barbara Channel, California: American Association of Petroleum Geologists, Pacific Section and Coast Geological Society, Miscellaneous Publication 46, 1 plate. This layer is presented in the WGS84 coordinate system for web display purposes. Downloadable data are provided in native coordinate system or projection.

  5. Title: Contours (10m): Offshore of Coal Oil Point, California, 2012

    Contributors:

    Summary: This line shapefile contains bathymetric contours at 10-meter intervals for the offshore area of Coal Oil Point, California. These data were generated from data collected by California State University, Monterey Bay, Seafloor Mapping Lab (CSUMB), by the U.S. Geological Survey (USGS) and by Fugro Pelagos. A map which shows these data is published in Scientific Investigations Map 3302, "California State Waters Map Series--Offshore of Coal Oil Point, California." This layer is part of USGS Data Series 781. In 2007, the California Ocean Protection Council initiated the California Seafloor Mapping Program (CSMP) to create a comprehensive seafloor map of high-resolution bathymetry, marine benthic habitats and geology within the 3-nautical-mile limit of California's State Waters. CSMP has divided coastal California into 110 map blocks, each to be published individually as United States Geological Survey Open-File Reports (OFRs) or Scientific Investigations Maps (SIMs) at a scale of 1:24,000. Maps display seafloor morphology and character, identify potential marine benthic habitats and illustrate both the seafloor geology and shallow (to about 100 m) subsurface geology. Data layers for bathymetry, bathymetric contours, acoustic backscatter, seafloor character, potential benthic habitat and offshore geology were created for each map block, as well as regional-scale data layers for sediment thickness, depth to transition, transgressive contours, isopachs, predicted distributions of benthic macro-invertebrates and visual observations of benthic habitat from video cruises over the entire state. These data are intended for science researchers, students, policy makers, and the general public. This information is not intended for navigational purposes.The data can be used with geographic information systems (GIS) software to display geologic and oceanographic information. U.S. Geological Survey. (2013). Contours (10m): Offshore of Coal Oil Point, California, 2012. California State Waters Map Series Data Catalog: U.S. Geological Survey Data Series 781. Available at: http://purl.stanford.edu/yr944jr8118. This layer is presented in the WGS84 coordinate system for web display purposes. Downloadable data are provided in native coordinate system or projection.

  6. Title: Faults: Offshore of Coal Oil Point, California, 2014

    Contributors:

    Summary: This line shapefile contains fault lines for the offshore area of Coal Oil Point, California. This map area is in the Ventura Basin, in the southern part of the Western Transverse Ranges geologic province, which is north of the California Continental Borderland (Fisher and others, 2009). Significant clockwise rotation--at least 90 degrees--since the early Miocene has been proposed for the Western Transverse Ranges province (Luyendyk and others, 1980; Hornafius and others, 1986; Nicholson and others, 1994), and this region is presently undergoing north-south shortening (see, for example, Larson and Webb, 1992). In the eastern part of the map area, cross sections suggest that this shortening is, in part, accommodated by offset on the North Channel, Red Mountain, South Ellwood, and More Creek Fault systems (Bartlett, 1998; Heck, 1998; Redin and others, 2005; Leifer and others, 2010). Crustal deformation in the western part of the Offshore of Coal Oil Point map area apparently is less complex than that in the eastern part (Redin, 2005); the western structure is dominated by a large, south-dipping homocline that extends from the south flank of the Santa Ynez Mountains beneath the continental shelf. A map which shows these data is published in Scientific Investigations Map 3302, "California State Waters Map Series--Offshore of Coal Oil Point, California." This layer is part of USGS Data Series 781. In 2007, the California Ocean Protection Council initiated the California Seafloor Mapping Program (CSMP) to create a comprehensive seafloor map of high-resolution bathymetry, marine benthic habitats and geology within the 3-nautical-mile limit of California's State Waters. CSMP has divided coastal California into 110 map blocks, each to be published individually as United States Geological Survey Open-File Reports (OFRs) or Scientific Investigations Maps (SIMs) at a scale of 1:24,000. Maps display seafloor morphology and character, identify potential marine benthic habitats and illustrate both the seafloor geology and shallow (to about 100 m) subsurface geology. Data layers for bathymetry, bathymetric contours, acoustic backscatter, seafloor character, potential benthic habitat and offshore geology were created for each map block, as well as regional-scale data layers for sediment thickness, depth to transition, transgressive contours, isopachs, predicted distributions of benthic macro-invertebrates and visual observations of benthic habitat from video cruises over the entire state. These data are intended for science researchers, students, policy makers, and the general public. This information is not intended for navigational purposes.The data can be used with geographic information systems (GIS) software to display geologic and oceanographic information. Additionally, this coverage can provide a geologic map for the public and geoscience community to aid in assessments and mitigation of geologic hazards in the coastal region and sufficient geologic information for land-use and land-management decisions both onshore and offshore. U.S. Geological Survey. (2013). Faults: Offshore of Coal Oil Point, California, 2014. California State Waters Map Series Data Catalog: U.S. Geological Survey Data Series 781. Available at: http://purl.stanford.edu/cy701ps4209. Map political location: Santa Barbara County, California Compilation scale: 1:24,000 Base maps used are hillshades generated from IfSAR, LiDAR, and multibeam mapping both onshore and offshore (see sheet 2, SIM 3302, for more information). References Cited: Bartlett, W.L., 1998, Ellwood oil field, Santa Barbara County, California, in Kunitomi, D.S., Hopps, T.E., and Galloway, J.M., eds., Structure and petroleum geology, Santa Barbara Channel, California: American Association of Petroleum Geologists, Pacific Section, and Coast Geological Society, Miscellaneous Publication 46, p. 217-237. Fisher, M.A., Sorlien, C.C., and Sliter, R.W., 2009, Potential earthquake faults offshore southern California from the eastern Santa Barbara channel to Dana Point, in Lee, H.J., and Normark, W.R., eds., Earth science in the urban ocean--The Southern California Continental Borderland: Geological Society of America Special Paper 454, p. 271-290. Heck, R.G., 1998, Santa Barbara Channel regional formline map, top Monterey Formation, in Kunitomi, D.S., Hopps, T.E., and Galloway, J.M., eds., Structure and petroleum geology, Santa Barbara Channel, California: American Association of Petroleum Geologists, Pacific Section, and Coast Geological Society, Miscellaneous Publication 46, 1 plate. Hornafius, J.S., Luyendyk, B.P., Terres, R.R., and Kamerling, M.J., 1986, Timing and extent of Neogene rotation in the western Transverse Ranges, California: Geological Society of America Bulletin, v. 97, p. 1,476-1,487. Larson, K.M., and Webb, F.H., 1992, Deformation in the Santa Barbara Channel from GPS measurements 1987-1991: Geophysical News Letters, v. 19, p. 1,491-1,494. Leifer, I., Kamerling, M., Luyendyk, B.P., and Wilson, D.S., 2010, Geologic control of natural marine hydrocarbon seep emissions, Coal Oil Point seep field, California: Geo-Marine Letters, v. 30, p. 331-338, doi:10.1007/s00367-010-0188-9. Luyendyk, B.P., Kamerling, M.J., and Terres, R.R., 1980, Geometric model for Neogene crustal rotations in southern California: Geological Society of America Bulletin, v. 91, p. 211-217. Nicholson, C., Sorlien, C., Atwater, T., Crowell, J.C., and Luyendyk, B.P., 1994, Microplate capture, rotation of the western Transverse Ranges, and initiation of the San Andreas transform as a low-angle fault system: Geology, v. 22, p. 491-495. Redin, T., 2005, Santa Barbara Channel structure and correlation sections--Correlation Section no. 36, N-S structure and correlation section, western Santa Ynez Mountains across the Santa Barbara Channel to Santa Rosa Island: American Association of Petroleum Geologists, Pacific Section, Publication CS 36, 1 sheet. Redin, T., Kamerling, M., and Forman, J., 2005, Santa Barbara Channel structure and correlation sections--Correlation Section no. 35, North Ellwood-Coal Oil Point area across the Santa Barbara Channel to the north coast of Santa Cruz Island: American Association of Petroleum Geologists, Pacific Section, Publication CS 35, 1 sheet. This layer is presented in the WGS84 coordinate system for web display purposes. Downloadable data are provided in native coordinate system or projection.

  7. Title: Folds: Offshore of Coal Oil Point, California, 2014

    Contributors:

    Summary: This line shapefile contains geologic folds for the offshore area of Coal Oil Point, California. This map area is in the Ventura Basin, in the southern part of the Western Transverse Ranges geologic province, which is north of the California Continental Borderland (Fisher and others, 2009). Significant clockwise rotation--at least 90 degrees--since the Miocene has been proposed for the Western Transverse Ranges province (Luyendyk and others, 1980; Hornafius and others, 1986; Nicholson and others, 1994), and this region is presently undergoing north-south shortening (see, for example, Larson and Webb, 1992). In the eastern part of the map area, cross sections suggest that this shortening is, in part, accommodated by offset on the North Channel, Red Mountain, South Ellwood, and More Creek Fault systems (Bartlett, 1998; Heck, 1998; Redin and others, 2005; Leifer and others, 2010). Crustal deformation in the western part of the Offshore of Coal Oil Point map area apparently is less complex than that in the eastern part (Redin, 2005); the western structure is dominated by a large, south-dipping homocline that extends from the south flank of the Santa Ynez Mountains beneath the continental shelf. A map which shows these data is published in Scientific Investigations Map 3302, "California State Waters Map Series--Offshore of Coal Oil Point, California." This layer is part of USGS Data Series 781. In 2007, the California Ocean Protection Council initiated the California Seafloor Mapping Program (CSMP) to create a comprehensive seafloor map of high-resolution bathymetry, marine benthic habitats and geology within the 3-nautical-mile limit of California's State Waters. CSMP has divided coastal California into 110 map blocks, each to be published individually as United States Geological Survey Open-File Reports (OFRs) or Scientific Investigations Maps (SIMs) at a scale of 1:24,000. Maps display seafloor morphology and character, identify potential marine benthic habitats and illustrate both the seafloor geology and shallow (to about 100 m) subsurface geology. Data layers for bathymetry, bathymetric contours, acoustic backscatter, seafloor character, potential benthic habitat and offshore geology were created for each map block, as well as regional-scale data layers for sediment thickness, depth to transition, transgressive contours, isopachs, predicted distributions of benthic macro-invertebrates and visual observations of benthic habitat from video cruises over the entire state. These data are intended for science researchers, students, policy makers, and the general public. This information is not intended for navigational purposes.The data can be used with geographic information systems (GIS) software to display geologic and oceanographic information. Additionally, this coverage can provide a geologic map for the public and geoscience community to aid in assessments and mitigation of geologic hazards in the coastal region and sufficient geologic information for land-use and land-management decisions both onshore and offshore. U.S. Geological Survey. (2013). Folds: Offshore of Coal Oil Point, California, 2014. California State Waters Map Series Data Catalog: U.S. Geological Survey Data Series 781. Available at: http://purl.stanford.edu/mp060wb2896. Map political location: Santa Barbara County, California Compilation scale: 1:24,000 Base maps used are hillshades generated from IfSAR, LiDAR, and multibeam mapping both onshore and offshore (see sheet 2, SIM 3302 for more information). References Cited: Bartlett, W.L., 1998, Ellwood oil field, Santa Barbara County, California, in Kunitomi, D.S., Hopps, T.E., and Galloway, J.M., eds., Structure and petroleum geology, Santa Barbara Channel, California: American Association of Petroleum Geologists, Pacific Section, and Coast Geological Society, Miscellaneous Publication 46, p. 217-237. Fisher, M.A., Sorlien, C.C., and Sliter, R.W., 2009, Potential earthquake faults offshore southern California from the eastern Santa Barbara channel to Dana Point, in Lee, H.J., and Normark, W.R., eds., Earth science in the urban ocean--The Southern California Continental Borderland: Geological Society of America Special Paper 454, p. 271-290. Heck, R.G., 1998, Santa Barbara Channel regional formline map, top Monterey Formation, in Kunitomi, D.S., Hopps, T.E., and Galloway, J.M., eds., Structure and petroleum geology, Santa Barbara Channel, California: American Association of Petroleum Geologists, Pacific Section, and Coast Geological Society, Miscellaneous Publication 46, 1 plate. Hornafius, J.S., Luyendyk, B.P., Terres, R.R., and Kamerling, M.J., 1986, Timing and extent of Neogene rotation in the western Transverse Ranges, California: Geological Society of America Bulletin, v. 97, p. 1,476-1,487. Larson, K.M., and Webb, F.H., 1992, Deformation in the Santa Barbara Channel from GPS measurements 1987-1991: Geophysical News Letters, v. 19, p. 1,491-1,494. Leifer, I., Kamerling, M., Luyendyk, B.P., and Wilson, D.S., 2010, Geologic control of natural marine hydrocarbon seep emissions, Coal Oil Point seep field, California: Geo-Marine Letters, v. 30, p. 331-338, doi:10.1007/s00367-010-0188-9. Luyendyk, B.P., Kamerling, M.J., and Terres, R.R., 1980, Geometric model for Neogene crustal rotations in southern California: Geological Society of America Bulletin, v. 91, p. 211-217. Nicholson, C., Sorlien, C., Atwater, T., Crowell, J.C., and Luyendyk, B.P., 1994, Microplate capture, rotation of the western Transverse Ranges, and initiation of the San Andreas transform as a low-angle fault system: Geology, v. 22, p. 491-495. Redin, T., 2005, Santa Barbara Channel structure and correlation sections--Correlation Section no. 36, N-S structure and correlation section, western Santa Ynez Mountains across the Santa Barbara Channel to Santa Rosa Island: American Association of Petroleum Geologists, Pacific Section, Publication CS 36, 1 sheet. Redin, T., Kamerling, M., and Forman, J., 2005, Santa Barbara Channel structure and correlation sections--Correlation Section no. 35, North Ellwood-Coal Oil Point area across the Santa Barbara Channel to the north coast of Santa Cruz Island: American Association of Petroleum Geologists, Pacific Section, Publication CS 35, 1 sheet. This layer is presented in the WGS84 coordinate system for web display purposes. Downloadable data are provided in native coordinate system or projection.

