Search for geospatial/GIS data

Find GIS data held at MIT and other institutions

959 results returned

  1. Title: Sediment Thickness: Salt Point to Drakes Bay, California, 2009

    Contributors:

    Summary: This layer is a georeferenced raster image containing sediment-thickness data for the areas within the 3-nautical mile limit between Salt Point and Drakes Bay, in California. As part of the USGS's California State Waters Mapping Project, a 50 meter grid of sediment thickness for the seafloor within the 3-nautical mile limit was generated from seismic-reflection data collected in 2009. The resulting grid covers an area of approximately 717 sq km. The volume of sediment accumulated since the Last Glacial Maximum is approximately 6,800 million cubic meters. Contours at 2.5-meter intervals were derived from this grid. This layer is part of USGS Data Series 781. In 2007, the California Ocean Protection Council initiated the California Seafloor Mapping Program (CSMP) to create a comprehensive seafloor map of high-resolution bathymetry, marine benthic habitats and geology within the 3-nautical-mile limit of California's State Waters. CSMP has divided coastal California into 110 map blocks, each to be published individually as United States Geological Survey Open-File Reports (OFRs) or Scientific Investigations Maps (SIMs) at a scale of 1:24,000. Maps display seafloor morphology and character, identify potential marine benthic habitats and illustrate both the seafloor geology and shallow (to about 100 m) subsurface geology. Data layers for bathymetry, bathymetric contours, acoustic backscatter, seafloor character, potential benthic habitat and offshore geology were created for each map block, as well as regional-scale data layers for sediment thickness, depth to transition, transgressive contours, isopachs, predicted distributions of benthic macro-invertebrates and visual observations of benthic habitat from video cruises over the entire state. These data are intended for science researchers, students, policy makers, and the general public. This information is not intended for navigational purposes.The data can be used with geographic information systems (GIS) software to display geologic and oceanographic information. Johnson, S.Y., Hartwell, S.R., Watt, J.T., and Sliter, R.W. (2014). Sediment Thickness: Salt Point to Drakes Bay, California, 2009. California State Waters Map Series Data Catalog: U.S. Geological Survey Data Series 781. Available at: http://purl.stanford.edu/nk085bf7278. Sediment thickness and volume within each of the map areas > Salt Point 38.639622 38.479620 -123.482704 -123.278809 > Fort Ross 38.556494 38.396794 -123.305678 -123.102404 > Bodega Bay 38.411542 38.252067 -123.172536 -122.969899 > Tomales Point 38.255180 38.095716 -123.097226 -122.895023 > Point Reyes 38.098263 37.938810 -123.094511 -122.892742 > Drakes Bay 38.038192 37.878737 -122.966411 -122.764735 > > -----sediment thickness-------- > Area Volume > Map block (sq km) Mean (million cu m) > Salt Point 117 12.5 1464 > Fort Ross 100 21.5 2157 > Bodega Bay 128 8.5 1084 > Tomales Point 108 2.1 230 > Point Reyes 175 7.9 1387 > Drakes Bay 89 5.3 476 Additional information about the field activities from which this data set was derived are available online at > http://walrus.wr.usgs.gov/infobank/s/s809nc/html/s-8-09-nc.meta.html Any use of trade, product, or firm names is for descriptive purposes only and does not imply endorsement by the U.S. Government. Although this Federal Geographic Data Committee-compliant metadata file is intended to document the data set in nonproprietary form, as well as in ArcInfo format, this metadata file may include some ArcInfo-specific terminology. This layer is presented in the WGS84 coordinate system for web display purposes. Downloadable data are provided in native coordinate system or projection.

    View full record

  2. Title: Transgressive Contours: Salt Point to Drakes Bay, California, 2009

    Contributors:

    Summary: This line shapefile contains transgressive contours at 5 and 10 meter intervals for the area within the 3-nautical mile limit between Salt Point and Drakes Bay in California. As part of the USGS's California State Waters Mapping Project, a 20-m grid of depth to the transgressive surface of the last glacial maximum was generated for the 3-mile offshore region. The resulting grid covers an area of approximately 550 sq km. The depth to the transgressive surface of the Last Glacial Maximum ranges between 0 and 102 meters. This layer is part of USGS Data Series 781. In 2007, the California Ocean Protection Council initiated the California Seafloor Mapping Program (CSMP) to create a comprehensive seafloor map of high-resolution bathymetry, marine benthic habitats and geology within the 3-nautical-mile limit of California's State Waters. CSMP has divided coastal California into 110 map blocks, each to be published individually as United States Geological Survey Open-File Reports (OFRs) or Scientific Investigations Maps (SIMs) at a scale of 1:24,000. Maps display seafloor morphology and character, identify potential marine benthic habitats and illustrate both the seafloor geology and shallow (to about 100 m) subsurface geology. Data layers for bathymetry, bathymetric contours, acoustic backscatter, seafloor character, potential benthic habitat and offshore geology were created for each map block, as well as regional-scale data layers for sediment thickness, depth to transition, transgressive contours, isopachs, predicted distributions of benthic macro-invertebrates and visual observations of benthic habitat from video cruises over the entire state. These data are intended for science researchers, students, policy makers, and the general public. This information is not intended for navigational purposes.The data can be used with geographic information systems (GIS) software to display geologic and oceanographic information. Johnson, S.Y., Hartwell, S.R., Watt, J.T., and Sliter, R.W. (2014). Transgressive Contours: Salt Point to Drakes Bay, California, 2009. California State Waters Map Series Data Catalog: U.S. Geological Survey Data Series 781. Available at: http://purl.stanford.edu/mx615hn8123. Sediment thickness and volume within each of the map areas > Salt Point 38.639622 38.479620 -123.482704 -123.278809 > Fort Ross 38.556494 38.396794 -123.305678 -123.102404 > Bodega Bay 38.411542 38.252067 -123.172536 -122.969899 > Tomales Point 38.255180 38.095716 -123.097226 -122.895023 > Point Reyes 38.098263 37.938810 -123.094511 -122.892742 > Drakes Bay 38.038192 37.878737 -122.966411 -122.764735 > depth