  8. Title: Geology: Offshore of Coal Oil Point, California, 2014

    Contributors:

    Summary: This polygon shapefile contains geologic features within the offshore area of Coal Oil Point, California. The offshore part of the Offshore of Coal Oil Point map area largely consists of a gently offshore-dipping (less than 1 degree) shelf underlain by sediments derived primarily from relatively small coastal watersheds that drain the Santa Ynez Mountains. Shelf deposits are primarily sand (Qms) at depths less than about 35 to 50 m, and they are finer grained sediment such as very fine sand, silt, and clay (Qmsf) from depths of 35 to 50 m southward to the shelf break at a depth of about 90 m. The boundary between units Qms and Qmsf is based on observations and extrapolation from sediment sampling (see, for example, Reid and others, 2006) and camera ground-truth surveying. It is important to note that the boundary between units Qms and Qmsf should be considered transitional and approximate and is expected to shift as a result of seasonal- to annual- to decadal-scale cycles in wave climate, sediment supply, and sediment transport. Fine-grained deposits that are similar to unit Qmsf also are mapped at water depths greater than 90 m, below the shelf break on the upper slope; however, here they are identified as a separate unit (unit Qmsl) because of their location below the distinct shelf-slope geomorphologic break. Coarser grained, marine deposits (coarse sand to boulders) of units Qmsc, Qmscl, and Qsc are recognized on the basis of their high acoustic backscatter, their ground-truth-survey imagery, and, in some cases, their moderate seafloor relief. This coarse-grained facies is linked either to the mouths of steep coastal watersheds or to adjacent seafloor bedrock outcrops, and the deposits generally represent wave-winnowed lags of deltaic sediment. Two distinct lobes of coarse-grained sediment (unit Qmscl), present in deeper water (about 50 m) near the west edge of the map area, may similarly represent winnowed deltaic deposits that formed at lower sea levels during the latest Pleistocene or early Holocene. An isolated patch of clast-supported cobbles (unit Qsc), which rests on bedrock south of Coal Oil Point at a water depth of 70 m, also may have been deposited at lower sea levels during the late Pleistocene. Offshore bedrock exposures are mapped as either the Miocene Monterey Formation (Tm, Tmu, Tmm), the late Miocene and early Pliocene Sisquoc Formation (Tsq), or the undivided Quaternary and Tertiary bedrock (QTbu) or undivided Tertiary bedrock (Tbu) units on the basis of the confidence in extending the onshore mapping of Minor and others (2009) offshore. Midshelf to outer shelf bedrock exposures are all mapped as undivided units; however, offshore sampling data (see, for example, Kunitomi and others, 1998), as well as regional cross sections that are constrained by petroleum exploration data and sampling (Redin, 2005; Redin and others, 2005), have suggested that these seafloor outcrops predominantly are late Miocene and Pliocene strata. These rocks have been uplifted in a large, regional, internally warped, south-dipping homocline that formed above the blind, north-dipping Pitas Point-North Channel Fault system; the fault tip is inferred to lie beneath the continental slope, about 6 to 7 km offshore. Bedrock is, in some places, overlain by a thin (less than 1 m?) veneer of sediment, recognized on the basis of high backscatter, flat relief, continuity with moderate- to high-relief bedrock outcrops, and (in some cases) high-resolution seismic-reflection data; these areas, which are mapped as composite units Qms/Tu, Qms/Tsq, Qms/Tmu, Qms/Tmm, Qms/Tm, Qms/Tbu, or Qmsf/QTbu, are interpreted as ephemeral sediment layers that may or may not be continuously present, whose presence or absence is a function of the recency and intensity of storm events, seasonal and (or) annual patterns of sediment movement, or longer term climate cycles. The Offshore of Coal Oil Point map area includes the upper part of the large (130 km2), well-documented submarine Goleta landslide complex (Eichhubl and others, 2002; Fisher and others, 2005; Greene and others, 2006). Greene and others (2006) reported that the complex, which measures 14.6 km long and 10.5 km wide and extends from water depths of 90 to 574 m, has displaced about 1.75 km3 of landslide debris during the Holocene; they described it as a compound, multiphase submarine landslide that contains both surficial slump blocks and mud flows, in three distinct segments (west, central, and east lobes). Each segment consists of a distinct headwall scarp (units Qglwh, Qglch, Qgleh), a downdropped head block (units Qglwb, Qglcb, Qgleb), and several composite slide-debris lobes (units Qglw5, Qfglw4, Qglw3, Qglw2, Qglw1, Qglc4, Qglc3, Qglc2a, Qglc2, Qfle5, Qgle4, Qgle3, Qgle2). The geologic map geomorphic map on sheet 10 (SIM 3302) shows the upper approximately 3 km of this landslide complex; in addition, the seismic-reflection profile SB-145 (fig. 3 on sheet 8, SIM 3302), which crosses the east lobe of the landslide complex, illustrates its subsurface characteristics. The landslide source is inferred to be Pleistocene-age, shelf-edge deltaic sediments deposited during Quaternary sea-level lowstands, and Fisher and others (2005) suggested that the youngest landslides formed about 8,000 to 10,000 years ago. The Santa Barbara Channel region, including the map area, has a long history of petroleum production (Barnum, 1998) that began in 1928 with discovery of the Ellwood oil field. Subsequent discoveries in the offshore part of the map area include the South Ellwood offshore oil field, the Coal Oil Point oil field, and the Naples oil and gas field (Brickey, 1998; Galloway, 1998). Oil and gas are mainly sourced by the Miocene Monterey Formation; the reservoirs are in the Vaqueros Formation, the Rincon Shale, and the Monterey Formation. Development of the South Ellwood offshore oil field began in 1966 from platform "Holly," which was the last platform to be installed in California's State Waters. Debris and infrastructure associated with platform "Holly," as well as with seep containment devices ("seep tents"), are mapped as unit pd. Hornafius and others (1999) described "the world's most spectacular marine hydrocarbon seeps" in the Coal Oil Point map area, and these seeps release an estimated 36 metric tons of methane and 17 metric tons reactive organic gas (ethane, propane, butane, and higher hydrocarbons) per day. Areas of grouped to solitary pockmarks (unit Qmp) caused by gas seeps are common features. In addition, numerous asphalt (tar) deposits (unit Qas) associated with hydrocarbon seeps and gas vents are mapped both onshore and offshore. The offshore deposits, which have been confirmed with seafloor video observations, often are localized along bedrock structures such as faults or the crests of anticlines, forming bathymetric features that are morphologically similar to bedrock outcrops but are distinguished from them on the basis of their low acoustic backscatter. Although many such asphalt deposits are too small to be shown on the map, the larger deposits can cover as much as several hundred square meters. A map which shows these data is published in Scientific Investigations Map 3302, "California State Waters Map Series--Offshore of Coal Oil Point, California." This layer is part of USGS Data Series 781. In 2007, the California Ocean Protection Council initiated the California Seafloor Mapping Program (CSMP) to create a comprehensive seafloor map of high-resolution bathymetry, marine benthic habitats and geology within the 3-nautical-mile limit of California's State Waters. CSMP has divided coastal California into 110 map blocks, each to be published individually as United States Geological Survey Open-File Reports (OFRs) or Scientific Investigations Maps (SIMs) at a scale of 1:24,000. Maps display seafloor morphology and character, identify potential marine benthic habitats and illustrate both the seafloor geology and shallow (to about 100 m) subsurface geology. Data layers for bathymetry, bathymetric contours, acoustic backscatter, seafloor character, potential benthic habitat and offshore geology were created for each map block, as well as regional-scale data layers for sediment thickness, depth to transition, transgressive contours, isopachs, predicted distributions of benthic macro-invertebrates and visual observations of benthic habitat from video cruises over the entire state. These data are intended for science researchers, students, policy makers, and the general public. This information is not intended for navigational purposes.The data can be used with geographic information systems (GIS) software to display geologic and oceanographic information. Additionally, this coverage can provide a geologic map for the public and geoscience community to aid in assessments and mitigation of geologic hazards in the coastal region and sufficient geologic information for land-use and land-management decisions both onshore and offshore. This information is not intended for navigational purposes. U.S. Geological Survey. (2013). Geology: Offshore of Coal Oil Point, California, 2014. California State Waters Map Series Data Catalog: U.S. Geological Survey Data Series 781. Available at: http://purl.stanford.edu/wk279yk4945. Map political location: Santa Barbara County, California Compilation scale: 1:24,000 Base maps used are hillshades generated from IfSAR, LiDAR, and multibeam mapping both onshore and offshore (see sheet 2, SIM 3302, for more information). References Cited: Barnum, H.P., 1998, Redevelopment of the western portion of the Rincon offshore oil field, Ventura, California, in Kunitomi, D.S., Hopps, T.E., and Galloway, J.M., eds., Structure and petroleum geology, Santa Barbara Channel, California: American Association of Petroleum Geologists, Pacific Section, and Coast Geological Society, Miscellaneous Publication 46, p. 201-215. Brickey, M.R., 1998, Oil and gas fields of the Santa Barbara Channel area, in Kunitomi, D.S., Hopps, T.E., and Galloway, J.M., eds., Structure and petroleum geology, Santa Barbara Channel, California: American Association of Petroleum Geologists, Pacific Section, and Coast Geological Society, Miscellaneous Publication 46, preface (2 p.). Eichhubl, P., Greene, H.G., and Maher, N., 2002, Physiography of an active transpressive margin basin--High-resolution bathymetry of the Santa Barbara basin, southern California continental borderland: Marine Geology, v. 184, p. 95-120. Fisher, M.A., Normark, W.R., Greene, H.G., Lee, H.J., and Sliter, R.W., 2005, Geology and tsunamigenic potential of submarine landslides in Santa Barbara Channel, southern California: Marine Geology, v. 224, p. 1-22. Galloway, J., 1998, Chronology of petroleum exploration and development in the Santa Barbara Channel area, offshore southern California, in Kunitomi, D.S., Hopps, T.E., and Galloway, J.M., eds., Structure and petroleum geology, Santa Barbara Channel, California: American Association of Petroleum Geologists, Pacific Section, and Coast Geological Society, Miscellaneous Publication 46, p. 1-12, 1 sheet. Greene, H.G., Murai, L.Y., Watts, P., Maher, N.A., Fisher, M.A., and Eichhubl, P., 2006, Submarine landslides in the Santa Barbara channel as potential tsunami sources: Natural Hazards and Earth System Sciences, v. 6, p. 63-88. Hornafius, J.S., Quigley, D.C., and Luyendyk, B.P., 1999, The world's most spectacular marine hydrocarbon seeps (Coal Oil Point, Santa Barbara Channel, California)--Quantification of emissions: Journal of Geophysical Research - Oceans, v. 104, p. 20,703-20,711. Kunitomi, D.S., Hopps, T.E., and Galloway, J.M., eds., 1998, Structure and petroleum geology, Santa Barbara Channel, California: American Association of Petroleum Geologists, Pacific Section, and Coast Geological Society, Miscellaneous Publication 46, 328 p. Minor, S.A., Kellogg, K.S., Stanley, R.G., Gurrola, L.D., Keller, E.A., and Brandt, T.R., 2009, Geologic map of the Santa Barbara coastal plain area, Santa Barbara County, California: U.S. Geological Survey Scientific Investigations Map 3001, scale 1:25,000, 1 sheet, pamphlet 38 p., available at http://pubs.usgs.gov/sim/3001. Redin, T., 2005, Santa Barbara Channel structure and correlation sections--Correlation Section no. 36, N-S structure and correlation section, western Santa Ynez Mountains across the Santa Barbara Channel to Santa Rosa Island: American Association of Petroleum Geologists, Pacific Section, Publication CS 36, 1 sheet. Redin, T., Kamerling, M., and Forman, J., 2005, Santa Barbara Channel structure and correlation sections--Correlation Section no. 35, North Ellwood-Coal Oil Point area across the Santa Barbara Channel to the north coast of Santa Cruz Island: American Association of Petroleum Geologists, Pacific Section, Publication CS 35, 1 sheet. Reid, J.A., Reid, J.M., Jenkins, C.J., Zimmerman, M., Williams, S.J., and Field, M.E., 2006, usSEABED--Pacific Coast (California, Oregon, Washington) offshore surficial-sediment data release: U.S. Geological Survey Data Series 182, available at http://pubs.usgs.gov/ds/2006/182/. This layer is presented in the WGS84 coordinate system for web display purposes. Downloadable data are provided in native coordinate system or projection.

  9. Title: Faults: Offshore of Ventura, California, 2013

    Contributors:

    Summary: This line shapefile depicts fault lines within the offshore area of Ventura, California. This layer was generated from bathymetry data collected by Fugro Pelagos and California State University, Monterey Bay, Seafloor Mapping Lab (CSUMB) and by the U.S. Geological Survey. The map area is in the Ventura Basin, in the southern part of the Western Transverse Ranges geologic province, which is north of the California Continental Borderland (Fisher and others, 2009). This province has undergone significant north-south compression since the Miocene, and recent GPS data suggest north-south shortening of about 6 to 10 mm/yr (Larson and Webb, 1992; Donnellan and others, 1993). The active, north-verging Oak Ridge Fault and the south-verging Pitas Point-Ventura Fault are two of the structures on which this shortening occurs (for example, Sorlien and others, 2000; Fisher and others, 2005, 2009). High-resolution seismic-reflection profiles (sheet 8, SIM 3254) reveal that neither fault ruptures the surface; instead, the surface expression of each fault is a narrow, asymmetric fold that involves the uppermost Pleistocene and Holocene (less than 21 ka) sedimentary section. Both structures are inferred to be parts of long fault systems that extend for more than 100 km, representing important potential earthquake hazards (for example, Fisher and others, 2009). Shortening is also occurring on the Montalvo Fault and Anticline system along the southeast edge of the map area (part of the broader Oak Ridge Fault Zone; Yeats, 1998) and on the Rincon-Ventura Avenue Anticline (for example, Rockwell and others, 1988), which crosses the northwest edge of the map area. The map that shows these data is published in Scientific Investigations Map 3254, "California State Waters Map Series--Offshore of Ventura, California." This layer os part of USGS Data Series 781. In 2007, the California Ocean Protection Council initiated the California Seafloor Mapping Program (CSMP) to create a comprehensive seafloor map of high-resolution bathymetry, marine benthic habitats and geology within the 3-nautical-mile limit of California's State Waters. CSMP has divided coastal California into 110 map blocks, each to be published individually as United States Geological Survey Open-File Reports (OFRs) or Scientific Investigations Maps (SIMs) at a scale of 1:24,000. Maps display seafloor morphology and character, identify potential marine benthic habitats and illustrate both the seafloor geology and shallow (to about 100 m) subsurface geology. Data layers for bathymetry, bathymetric contours, acoustic backscatter, seafloor character, potential benthic habitat and offshore geology were created for each map block, as well as regional-scale data layers for sediment thickness, depth to transition, transgressive contours, isopachs, predicted distributions of benthic macro-invertebrates and visual observations of benthic habitat from video cruises over the entire state. This coverage can be used to to aid in assessments and mitigation of geologic hazards in the coastal region and to provide sufficient geologic information for land-use and land-management decisions both onshore and offshore. These data are intended for science researchers, students, policy makers, and the general public. This information is not intended for navigational purposes.The data can be used with geographic information systems (GIS) software to display geologic and oceanographic information. U.S. Geological Survey. (2013). Faults: Offshore of Ventura, California, 2013. California State Waters Map Series Data Catalog: U.S. Geological Survey Data Series 781. Available at: http://purl.stanford.edu/wt307vg4499. Map political location: Ventura County, California Compilation scale: 1:24,000 Base maps used are hillshades generated from IfSAR, LiDAR, and multibeam mapping both onshore and offshore (see sheet 2, SIM 3254, for more information). . References Cited Donnellan, A., Hager, B.H., and King, R.W., 1993, Discrepancy between geologic and geodetic deformation rates in the Ventura basin: Nature, v. 346, p. 333?336. Fisher, M.A., Greene, H.G., Normark, W.R., and Sliter, R.W., 2005, Neotectonics of the offshore Oak Ridge fault near Ventura, southern California: Bulletin of the Seismological Society of America, v. 95, p. 739?744. Fisher, M.A., Sorlien, C.C., and Sliter, R.W., 2009, Potential earthquake faults offshore southern California from the eastern Santa Barbara channel to Dana Point, in Lee, H.J., and Normark, W.R., eds., 2009, Earth science in the urban ocean--The Southern California Continental Borderland: Geological Society of America Special Paper 454, p. 271-290. Larson, K.M., and Webb, F.H., 1992, Deformation in the Santa Barbara Channel from GPS measurements 1987-1991: Geophysical News Letters, v. 19, p. 1,491-1,494. Rockwell, T.K., Keller, E.A., and Dembroff, G.R., 1988, Quaternary rate of folding of the Ventura Avenue anticline, western Transverse Ranges, southern California: Geological Society of America Bulletin, v. 100, p. 850-858. Sorlien, C.C., Gratier, J.P., Luyendyk, B.P., Hornafius, J.S., and Hopps, T.E, 2000, Map restoration of folded and faulted late Cenozoic strata across the Oak Ridge fault, onshore and offshore Ventura basin, California: Geological Society of America Bulletin, v. 112, p. 1,080-1,090. Yeats, R.S., 1998, North-vergent thick-skinned or south-vergent thin-skinned Oak Ridge fault--A view from the coast, in Kunitomi, D.S., Hopps, T.E., and Galloway, J.M., eds., Structure and petroleum geology, Santa Barbara Channel, California: American Association of Petroleum Geologists, Pacific Section and Coast Geological Society, Miscellaneous Publication 46, p. 143-152. This layer is presented in the WGS84 coordinate system for web display purposes. Downloadable data are provided in native coordinate system or projection.

  10. Title: Folds: Offshore of Carpinteria, California, 2013

    Contributors:

    Summary: This line shapefile contains geologic folds within the offshore area of Carpinteria, California. This map area lies within the Western Transverse Ranges geologic province, which is north of the California Continental Borderland (Fisher and others, 2009). This province has undergone significant north-south compression since the Miocene, and recent GPS data suggest north-south shortening of about 6 to 10 mm/yr (Larson and Webb, 1992; Donnellan and others, 1993). The active, east-west-striking, north-dipping Pitas Point Fault (a broad zone that includes south-dipping reverse faults), Red Mountain Fault, and Rincon Creek Fault are some of the structures on which this shortening occurs (see, for example, Jackson and Yeats, 1982; Sorlien and others, 2000; Fisher and others, 2009). This fault system, in aggregate, extends for about 100 km through the Ventura and Santa Barbara Basins and represents an important earthquake hazard. These data were published in Scientific Investigations Map 3261, "California State Waters Map Series--Offshore of Carpinteria, California." This layer is part of USGS Data Series 781. In 2007, the California Ocean Protection Council initiated the California Seafloor Mapping Program (CSMP) to create a comprehensive seafloor map of high-resolution bathymetry, marine benthic habitats and geology within the 3-nautical-mile limit of California's State Waters. CSMP has divided coastal California into 110 map blocks, each to be published individually as United States Geological Survey Open-File Reports (OFRs) or Scientific Investigations Maps (SIMs) at a scale of 1:24,000. Maps display seafloor morphology and character, identify potential marine benthic habitats and illustrate both the seafloor geology and shallow (to about 100 m) subsurface geology. Data layers for bathymetry, bathymetric contours, acoustic backscatter, seafloor character, potential benthic habitat and offshore geology were created for each map block, as well as regional-scale data layers for sediment thickness, depth to transition, transgressive contours, isopachs, predicted distributions of benthic macro-invertebrates and visual observations of benthic habitat from video cruises over the entire state. These data are intended for science researchers, students, policy makers, and the general public. This information is not intended for navigational purposes.The data can be used with geographic information systems (GIS) software to display geologic and oceanographic information. Additionally, this coverage can provide a geologic map for the public and geoscience community to aid in assessments and mitigation of geologic hazards in the coastal region and sufficient geologic information for land-use and land-management decisions both onshore and offshore. This information is not intended for navigational purposes. U.S. Geological Survey. (2013). Folds: Offshore of Carpinteria, California, 2013. California State Waters Map Series Data Catalog: U.S. Geological Survey Data Series 781. Available at: http://purl.stanford.edu/cb791wp6993. Map political location: Santa Barbara and Ventura Counties, California Compilation scale: 1:24,000 Base maps used are hillshades generated from IfSAR, LiDAR, and multibeam mapping both onshore and offshore (see sheets 1 and 2, SIM 3261 for more information). ). References Cited: Donnellan, A., Hager, B.H., and King, R.W., 1993, Discrepancy between geologic and geodetic deformation rates in the Ventura basin: Nature, v. 346, p. 333-336. Fisher, M.A., Sorlien, C.C., and Sliter, R.W., 2009, Potential earthquake faults offshore southern California from the eastern Santa Barbara channel to Dana Point, in Lee, H.J., and Normark, W.R., eds., Earth science in the urban ocean--The Southern California Continental Borderland: Geological Society of America Special Paper 454, p. 271-290. Jackson, P.A., and Yeats, R.S., 1982, Structural evolution of Carpinteria basin, western Transverse Ranges, California: American Association of Petroleum Geologists Bulletin, v. 66, p. 805-829. Larson, K.M., and Webb, F.H., 1992, Deformation in the Santa Barbara Channel from GPS measurements 1987-1991: Geophysical News Letters, v. 19, p. 1,491-1,494. Sorlien, C.C., Gratier, J.P., Luyendyk, B.P., Hornafius, J.S., and Hopps, T.E., 2000, Map restoration of folded and faulted late Cenozoic strata across the Oak Ridge fault, onshore and offshore Ventura basin, California: Geological Society of America Bulletin, v. 112, p. 1,080-1,090. This layer is presented in the WGS84 coordinate system for web display purposes. Downloadable data are provided in native coordinate system or projection.

  11. Title: Faults: Offshore of Carpinteria, California, 2013

    Contributors:

    Summary: This line shapefile contains fault lines for the offshore area of Carpinteria, California. This map area lies within the Western Transverse Ranges geologic province, which is north of the California Continental Borderland (Fisher and others, 2009). This province has undergone significant north-south compression since the Miocene, and recent GPS data suggest north-south shortening of about 6 to 10 mm/yr (Larson and Webb, 1992; Donnellan and others, 1993). The active, east-west-striking, north-dipping Pitas Point Fault (a broad zone that includes south-dipping reverse faults), Red Mountain Fault, and Rincon Creek Fault are some of the structures on which this shortening occurs (see, for example, Jackson and Yeats, 1982; Sorlien and others, 2000; Fisher and others, 2009). This fault system, in aggregate, extends for about 100 km through the Ventura and Santa Barbara Basins and represents an important earthquake hazard (see, for example, Fisher and others, 2009. This layer is part of USGS Data Series 781. These data were also published in Scientific Investigations Map (SIM) 3261 (Sheets 1 & 2). In 2007, the California Ocean Protection Council initiated the California Seafloor Mapping Program (CSMP) to create a comprehensive seafloor map of high-resolution bathymetry, marine benthic habitats and geology within the 3-nautical-mile limit of California's State Waters. CSMP has divided coastal California into 110 map blocks, each to be published individually as United States Geological Survey Open-File Reports (OFRs) or Scientific Investigations Maps (SIMs) at a scale of 1:24,000. Maps display seafloor morphology and character, identify potential marine benthic habitats and illustrate both the seafloor geology and shallow (to about 100 m) subsurface geology. Data layers for bathymetry, bathymetric contours, acoustic backscatter, seafloor character, potential benthic habitat and offshore geology were created for each map block, as well as regional-scale data layers for sediment thickness, depth to transition, transgressive contours, isopachs, predicted distributions of benthic macro-invertebrates and visual observations of benthic habitat from video cruises over the entire state. These data are intended for science researchers, students, policy makers, and the general public. This information is not intended for navigational purposes.The data can be used with geographic information systems (GIS) software to display geologic and oceanographic information. Additionally, this coverage can provide a geologic map for the public and geoscience community to aid in assessments and mitigation of geologic hazards in the coastal region and sufficient geologic information for land-use and land-management decisions both onshore and offshore. This information is not intended for navigational purposes. U.S. Geological Survey. (2013). Faults: Offshore of Carpinteria, California, 2013. California State Waters Map Series Data Catalog: U.S. Geological Survey Data Series 781. Available at: http://purl.stanford.edu/ns253jf4292. Map political location: Santa Barbara and Ventura Counties, California Compilation scale: 1:24,000 Base maps used are hillshades generated from IfSAR, LiDAR, and multibeam mapping both onshore and offshore (see sheets 1 and 2, SIM 3261, for more information). ). References Cited: Donnellan, A., Hager, B.H., and King, R.W., 1993, Discrepancy between geologic and geodetic deformation rates in the Ventura basin: Nature, v. 346, p. 333-336. Fisher, M.A., Sorlien, C.C., and Sliter, R.W., 2009, Potential earthquake faults offshore southern California from the eastern Santa Barbara channel to Dana Point, in Lee, H.J., and Normark, W.R., eds., Earth science in the urban ocean--The Southern California Continental Borderland: Geological Society of America Special Paper 454, p. 271-290. Jackson, P.A., and Yeats, R.S., 1982, Structural evolution of Carpinteria basin, western Transverse Ranges, California: American Association of Petroleum Geologists Bulletin, v. 66, p. 805-829. Larson, K.M., and Webb, F.H., 1992, Deformation in the Santa Barbara Channel from GPS measurements 1987-1991: Geophysical News Letters, v. 19, p. 1,491-1,494. Sorlien, C.C., Gratier, J.P., Luyendyk, B.P., Hornafius, J.S., and Hopps, T.E., 2000, Map restoration of folded and faulted late Cenozoic strata across the Oak Ridge fault, onshore and offshore Ventura basin, California: Geological Society of America Bulletin, v. 112, p. 1,080-1,090. This layer is presented in the WGS84 coordinate system for web display purposes. Downloadable data are provided in native coordinate system or projection.

  12. Title: Folds: Offshore of Santa Barbara, California, 2013

    Contributors:

    Summary: This line shapefile depicts geological folds within the offshore area of Santa Barbara, California. This map area lies within the Western Transverse Ranges geologic province, which is north of the California Continental Borderland (Fisher and others, 2009). This province has undergone significant north-south compression since the Miocene, and recent GPS data suggest north-south shortening of about 6 mm/yr (Larson and Webb, 1992). The active, east-west-striking Pitas Point Fault (a broad zone that includes south-dipping reverse faults), Red Mountain Fault, and Rincon Creek Fault are some of the structures on which this shortening occurs (see, for example, Jackson and Yeats, 1982; Sorlien and others, 2000; Fisher and others, 2009). This fault system, in aggregate, extends for about 100 km through the Ventura and Santa Barbara Basins and represents an important earthquake hazard (see, for example, Fisher and others, 2009). A map that shows these data is published in Scientific Investigations Map 3281, "California State Waters Map Series--Offshore of Santa Barbara, California." This layer is part of USGS Data Series 781. In 2007, the California Ocean Protection Council initiated the California Seafloor Mapping Program (CSMP) to create a comprehensive seafloor map of high-resolution bathymetry, marine benthic habitats and geology within the 3-nautical-mile limit of California's State Waters. CSMP has divided coastal California into 110 map blocks, each to be published individually as United States Geological Survey Open-File Reports (OFRs) or Scientific Investigations Maps (SIMs) at a scale of 1:24,000. Maps display seafloor morphology and character, identify potential marine benthic habitats and illustrate both the seafloor geology and shallow (to about 100 m) subsurface geology. Data layers for bathymetry, bathymetric contours, acoustic backscatter, seafloor character, potential benthic habitat and offshore geology were created for each map block, as well as regional-scale data layers for sediment thickness, depth to transition, transgressive contours, isopachs, predicted distributions of benthic macro-invertebrates and visual observations of benthic habitat from video cruises over the entire state. This coverage can be used to to aid in assessments and mitigation of geologic hazards in the coastal region and to provide sufficient geologic information for land-use and land-management decisions both onshore and offshore. These data are intended for science researchers, students, policy makers, and the general public. This information is not intended for navigational purposes.The data can be used with geographic information systems (GIS) software to display geologic and oceanographic information. U.S. Geological Survey. (2013). Folds: Offshore of Santa Barbara, California, 2013. California State Waters Map Series Data Catalog: U.S. Geological Survey Data Series 781. Available at: http://purl.stanford.edu/wf450cq7724. Map political location: Santa Barbara County, California Compilation scale: 1:24,000 Base maps used are hillshades generated from IfSAR, LiDAR, and multibeam mapping both onshore and offshore (see sheet 2, SIM 3281 for more information). References Cited: Fisher, M.A., Sorlien, C.C., and Sliter, R.W., 2009, Potential earthquake faults offshore southern California from the eastern Santa Barbara channel to Dana Point, in Lee, H.J., and Normark, W.R., eds., Earth science in the urban ocean--The Southern California Continental Borderland: Geological Society of America Special Paper 454, p. 271-290. Jackson, P.A., and Yeats, R.S., 1982, Structural evolution of Carpinteria basin, western Transverse Ranges, California: American Association of Petroleum Geologists Bulletin, v. 66, p. 805-829. Larson, K.M., and Webb, F.H., 1992, Deformation in the Santa Barbara Channel from GPS measurements 1987-1991: Geophysical News Letters, v. 19, p. 1,491-1,494. Sorlien, C.C., Gratier, J.P., Luyendyk, B.P., Hornafius, J.S., and Hopps, T.E., 2000, Map restoration of folded and faulted late Cenozoic strata across the Oak Ridge fault, onshore and offshore Ventura basin, California: Geological Society of America Bulletin, v. 112, p. 1,080-1,090. This layer is presented in the WGS84 coordinate system for web display purposes. Downloadable data are provided in native coordinate system or projection.

  13. Title: Geology: Offshore of Carpinteria, California, 2013

    Contributors:

    Summary: This polygon shapefile contains geologic features of the offshore area of Carpinteria, California. The offshore part of the map area largely consists of a relatively shallow (less than about 45 m deep), gently offshore-dipping (less than 1 degree) shelf underlain by sediments derived primarily from relatively small coastal watersheds that drain the Santa Ynez Mountains. Shelf deposits are primarily sand (unit Qms) at depths less than about 25 m and, at depths greater than about 25 m, are the more fine-grained sediments (very fine sand, silt, and clay) of unit Qmsf. The boundary between units Qms and Qmsf is based on observations and extrapolation from sediment sampling (see, for example, Reid and others, 2006) and camera ground-truth surveying (see sheet 6). It is important to note that the boundary between units Qms and Qmsf should be considered transitional and approximate and is expected to shift as a result of seasonal- to annual- to decadal-scale cycles in wave climate, sediment supply, and sediment transport. Coarser grained deposits (coarse sand to boulders) of unit Qmsc, which are recognized on the basis of their moderate seafloor relief and high basckscatter (sheet 3), as well as camera observations (sheet 6) and sampling (Reid and others, 2006; Barnard and others, 2009), are found locally in water depths less than about 15 m, except offshore of Rincon Point where they extend to depths of about 21 m. The largest Qmsc deposits are present at the mouths of Rincon Creek and Toro Canyon Creek. The convex seafloor relief of these coarse-grained deposits suggests that they are wave-winnowed lags that armor the seafloor and are relatively resistant to erosion. The sediments may, in part, be relict, having been deposited in shallower marine (or even alluvial?) environments at lower sea levels in the latest Pleistocene and Holocene; this seems especially likely for the arcuate lobe of unit Qmsc that extends 1,700 m offshore from Rincon Point. The Qmsc deposits offshore of Toro Canyon Creek are found adjacent to onshore alluvial and alluvial fan deposits (Minor and others, 2009) and, thus, may have formed as distal-alluvial or fan-delta facies of that system. Offshore bedrock exposures are assigned to the Miocene Monterey Formation (unit Tm) and the Pliocene and Pleistocene Pico Formation (unit QTp), primarily on the basis of extrapolation from the onshore mapping of Tan and others (2003a,b), Tan and Clahan (2004), and Minor and others (2009), as well as the cross sections of Redin and others (1998, 2004) that are constrained by industry seismic-reflection data and petroleum well logs. Where uncertainty exists, bedrock is mapped as an undivided unit (QTbu). These strata are exposed in structural highs that include the Rincon Anticline and uplifts bounded by the Rincon Creek Fault and by the north and south strands of the Red Mountain Fault. Bedrock is, in some places, overlain by a thin (less than 1 m?) veneer of sediment, recognized on the basis of high backscatter, flat relief, continuity with moderate- to high-relief bedrock outcrops, and (in some cases) high-resolution seismic-reflection data; these areas, which are mapped as composite units Qms/Tm, Qms/QTbu, or Qms/QTp, are interpreted as ephemeral sediment layers that may or may not be continuously present, whose presence or absence is a function of the recency and intensity of storm events, seasonal and (or) annual patterns of sediment movement, or longer term climate cycles. Two offshore anthropogenic units also are present in the map area, each related to offshore hydrocarbon production. The first (unit af) consists of coarse artificial fill associated with construction of the Rincon Island petroleum-production facility near the east edge of the map area. The second (unit pd) consists of coarse artificial fill mixed with sediment and shell debris, mapped in outcrops surrounding Rincon Island and at the locations of former oil platforms "Heidi," "Hope," "Hazel," and "Hilda" from the Summerland and Carpinteria oil fields (Barnum, 1998). The Monterey Formation is the primary petroleum-source rock in the Santa Barbara channel, and the Pico Formation is one of the primary petroleum reservoirs. The Offshore of Carpinteria map area is in the Ventura Basin, in the southern part of the Western Transverse Ranges geologic province, which is north of the California Continental Borderland (Fisher and others, 2009). This province has undergone significant north-south compression since the Miocene, and recent GPS data suggest north-south shortening of about 6 to 10 mm/yr (Larson and Webb, 1992; Donnellan and others, 1993). The active, east-west-striking, north-dipping Pitas Point Fault (a broad zone that includes south-dipping reverse-fault splays), Red Mountain Fault, and Rincon Creek Fault are some of the structures on which this shortening occurs (see, for example, Jackson and Yeats, 1982; Sorlien and others, 2000). This fault system, in aggregate, extends for about 100 km through the Ventura and Santa Barbara Basins and represents an important earthquake hazard. In 2007, the California Ocean Protection Council initiated the California Seafloor Mapping Program (CSMP) to create a comprehensive seafloor map of high-resolution bathymetry, marine benthic habitats and geology within the 3-nautical-mile limit of California's State Waters. CSMP has divided coastal California into 110 map blocks, each to be published individually as United States Geological Survey Open-File Reports (OFRs) or Scientific Investigations Maps (SIMs) at a scale of 1:24,000. Maps display seafloor morphology and character, identify potential marine benthic habitats and illustrate both the seafloor geology and shallow (to about 100 m) subsurface geology. Data layers for bathymetry, bathymetric contours, acoustic backscatter, seafloor character, potential benthic habitat and offshore geology were created for each map block, as well as regional-scale data layers for sediment thickness, depth to transition, transgressive contours, isopachs, predicted distributions of benthic macro-invertebrates and visual observations of benthic habitat from video cruises over the entire state. These data are intended for science researchers, students, policy makers, and the general public. This information is not intended for navigational purposes.The data can be used with geographic information systems (GIS) software to display geologic and oceanographic information. Additionally, this coverage can provide a geologic map for the public and geoscience community to aid in assessments and mitigation of geologic hazards in the coastal region and sufficient geologic information for land-use and land-management decisions both onshore and offshore. This information is not intended for navigational purposes. U.S. Geological Survey. (2013). Geology: Offshore of Carpinteria, California, 2013. California State Waters Map Series Data Catalog: U.S. Geological Survey Data Series 781. Available at: http://purl.stanford.edu/xs847fp2624. Map political location: Santa Barbara and Ventura Counties, California Compilation scale: 1:24,000 Base maps used are hillshades generated from IfSAR, LiDAR, and multibeam mapping both onshore and offshore (see sheet 2, SIM 3261 for more information). ). References Cited: Barnum, H.P., 1998, Redevelopment of the western portion of the Rincon offshore oil field, Ventura, California, in Kunitomi, D.S., Hopps, T.E., and Galloway, J.M., eds., Structure and petroleum geology, Santa Barbara Channel, California: American Association of Petroleum Geologists, Pacific Section, and Coast Geological Society, Miscellaneous Publication 46, p. 201-215. Donnellan, A., Hager, B.H., and King, R.W., 1993, Discrepancy between geologic and geodetic deformation rates in the Ventura basin: Nature, v. 346, p. 333-336. Fisher, M.A., Sorlien, C.C., and Sliter, R.W., 2009, Potential earthquake faults offshore southern California from the eastern Santa Barbara channel to Dana Point, in Lee, H.J., and Normark, W.R., eds., Earth science in the urban ocean--The Southern California Continental Borderland: Geological Society of America Special Paper 454, p. 271-290. Jackson, P.A., and Yeats, R.S., 1982, Structural evolution of Carpinteria basin, western Transverse Ranges, California: American Association of Petroleum Geologists Bulletin, v. 66, p. 805-829. Larson, K.M., and Webb, F.H., 1992, Deformation in the Santa Barbara Channel from GPS measurements 1987-1991: Geophysical News Letters, v. 19, p. 1,491-1,494. Minor, S.A., Kellogg, K.S., Stanley, R.G., Gurrola, L.D., Keller, E.A., and Brandt, T.R., 2009, Geologic map of the Santa Barbara coastal plain area, Santa Barbara County, California: U.S. Geological Survey Scientific Investigations Map 3001, scale 1:25,000, 1 sheet, pamphlet 38 p., available at http://pubs.usgs.gov/sim/3001/. Redin, T., Forman, J., and Kamerling, M.J., 1998, Regional structure section across the eastern Santa Barbara Channel, from eastern Santa Cruz Island to the Carpinteria area, Santa Ynez Mountains, in Kunitomi, D.S., Hopps, T.E., and Galloway, J.M., eds., Structure and petroleum geology, Santa Barbara Channel, California: American Association of Petroleum Geologists, Pacific Section, and Coast Geological Society, Miscellaneous Publication 46, p. 195-200, 1 sheet. Redin, T., Kamerling, M.J., and Forman, J., 2004, Santa Barbara Channel structure and correlation sections--Correlation section no. 34R., N-S structure and correlation section, south side central Santa Ynez Mountains across the Santa Barbara channel to the east end of Santa Cruz Island: American Association of Petroleum Geologists, Pacific Section, Publication CS 32, 1 sheet. Reid, J.A., Reid, J.M., Jenkins, C.J., Zimmerman, M., Williams, S.J., and Field, M.E., 2006, usSEABED--Pacific Coast (California, Oregon, Washington) offshore surficial-sediment data release: U.S. Geological Survey Data Series 182, available at http://pubs.usgs.gov/ds/2006/182/. Sorlien, C.C., Gratier, J.P., Luyendyk, B.P., Hornafius, J.S., and Hopps, T.E., 2000, Map restoration of folded and faulted late Cenozoic strata across the Oak Ridge fault, onshore and offshore Ventura basin, California: Geological Society of America Bulletin, v. 112, p. 1,080-1,090. Tan, S.S., and Clahan, K.B., 2004, Geologic map of the White Ledge Peak 7.5' quadrangle, Santa Barbara and Ventura Counties, California--A digital database: California Geological Survey Preliminary Geologic Map, scale 1:24,000, available at http://www.conservation.ca.gov/cgs/rghm/rgm/preliminary_geologic_maps.htm. Tan, S.S., Jones, T.A., and Clahan, K.B., 2003a, Geologic map of the Pitas Point 7.5' quadrangle, Ventura County, California--A digital database: California Geological Survey Preliminary Geologic Map, scale 1:24,000, available at http://www.conservation.ca.gov/cgs/rghm/rgm/preliminary_geologic_maps.htm. Tan, S.S., Jones, T.A., and Clahan, K.B., 2003b, Geologic map of the Ventura 7.5' quadrangle, Ventura County, California--A digital database: California Geological Survey Preliminary Geologic Map, scale 1:24,000, available at http://www.conservation.ca.gov/cgs/rghm/rgm/preliminary_geologic_maps.htm. This layer is presented in the WGS84 coordinate system for web display purposes. Downloadable data are provided in native coordinate system or projection.

  14. Title: Contours (10m): Offshore of Santa Barbara, California, 2007

    Contributors:

    Summary: This line shapefile contains bathymetric contours at 10 meter intervals for the offshore area of Santa Barbara, California. This layer was generated from bathymetry data collected by Fugro Pelagos and California State University, Monterey Bay, Seafloor Mapping Lab (CSUMB) for the U.S. Army Corps of Engineers (USACE) Joint Lidar Bathymetry Technical Center of Expertise. Most of the offshore area was mapped by CSUMB in the summer of 2007, using a 244-kHz Reson 8101 multibeam echosounder. Smaller areas in the far-east nearshore, as well as further offshore to the west and in the southeast outer shelf area, were mapped by the USGS in 2005 and 2006, using a combination of 468-kHz (2005) and 117-kHz (2006) SEA (AP) Ltd. SWATHplus-M phase-differencing sidescan sonars. The nearshore bathymetry and coastal topography were mapped for USACE by Fugro Pelagos in 2009, using the SHOALS-1000T bathymetric-lidar and Leica ALS60 topographic-lidar systems. All these mapping missions combined to collect bathymetry from the 0-m isobath to beyond the 3-nautical-mile limit of California's State Waters. A smooth arithmetic mean convolution function that assigns a weight of one-ninth to each cell in a 3-pixel by 3-pixel matrix was then applied iteratively to the grid ten times. Following smoothing, contour lines were generated at 10-m intervals, then the contours were clipped to the boundary of the map area. A map that shows these data is published in Scientific Investigations Map 3281, "California State Waters Map Series--Offshore of Santa Barbara, California." This layer is part of USGS Data Series 781. In 2007, the California Ocean Protection Council initiated the California Seafloor Mapping Program (CSMP) to create a comprehensive seafloor map of high-resolution bathymetry, marine benthic habitats and geology within the 3-nautical-mile limit of California's State Waters. CSMP has divided coastal California into 110 map blocks, each to be published individually as United States Geological Survey Open-File Reports (OFRs) or Scientific Investigations Maps (SIMs) at a scale of 1:24,000. Maps display seafloor morphology and character, identify potential marine benthic habitats and illustrate both the seafloor geology and shallow (to about 100 m) subsurface geology. Data layers for bathymetry, bathymetric contours, acoustic backscatter, seafloor character, potential benthic habitat and offshore geology were created for each map block, as well as regional-scale data layers for sediment thickness, depth to transition, transgressive contours, isopachs, predicted distributions of benthic macro-invertebrates and visual observations of benthic habitat from video cruises over the entire state. Part of the marine habitat mapping data for the California North Central Coast Mapping Project (NCCMP), this coverage can be used to to aid in assessments and mitigation of geologic hazards in the coastal region and to provide sufficient geologic information for land-use and land-management decisions both onshore and offshore. These data are intended for science researchers, students, policy makers, and the general public. This information is not intended for navigational purposes.The data can be used with geographic information systems (GIS) software to display geologic and oceanographic information. U.S. Geological Survey. (2013). Contours (10m): Offshore of Santa Barbara, California, 2007. California State Waters Map Series Data Catalog: U.S. Geological Survey Data Series 781. Available at: http://purl.stanford.edu/jf516hs5188. This layer is presented in the WGS84 coordinate system for web display purposes. Downloadable data are provided in native coordinate system or projection.

  15. Title: Geology: Offshore of Santa Barbara, California, 2013

    Contributors:

    Summary: This polygon shapefile depicts geological features within the offshore area of Santa Barbara, California. The offshore part of the map area largely consists of a relatively shallow (less than 75 m deep), gently offshore-dipping (less than 1 degree) shelf underlain by sediments derived primarily from relatively small coastal watersheds that drain the Santa Ynez Mountains. Shelf deposits are primarily sand (unit Qms) at water depths less than about 35 to 50 m and, at depths greater than about 35 to 50 m, are the more fine-grained sediments (very fine sand, silt, and clay) of unit Qmsf. The boundary between units Qms and Qmsf is based on observations and extrapolation from sediment sampling (see, for example, Reid and others, 2006) and camera ground-truth surveying (see sheet 6). It is important to note that the boundary between units Qms and Qmsf should be considered transitional and approximate and is expected to shift as a result of seasonal- to annual- to decadal-scale cycles in wave climate, sediment supply, and sediment transport. Coarser grained deposits (coarse sand to boulders) of unit Qmsc, which are recognized on the basis of their high backscatter and, in some cases, their moderate seafloor relief (sheets 1, 2, 3), are found most prominently in a large (about 0.75 km2) lobe that is present from about 1,800 to 3,600 m offshore of the mouth of Arroyo Burro, in water depths of about 36 to 65 m. The lobe is inferred to consist of coarse-grained sediment (coarse sand to boulders) that is resistant to erosion. Although these coarse-grained deposits almost certainly are derived from Arroyo Burro, the lobe could represent either the underflow deposits of late Holocene floods or a relict geomorphologic feature, having been deposited in shallower marine deltaic (or even alluvial?) environments at lower sea levels in the latest Pleistocene and early Holocene. Unit Qmsc also is present in shallower water (depths of about 10 to 20 m), most notably in a small area (approximately 0.09 km2) that extends offshore from Montecito Creek, in the eastern part of the map area. The presence of coarser grained sediment (coarse sand and possibly gravel) also is inferred in shallower water (depths of 10 to 20 m) offshore from Arroyo Burro, but these deposits are mapped as unit Qmss because they are found within arcuate scour depressions that have been referred to as "rippled scour depressions" (see, for example, Cacchione and others, 1984; Phillips, 2007) or "sorted bedforms" (see, for example, Murray and Thieler, 2004; Goff and others, 2005; Trembanis and Hume, 2011). Although the general area in which Qmss scour depressions are found is not likely to change substantially, the boundaries of the unit(s), as well as the locations of individual depressions and their intervening flat sand sheets, likely are ephemeral, changing during significant storm events. Hydrocarbon-seep-induced topography, which is present most prominently along the axis of anticlines, includes many features (described by Keller and others, 2007) along the trend of the Mid-Channel Anticline, about 10 km south of the map area in the Santa Barbara Channel. Geologic map units associated with hydrocarbon emissions in the map area include grouped to solitary pockmarks (unit Qmp) and asphalt (tar) deposits (unit Qas), as well as areas of undifferentiated hydrocarbon-related features (unit Qhfu) that probably include a mix of mounds, mud volcanoes, pockmarks, carbonate mats, and other constructional and erosional "seabed forms" (see Keller and others, 2007), all of which are superimposed on consolidated, undivided Miocene and Pliocene bedrock (unit Tbu). Offshore bedrock exposures are assigned to the Miocene Monterey Formation (unit Tm) and to the undivided Miocene and Pliocene bedrock unit (Tbu), primarily on the basis of extrapolation from the onland geologic mapping of Minor and others (2009), as well as the geologic cross sections of Redin (2005). These cross sections, which are constrained by industry seismic-reflection data and petroleum well logs, suggest that a considerable part of the undivided bedrock unit may belong to the Pliocene and Pleistocene Pico Formation. Bedrock is, in some places, overlain by a thin (less than 1 m?) veneer of sediment, recognized on the basis of high backscatter, flat relief, continuity with moderate- to high-relief bedrock outcrops, and (in some cases) high-resolution seismic-reflection data; these areas, which are mapped as composite units Qms/Tbu or Qms/Tm, are interpreted as ephemeral sediment layers that may or may not be continuously present, depending on storms, seasonal and (or) annual patterns of sediment movement, or longer term climate cycles. The Santa Barbara Channel region, including the map area, has a long history of petroleum production (Barnum, 1998). The Monterey Formation is the primary petroleum-source rock in the Santa Barbara Channel, and the Pico Formation is one of the primary petroleum reservoirs. The bedrock units typically are exposed in structural highs that include uplifts associated with the partly blind(?), south-dipping Rincon Creek Fault Zone and the outer shelf anticlinal uplift that developed above the south strand of the Red Mountain Fault in the southwestern part of the map area. The Offshore of Santa Barbara map area is in the Ventura Basin, in the southern part of the Western Transverse Ranges geologic province, which is north of the California Continental Borderland (Fisher and others, 2009). This province has undergone significant north-south compression since the Miocene, and recent GPS data suggest north-south shortening of about 6 mm/yr (Larson and Webb, 1992). The active, east-west-striking Red Mountain and Rincon Creek Faults and their related folds are some of the structures on which this shortening occurs. This fault system, in aggregate, extends for about 100 km through the Ventura and Santa Barbara Basins and represents an important earthquake hazard (see, for example, Fisher and others, 2009). Very high uplift rates of onland marine terraces from More Mesa (2.2 mm/yr), in the western part of the map area, to Summerland (0.7 mm/yr), a few kilometers east of the map area, are further indication of rapid shortening in this region (Keller and Gurrola, 2000). A map that shows these data is published in Scientific Investigations Map 3281, "California State Waters Map Series--Offshore of Santa Barbara, California." This layer is part of USGS Data Series 781. In 2007, the California Ocean Protection Council initiated the California Seafloor Mapping Program (CSMP) to create a comprehensive seafloor map of high-resolution bathymetry, marine benthic habitats and geology within the 3-nautical-mile limit of California's State Waters. CSMP has divided coastal California into 110 map blocks, each to be published individually as United States Geological Survey Open-File Reports (OFRs) or Scientific Investigations Maps (SIMs) at a scale of 1:24,000. Maps display seafloor morphology and character, identify potential marine benthic habitats and illustrate both the seafloor geology and shallow (to about 100 m) subsurface geology. Data layers for bathymetry, bathymetric contours, acoustic backscatter, seafloor character, potential benthic habitat and offshore geology were created for each map block, as well as regional-scale data layers for sediment thickness, depth to transition, transgressive contours, isopachs, predicted distributions of benthic macro-invertebrates and visual observations of benthic habitat from video cruises over the entire state. This coverage can be used to to aid in assessments and mitigation of geologic hazards in the coastal region and to provide sufficient geologic information for land-use and land-management decisions both onshore and offshore. These data are intended for science researchers, students, policy makers, and the general public. This information is not intended for navigational purposes.The data can be used with geographic information systems (GIS) software to display geologic and oceanographic information. U.S. Geological Survey. (2013). Geology: Offshore of Santa Barbara, California, 2013. California State Waters Map Series Data Catalog: U.S. Geological Survey Data Series 781. Available at: http://purl.stanford.edu/pc959qv9403. Map political location: Santa Barbara County, California Compilation scale: 1:24,000 Base maps used are hillshades generated from IfSAR, LiDAR, and multibeam mapping both onshore and offshore (see sheet 2, SIM 3281, for more information). References Cited: Barnum, H.P., 1998, Redevelopment of the western portion of the Rincon offshore oil field, Ventura, California, in Kunitomi, D.S., Hopps, T.E., and Galloway, J.M., eds., Structure and petroleum geology, Santa Barbara Channel, California: American Association of Petroleum Geologists, Pacific Section, and Coast Geological Society, Miscellaneous Publication 46, p. 201-215. Cacchione, D.A., Drake, D.E., Grant, W.D., and Tate, G.B., 1984, Rippled scour depressions of the inner continental shelf off central California: Journal of Sedimentary Petrology, v. 54, p. 1,280-1,291. Dibblee, T.W., Jr., 1986a, Geologic map of the Carpinteria quadrangle, Santa Barbara County, California: Santa Barbara, Calif., Dibblee Geological Foundation Map DF-04, scale 1:24,000. Dibblee, T.W., Jr., 1986b, Geologic map of the Santa Barbara quadrangle, Santa Barbara County, California: Santa Barbara, Calif., Dibblee Geological Foundation Map DF-06, scale 1:24,000. Fisher, M.A., Sorlien, C.C., and Sliter, R.W., 2009, Potential earthquake faults offshore southern California from the eastern Santa Barbara channel to Dana Point, in Lee, H.J., and Normark, W.R., eds., Earth science in the urban ocean--The Southern California Continental Borderland: Geological Society of America Special Paper 454, p. 271-290. Goff, J.A., Mayer, L.A., Traykovski, P., Buynevich, I., Wilkens, R., Raymond, R., Glang, G., Evans, R.L., Olson, H., and Jenkins, C., 2005, Detailed investigations of sorted bedforms or "rippled scour depressions," within the Martha's Vineyard Coastal Observatory, Massachusetts: Continental Shelf Research, v. 25, p. 461-484. Keller, E.A., Duffy, M., Kennett, J.P., and Hill, T., 2007, Tectonic geomorphology and hydrocarbon potential of the Mid-Channel anticline, Santa Barbara Basin, California: Geomorphology, v. 89, p. 274-286. Keller, E.A., and Gurrola, L.D., 2000, Final report, July, 2000--Earthquake hazard of the Santa Barbara fold belt, California: NEHRP Award #99HQGR0081, SCEC Award #572726, 78 p., available at http://www.scec.org/research/98research/98gurrolakeller.pdf. Larson, K.M., and Webb, F.H., 1992, Deformation in the Santa Barbara Channel from GPS measurements 1987-1991: Geophysical News Letters, v. 19, p. 1,491-1,494. Minor, S.A., Kellogg, K.S., Stanley, R.G., Gurrola, L.D., Keller, E.A., and Brandt, T.R., 2009, Geologic map of the Santa Barbara coastal plain area, Santa Barbara County, California: U.S. Geological Survey Scientific Investigations Map 3001, scale 1:25,000, 1 sheet, pamphlet 38 p., available at http://pubs.usgs.gov/sim/3001/. Murray, B., and Thieler, E.R., 2004, A new hypothesis and exploratory model for the formation of large-scale inner-shelf sediment sorting and "rippled scour depressions": Continental Shelf Research, v. 24, no. 3, p. 295-315. Phillips, E., 2007, Exploring rippled scour depressions offshore Huntington Beach, CA: Santa Cruz, University of California, M.S. thesis, 58 p. Redin, T., 2005, Santa Barbara Channel structure and correlation sections--Correlation Section no. 34A, Summerland area, Santa Ynez Mountains, across the east central Santa Barbara Channel to the China Bay area, Santa Cruz Island: American Association of Petroleum Geologists, Pacific Section, Publication CS 34A, 1 sheet. Reid, J.A., Reid, J.M., Jenkins, C.J., Zimmerman, M., Williams, S.J., and Field, M.E., 2006, usSEABED--Pacific Coast (California, Oregon, Washington) offshore surficial-sediment data release: U.S. Geological Survey Data Series 182, available at http://pubs.usgs.gov/ds/2006/182/. Trembanis, A.C., and Hume, T.M., 2011, Sorted bedforms on the inner shelf off northeastern New Zealand--Spatiotemporal relationships and potential paleo-environmental implications: Geo-Marine Letters, v. 31, p. 203-214. Weber, K.M., List, J.H., and Morgan, K.L., 2005, An operational Mean High Water datum for determination of shoreline position from topographic lidar data: U.S. Geological Survey Open-File Report 2005-1027, available at http://pubs.usgs.gov/of/2005/1027/. This layer is presented in the WGS84 coordinate system for web display purposes. Downloadable data are provided in native coordinate system or projection.

  16. Title: Folds: Offshore of Ventura, California, 2013

    Contributors:

    Summary: This line shapefile depicts geological folds within the offshore area of Ventura, California. The map area is in the Ventura Basin, in the southern part of the Western Transverse Ranges geologic province, which is north of the California Continental Borderland (Fisher and others, 2009). This province has undergone significant north-south compression since the Miocene, and recent GPS data suggest north-south shortening of about 6 to 10 mm/yr (Larson and Webb, 1992; Donnellan and others, 1993). The active, north-verging Oak Ridge Fault and the south-verging Pitas Point-Ventura Fault are two of the structures on which this shortening occurs (for example, Sorlien and others, 2000; Fisher and others, 2005, 2009). High-resolution seismic-reflection profiles (sheet 8, SIM 3254) reveal that neither fault ruptures the surface; instead, the surface expression of each fault is a narrow, asymmetric fold that involves the uppermost Pleistocene and Holocene (less than 21 ka) sedimentary section. Both structures are inferred to be parts of long fault systems that extend for more than 100 km, representing important potential earthquake hazards (for example, Fisher and others, 2009). Shortening is also occurring on the Montalvo Fault and Anticline system along the southeast edge of the map area (part of the broader Oak Ridge Fault Zone; Yeats, 1998) and on the Rincon-Ventura Avenue Anticline (for example, Rockwell and others, 1988), which crosses the northwest edge of the map area. The map that shows these data is published in Scientific Investigations Map 3254, "California State Waters Map Series--Offshore of Ventura, California." This layer os part of USGS Data Series 781. In 2007, the California Ocean Protection Council initiated the California Seafloor Mapping Program (CSMP) to create a comprehensive seafloor map of high-resolution bathymetry, marine benthic habitats and geology within the 3-nautical-mile limit of California's State Waters. CSMP has divided coastal California into 110 map blocks, each to be published individually as United States Geological Survey Open-File Reports (OFRs) or Scientific Investigations Maps (SIMs) at a scale of 1:24,000. Maps display seafloor morphology and character, identify potential marine benthic habitats and illustrate both the seafloor geology and shallow (to about 100 m) subsurface geology. Data layers for bathymetry, bathymetric contours, acoustic backscatter, seafloor character, potential benthic habitat and offshore geology were created for each map block, as well as regional-scale data layers for sediment thickness, depth to transition, transgressive contours, isopachs, predicted distributions of benthic macro-invertebrates and visual observations of benthic habitat from video cruises over the entire state. This coverage can be used to to aid in assessments and mitigation of geologic hazards in the coastal region and to provide sufficient geologic information for land-use and land-management decisions both onshore and offshore. These data are intended for science researchers, students, policy makers, and the general public. This information is not intended for navigational purposes.The data can be used with geographic information systems (GIS) software to display geologic and oceanographic information. U.S. Geological Survey. (2013). Folds: Offshore of Ventura, California, 2013. California State Waters Map Series Data Catalog: U.S. Geological Survey Data Series 781. Available at: http://purl.stanford.edu/cv835rk7135. Map political location: Ventura County, California Compilation scale: 1:24,000 Base maps used are hillshades generated from IfSAR, LiDAR, and multibeam mapping both onshore and offshore (see sheet 2, SIM 3254, for more information). . References Cited Donnellan, A., Hager, B.H., and King, R.W., 1993, Discrepancy between geologic and geodetic deformation rates in the Ventura basin: Nature, v. 346, p. 333?336. Fisher, M.A., Greene, H.G., Normark, W.R., and Sliter, R.W., 2005, Neotectonics of the offshore Oak Ridge fault near Ventura, southern California: Bulletin of the Seismological Society of America, v. 95, p. 739?744. Fisher, M.A., Sorlien, C.C., and Sliter, R.W., 2009, Potential earthquake faults offshore southern California from the eastern Santa Barbara channel to Dana Point, in Lee, H.J., and Normark, W.R., eds., Earth science in the urban ocean--The Southern California Continental Borderland: Geological Society of America Special Paper 454, p. 271-290. Larson, K.M., and Webb, F.H., 1992, Deformation in the Santa Barbara Channel from GPS measurements 1987-1991: Geophysical News Letters, v. 19, p. 1,491-1,494. Rockwell, T.K., Keller, E.A., and Dembroff, G.R., 1988, Quaternary rate of folding of the Ventura Avenue anticline, western Transverse Ranges, southern California: Geological Society of America Bulletin, v. 100, p. 850-858. Sorlien, C.C., Gratier, J.P., Luyendyk, B.P., Hornafius, J.S., and Hopps, T.E, 2000, Map restoration of folded and faulted late Cenozoic strata across the Oak Ridge fault, onshore and offshore Ventura basin, California: Geological Society of America Bulletin, v. 112, p. 1,080-1,090. Yeats, R.S., 1998, North-vergent thick-skinned or south-vergent thin-skinned Oak Ridge fault--A view from the coast, in Kunitomi, D.S., Hopps, T.E., and Galloway, J.M., eds., Structure and petroleum geology, Santa Barbara Channel, California: American Association of Petroleum Geologists, Pacific Section and Coast Geological Society, Miscellaneous Publication 46, p. 143-152. This layer is presented in the WGS84 coordinate system for web display purposes. Downloadable data are provided in native coordinate system or projection.

  17. Title: Geology: Offshore of Ventura, California, 2013

    Contributors:

    Summary: This polygon shapefile depicts geological features within the offshore area of Ventura, California. The offshore part of the map area largely consists of a relatively shallow (less than 40 m deep), gently offshore-dipping (less than 1 degree) shelf underlain by recent marine and deltaic deposits of the Santa Clara and Ventura Rivers. The mean annual sediment load of these two rivers exceeds 3.25 kt/yr (Warrick and Farnsworth, 2009a), and the area is largely part of an extensive Quaternary deltaic depocenter (Dahlen, 1992; Slater and others, 2002; Sommerfield and others, 2009). Shelf deposits are primarily sand (Qms) at depths less than about 25 m and, at depths greater than about 25 m, are more fine-grained sediment (very fine sand, silt and clay) (Qmsf). The boundary between Qms and Qmsf is based on observations and extrapolation from sediment sampling (for example, Reid and others, 2006) and camera ground-truth surveying (see sheet 6, SIM 3254). Given that this is an area of abundant sediment supply and active sediment transport (Barnard and others, 2009; Warrick and Farnsworth, 2009a), it is important to note that the boundary between Qms and Qmsf should be considered transitional and approximate and is expected to shift as a result of seasonal- to annual- to decadal-scale cycles in wave climate, sediment supply, and sediment transport. Offshore of the mouth of the Ventura River, at water depths of between 20 and 30 m, the sandy shelf (Qms) includes an area of irregular arcuate depressions floored by coarser sediment (coarse sand and possibly gravel; Qmss). Such features have been referred to as "rippled-scour depressions" (for example, Cacchione and others, 1984) or "sorted bedforms" (for example, Goff and others, 2005; Trembanis and Hume, 2011). Although the general area in which Qmss depressions are found is not likely to change substantially, the boundaries of the unit(s), as well as the locations of individual depressions and their intervening flat sand sheets, likely are ephemeral, changing during significant storm events. Coarser grained deposits (Qmsc), which are recognized on the basis of high backscatter (sheet 3, SIM 3254), camera observations (sheet 6, SIM 3254), and sampling (Reid and others, 2006; Barnard and others, 2009), are found locally in water depths less than about 15 m. These units are concentrated at the mouths of the Santa Clara and Ventura Rivers and a few smaller coastal watersheds to the northwest, and they are inferred to represent wave-winnowed lags of deltaic sediment. It is likely that these deposits are ephemeral and are commonly covered by finer grained sediment. However, a few outcrops of Qmsc between Ventura and Pitas Point are not obviously tied to coastal watersheds. One large area in particular is characterized by high backscatter and rugosity (sheets 3 and 5, SIM 3254, respectively); camera ground-truth aurveying (sheet 6, SIM 3254) reveals that this area consists of boulder, cobble, gravel, and sand. The area lies immediately offshore of steep slopes underlain by variably consolidated Pliocene and Pleistocene deposits (sand, gravel, cobbles) of the Pico, Santa Barbara, and Saugus Formations (onshore units Tp, QTsb, and Qs, respectively), which are highly susceptible to landsliding (Tan and others, 2003a,b); thus, this area mostly likely represents wave-winnowed landslide deposits. It is also possible that these high-backscatter areas are partly underlain by bedrock, as is inferred on sheet 7 (SIM 3254). The steep onshore slopes are immediately north of, and in the hanging wall of, the active Pitas Point Fault, a location that undoubtedly has contributed to slope instability. The seafloor bedrock exposures south and west of Punta Gorda are inferred to consist of the Pico Formation (Tp) on the basis of their backscatter, rugosity, and relief, as well as adjacent exposures of Tp in coastal bluffs and platforms and their similar location along the axis of the Rincon-Ventura Avenue Anticline (Tan and others, 2003a,b). A few shallow (less than 10 m deep) areas offshore between Punta Gorda and Pitas Point are inferred to be underlain by a composite unit (Qms/Tp) consisting of the Pico Formation overlain by a thin (probably ephemeral) marine-sediment layer. The Offshore of Ventura map area is in the Ventura Basin, in the southern part of the Western Transverse Ranges geologic province, which is north of the California Continental Borderland (Fisher and others, 2009). This province has undergone significant north-south compression since the Miocene, and recent GPS data suggest north-south shortening of about 6 to 10 mm/yr (Larson and Webb, 1992; Donnellan and others, 1993). The active, north-verging Oak Ridge Fault and the south-verging Pitas Point-Ventura Fault are two of the structures on which this shortening occurs (for example, Sorlien and others, 2000; Fisher and others, 2009). High-resolution seismic-reflection data (sheet 8, SIM 3254) reveal that neither fault ruptures the surface; instead the surface expression of each fault is a narrow, asymmetric fold that involves the uppermost Pleistocene and Holocene (less than 21 ka) sedimentary section. Both structures are inferred to be parts of long fault systems that extend for more than 100 km, representing important potential earthquake hazards (for example, Fisher and others, 2009). Shortening is also occurring on the Montalvo Fault and Anticline system along the southeast edge of the map area (part of the broader Oak Ridge Fault Zone; Yeats, 1998) and on the Rincon-Ventura Avenue Anticline (for example, Rockwell and others, 1988), which crosses the northwest edge of the map area. The map that shows these data is published in Scientific Investigations Map 3254, "California State Waters Map Series--Offshore of Ventura, California." This layer os part of USGS Data Series 781. In 2007, the California Ocean Protection Council initiated the California Seafloor Mapping Program (CSMP) to create a comprehensive seafloor map of high-resolution bathymetry, marine benthic habitats and geology within the 3-nautical-mile limit of California's State Waters. CSMP has divided coastal California into 110 map blocks, each to be published individually as United States Geological Survey Open-File Reports (OFRs) or Scientific Investigations Maps (SIMs) at a scale of 1:24,000. Maps display seafloor morphology and character, identify potential marine benthic habitats and illustrate both the seafloor geology and shallow (to about 100 m) subsurface geology. Data layers for bathymetry, bathymetric contours, acoustic backscatter, seafloor character, potential benthic habitat and offshore geology were created for each map block, as well as regional-scale data layers for sediment thickness, depth to transition, transgressive contours, isopachs, predicted distributions of benthic macro-invertebrates and visual observations of benthic habitat from video cruises over the entire state. This coverage can be used to to aid in assessments and mitigation of geologic hazards in the coastal region and to provide sufficient geologic information for land-use and land-management decisions both onshore and offshore. These data are intended for science researchers, students, policy makers, and the general public. This information is not intended for navigational purposes.The data can be used with geographic information systems (GIS) software to display geologic and oceanographic information. U.S. Geological Survey. (2013). Geology: Offshore of Ventura, California, 2013. California State Waters Map Series Data Catalog: U.S. Geological Survey Data Series 781. Available at: http://purl.stanford.edu/jt228rv7000. Map political location: Ventura County, California Compilation scale: 1:24,000 Base maps used are hillshades generated from IfSAR, LiDAR, and multibeam mapping both onshore and offshore (see sheet 2, SIM 3254, for more information). References Cited Barnard, P.L., Revell, D.L., Hoover, D., Warrick, J., Brocatus, J., Draut, A.E., Dartnell, P., Elias, E., Mustain, N., Hart, P.E., and Ryan, H.F., 2009, Coastal processes study of Santa Barbara and Ventura counties, California: U.S. Geological Survey Open-File Report 2009-1029, 926 p., available at http://pubs.usgs.gov/of/2009/1029/. Cacchione, D.A., Drake, D.E., Grant, W.D., and Tate, G.B., 1984, Rippled scour depressions of the inner continental shelf off Central California: Journal of Sedimentary Petrology, v. 54, p. 1,280-1,291. Dahlen, M.Z., 1992, Sequence stratigraphy, depositional history, and middle to late Quaternary sea levels of the Ventura shelf, California: Quaternary Research, v. 38, p. 234-245. Donnellan, A., Hager, B.H., and King, R.W., 1993, Discrepancy between geologic and geodetic deformation rates in the Ventura basin: Nature, v. 346, p. 333-336. Fisher, M.A., Sorlien, C.C., and Sliter, R.W., 2009, Potential earthquake faults offshore southern California from the eastern Santa Barbara channel to Dana Point, in Lee, H.J., and Normark, W.R., eds., Earth science in the urban ocean--The Southern California Continental Borderland: Geological Society of America Special Paper 454, p. 271-290. Goff, J.A., Mayer, L.A., Traykovski, P., Buynevich, I., Wilkens, R., Raymond, R., Glang, G., Evans, R.L., Olson, H., and Jenkins, C., 2005, Detailed investigations of sorted bedforms or "rippled scour depressions," within the Marthas's Vineyard Coastal Observatory, Massachusetts: Continental Shelf Research, v. 25, p. 461-484. Larson, K.M., and Webb, F.H., 1992, Deformation in the Santa Barbara Channel from GPS measurements 1987-1991: Geophysical News Letters, v. 19, p. 1,491-1,494. Reid, J.A., Reid, J.M., Jenkins, C.J., Zimmerman, M., Williams, S.J., and Field, M.E., 2006, usSEABED--Pacific Coast (California, Oregon, Washington) offshore surficial-sediment data release: U.S. Geological Survey Data Series 182, available at http://pubs.usgs.gov/ds/2006/182/. Rockwell, T.K., Keller, E.A., and Dembroff, G.R., 1988, Quaternary rate of folding of the Ventura Avenue anticline, western Transverse Ranges, southern California: Geological Society of America Bulletin, v. 100, p. 850-858. Slater, R.A., Gorsline, D.S., Kolpack, R.L., and Shiller, G.I., 2002, Post-glacial sediments of the California shelf from Cape San Martin to the US-Mexico border: Quaternary International, v. 92, p. 45-61. Sommerfield, C.R., Lee, H.J., and Normark, W.R., 2009, Postglacial sedimentary record of the southern California continental shelf and slope, Point Conception to Dana Point, in Lee, H.J., and Normark, W.R., eds., Earth science in the urban ocean--The Southern California Continental Borderland: Geological Society of America Special Paper 454, p. 89-116. Sorlien, C.C., Gratier, J.P., Luyendyk, B.P., Hornafius, J.S., and Hopps, T.E, 2000, Map restoration of folded and faulted late Cenozoic strata across the Oak Ridge fault, onshore and offshore Ventura basin, California: Geological Society of America Bulletin, v. 112, p. 1,080-1,090. Tan, S.S., Jones, T.A., and Clahan, K.B., 2003a, Geologic map of the Ventura 7.5' quadrangle, Ventura County, California--A digital database: California Geological Survey Preliminary Geologic Map, scale 1:24,000, available at http://www.conservation.ca.gov/cgs/rghm/rgm/preliminary_geologic_maps.htm. Tan, S.S., Jones, T.A., and Clahan, K.B., 2003b, Geologic map of the Pitas Point 7.5' quadrangle, Ventura County, California--A digital database: California Geological Survey Preliminary Geologic Map, scale 1:24,000, available at http://www.conservation.ca.gov/cgs/rghm/rgm/preliminary_geologic_maps.htm. Trembanis, A.C., and Hume, T.M., 2011, Sorted bedforms on the inner shelf off northeastern New Zealand--Spatiotemporal relationships and potential paleo-environmental implications: Geo-Marine Letters, v. 31, p. 203-214. Warrick, J.A., and Farnsworth, K.L., 2009a, Sources of sediment to the coastal waters of the Southern California Bight, in Lee, H.J., and Normark, W.R., eds., Earth science in the urban ocean--The Southern California Continental Borderland: Geological Society of America Special Paper 454, p. 39-52. Yeats, R.S., 1998, North-vergent thick-skinned or south-vergent thin-skinned Oak Ridge fault--A view from the coast, in Kunitomi, D.S., Hopps, T.E., and Galloway, J.M., eds., Structure and petroleum geology, Santa Barbara Channel, California: American Association of Petroleum Geologists, Pacific Section and Coast Geological Society, Miscellaneous Publication 46, p. 143-152. This layer is presented in the WGS84 coordinate system for web display purposes. Downloadable data are provided in native coordinate system or projection.

  18. Title: Faults: Offshore of Santa Barbara, California, 2013

    Contributors:

    Summary: This line shapefile depicts fault lines within the offshore area of Santa Barbara, California. This map area lies within the Western Transverse Ranges geologic province, which is north of the California Continental Borderland (Fisher and others, 2009). This province has undergone significant north-south compression since the Miocene, and recent GPS data suggest north-south shortening of about 6 mm/yr (Larson and Webb, 1992). The active, east-west-striking Pitas Point Fault (a broad zone that includes south-dipping reverse faults), Red Mountain Fault, and Rincon Creek Fault are some of the structures on which this shortening occurs (see, for example, Jackson and Yeats, 1982; Sorlien and others, 2000; Fisher and others, 2009). This fault system, in aggregate, extends for about 100 km through the Ventura and Santa Barbara Basins and represents an important earthquake hazard (see, for example, Fisher and others, 2009). A map that shows these data is published in Scientific Investigations Map 3281, "California State Waters Map Series--Offshore of Santa Barbara, California." This layer is part of USGS Data Series 781. In 2007, the California Ocean Protection Council initiated the California Seafloor Mapping Program (CSMP) to create a comprehensive seafloor map of high-resolution bathymetry, marine benthic habitats and geology within the 3-nautical-mile limit of California's State Waters. CSMP has divided coastal California into 110 map blocks, each to be published individually as United States Geological Survey Open-File Reports (OFRs) or Scientific Investigations Maps (SIMs) at a scale of 1:24,000. Maps display seafloor morphology and character, identify potential marine benthic habitats and illustrate both the seafloor geology and shallow (to about 100 m) subsurface geology. Data layers for bathymetry, bathymetric contours, acoustic backscatter, seafloor character, potential benthic habitat and offshore geology were created for each map block, as well as regional-scale data layers for sediment thickness, depth to transition, transgressive contours, isopachs, predicted distributions of benthic macro-invertebrates and visual observations of benthic habitat from video cruises over the entire state. This coverage can be used to to aid in assessments and mitigation of geologic hazards in the coastal region and to provide sufficient geologic information for land-use and land-management decisions both onshore and offshore. These data are intended for science researchers, students, policy makers, and the general public. This information is not intended for navigational purposes.The data can be used with geographic information systems (GIS) software to display geologic and oceanographic information. U.S. Geological Survey. (2013). Faults: Offshore of Santa Barbara, California, 2013. California State Waters Map Series Data Catalog: U.S. Geological Survey Data Series 781. Available at: http://purl.stanford.edu/zc952cn1722. Map political location: Santa Barbara County, California Compilation scale: 1:24,000 Base maps used are hillshades generated from IfSAR, LiDAR, and multibeam mapping both onshore and offshore (see sheet 2, SIM 3281, for more information). References Cited: Fisher, M.A., Sorlien, C.C., and Sliter, R.W., 2009, Potential earthquake faults offshore southern California from the eastern Santa Barbara channel to Dana Point, in Lee, H.J., and Normark, W.R., eds., Earth science in the urban ocean--The Southern California Continental Borderland: Geological Society of America Special Paper 454, p. 271-290. Jackson, P.A., and Yeats, R.S., 1982, Structural evolution of Carpinteria basin, western Transverse Ranges, California: American Association of Petroleum Geologists Bulletin, v. 66, p. 805-829. Larson, K.M., and Webb, F.H., 1992, Deformation in the Santa Barbara Channel from GPS measurements 1987-1991: Geophysical News Letters, v. 19, p. 1,491-1,494. Sorlien, C.C., Gratier, J.P., Luyendyk, B.P., Hornafius, J.S., and Hopps, T.E., 2000, Map restoration of folded and faulted late Cenozoic strata across the Oak Ridge fault, onshore and offshore Ventura basin, California: Geological Society of America Bulletin, v. 112, p. 1,080-1,090. This layer is presented in the WGS84 coordinate system for web display purposes. Downloadable data are provided in native coordinate system or projection.

  19. Title: Folds: Hueneme Canyon and Vicinity, California, 2012

    Contributors:

    Summary: This line shapefile represents geologic folds for Hueneme Canyon and the surrounding vicinity in California. The offshore map area is characterized by two major physiographic features: (1) the nearshore continental shelf and upper slope; and (2) Hueneme Canyon and parts of three smaller, unnamed submarine canyons incised into the shelf southeast of Hueneme Canyon. The nearshore, shelf, and slope are underlain by recent sediments and characterized by active sediment transport. Shelf and slope morphology and evolution result from drainage incision into deltaic sediments of the Oxnard plain during sea-level lowstand and subsequent sedimentation as sea level rose about 125 to 130 m over the last ~18,000 to 20,000 years (Lambeck and Chappell, 2001). This map area occurs in the southern part of the Western Transverse Ranges province, north of the California Continental Borderland (Fisher and others, 2009). Shelf deposits are deformed in the northernmost part of the map area by the west-trending Montalvo Fault and Anticline (Fisher and others, 2005). The Montalvo structures are part of a band of active deformation that includes the west-trending Oak Ridge Fault (Fisher and others, 2005), which extends into the offshore just a few km north of this map area. The Oak Ridge-Montalvo Fault Zone forms the southern boundary of the Ventura Basin and is considered an earthquake hazard because it extends along strike for about 130 km and appears to be the westward continuation of the fault system responsible for the 1994 M 6.7 Northridge earthquake. Only data for offshore map units are released digitally in this publication. For onshore geology (sheet 10) see Clahan (2003). The map was published in Scientific Investigations Map 3225. This layer is part of the USGS Data Series 781. In 2007, the California Ocean Protection Council initiated the California Seafloor Mapping Program (CSMP) to create a comprehensive seafloor map of high-resolution bathymetry, marine benthic habitats and geology within the 3-nautical-mile limit of California's State Waters. CSMP has divided coastal California into 110 map blocks, each to be published individually as United States Geological Survey Open-File Reports (OFRs) or Scientific Investigations Maps (SIMs) at a scale of 1:24,000. Maps display seafloor morphology and character, identify potential marine benthic habitats and illustrate both the seafloor geology and shallow (to about 100 m) subsurface geology. Data layers for bathymetry, bathymetric contours, acoustic backscatter, seafloor character, potential benthic habitat and offshore geology were created for each map block, as well as regional-scale data layers for sediment thickness, depth to transition, transgressive contours, isopachs, predicted distributions of benthic macro-invertebrates and visual observations of benthic habitat from video cruises over the entire state. This coverage can be used to aid in assessments and mitigation of geologic hazards and to provide sufficient geologic information for land-use and land-management decisions both onshore and offshore. These data are intended for science researchers, students, policy makers, and the general public. This information is not intended for navigational purposes.The data can be used with geographic information systems (GIS) software to display geologic and oceanographic information. Additionally, this coverage can provide a geologic map for the public and geoscience community to aid in assessments and mitigation of geologic hazards in the coastal region and sufficient geologic information for land-use and land-management decisions both onshore and offshore. This information is not intended for navigational purposes. U.S. Geological Survey. (2013). Folds: Hueneme Canyon and Vicinity, California, 2012. California State Waters Map Series Data Catalog: U.S. Geological Survey Data Series 781. Available at: http://purl.stanford.edu/kw891hz5582. Map political location: Ventura County, California Compilation scale: 1:24,000 Base maps used are hillshades generated from IfSAR, LiDAR, and multibeam mapping both onshore and offshore (see sheet 2, SIM 3225 for more information). References Cited: Clahan, K.B., 2003, Geologic map of the Oxnard 7.5-minute quadrangle, Ventura Country, California: A Digital database, http://ngmdb.usgs.gov/Prodesc/proddesc_78382.htm California Geologic Survey, Preliminary Geologic Map, scale 1:24,000. Fisher, M.A., Greene, H.G., Normark, W.R., and Sliter, R.W., 2005, Neotectonics of the offshore Oak Ridge fault near Ventura, southern California: Bulletin of the Seismological Society of America, v. 95, p. 739-744. Fisher, M.A., Sorlien, C.C., and Sliter, R.W., 2009, Potential earthquake faults offshore southern California from the eastern Santa Barbara channel to Dana Point, in Lee, H.J., and Normark, W.R., eds., Earth science in the urban ocean--The Southern California Continental Borderland: Geological Society of America Special Paper 454, p. 271-290. Lambeck, K., and Chappell, J., 2001, Sea level change through the last glacial cycle: Science, v. 292, p. 679-686. This layer is presented in the WGS84 coordinate system for web display purposes. Downloadable data are provided in native coordinate system or projection.

  20. Title: Submarine Landslide Scarps: Hueneme Canyon and Vicinity, California, 2012

    Contributors:

    Summary: This line shapefile represents submarine landslide scarps of the geologic/geomorphic map of the Hueneme Canyon and surrounding vicinity in California. The offshore map area is characterized by two major physiographic features: (1) the nearshore continental shelf and upper slope; and (2) Hueneme Canyon and parts of three smaller, unnamed submarine canyons incised into the shelf southeast of Hueneme Canyon. The nearshore, shelf and slope are underlain by recent sediments and characterized by active sediment transport. Shelf and slope morphology and evolution result from drainage incision into deltaic sediments of the Oxnard plain during sea-level lowstand and subsequent sedimentation as sea level rose about 125 to 130 m over the last ~18,000 to 20,000 years (Lambeck and Chappell, 2001). Hueneme Canyon extends about 15 km offshore from its nearshore canyon head. The canyon is relatively deep (~150 m at the California's State Waters 3-nm limit) and steep (canyon walls as steep as 25 degrees to 30 degrees). The heads of the three smaller unnamed canyons southeast of Hueneme Canyon are not connected to the nearshore. During the last sea-level lowstand, these canyons were connected to coastal watersheds that fed coarse-grained sediment directly to Hueneme submarine fan (Normark and others, 2009). In the ensuing transgression, Hueneme Canyon maintained its connection with the shoreline as it eroded headward, while these smaller canyons were isolated and abandoned. "Outer" canyon walls in both Hueneme Canyon and the smaller unnamed canyons extend upward to the shelf edge and vary from smooth to deeply incised. "Inner" canyon walls occupy an intermediate position between the shelf edge and canyon floor. Both outer and inner canyon walls formed primarily by landsliding. Three different landslide units are mapped in Hueneme Canyon based on their morphology and relative age inferred from crosscutting and (or) draping relationships. Landslide units are undifferentiated where these morphology and relative age indicators are not distinct. The landslide units commonly include both steep erosional scarps and paired hummocky landslide deposits, and it is this genetic pairing (scarps with landslides) that distinguishes the scarps within landslide units from the scarps within the canyon-wall units. Lower-relief, sediment-draped, deep-seated slumps are mapped as separate landslide units. The map was published in Scientific Investigations Map 3225. This layer is part of the USGS Data Series 781. In 2007, the California Ocean Protection Council initiated the California Seafloor Mapping Program (CSMP) to create a comprehensive seafloor map of high-resolution bathymetry, marine benthic habitats and geology within the 3-nautical-mile limit of California's State Waters. CSMP has divided coastal California into 110 map blocks, each to be published individually as United States Geological Survey Open-File Reports (OFRs) or Scientific Investigations Maps (SIMs) at a scale of 1:24,000. Maps display seafloor morphology and character, identify potential marine benthic habitats and illustrate both the seafloor geology and shallow (to about 100 m) subsurface geology. Data layers for bathymetry, bathymetric contours, acoustic backscatter, seafloor character, potential benthic habitat and offshore geology were created for each map block, as well as regional-scale data layers for sediment thickness, depth to transition, transgressive contours, isopachs, predicted distributions of benthic macro-invertebrates and visual observations of benthic habitat from video cruises over the entire state. This coverage can be used to aid in assessments and mitigation of geologic hazards and to provide sufficient geologic information for land-use and land-management decisions both onshore and offshore.These data are intended for science researchers, students, policy makers, and the general public. This information is not intended for navigational purposes.The data can be used with geographic information systems (GIS) software to display geologic and oceanographic information. Additionally, this coverage can provide a geologic map for the public and geoscience community to aid in assessments and mitigation of geologic hazards in the coastal region and sufficient geologic information for land-use and land-management decisions both onshore and offshore. This information is not intended for navigational purposes. U.S. Geological Survey. (2013). Submarine Landslide Scarps: Hueneme Canyon and Vicinity, California, 2012. California State Waters Map Series Data Catalog: U.S. Geological Survey Data Series 781. Available at: http://purl.stanford.edu/zr860pg9083. Map political location: Ventura County, California Compilation scale: 1:24,000 Base maps used are hillshades generated from IfSAR, LiDAR, and multibeam mapping both onshore and offshore (see sheet 2, SIM 3225, for more information). References Cited: Lambeck, K., and Chappell, J., 2001, Sea level change through the last glacial cycle: Science, v. 292, p. 679-686. Normark, W.R., Piper, D.J.W., Romans, B.W., Covault, J.A., Dartnell, P., and Sliter, R.W., 2009, Submarine canyon and fan systems of the California Continental Borderland, in Lee, H.J., and Normark, W.R., eds., Earth science in the urban ocean--The Southern California Continental Borderland: Geological Society of America Special Paper 454, p. 141-168. This layer is presented in the WGS84 coordinate system for web display purposes. Downloadable data are provided in native coordinate system or projection.

Need help?

Ask GIS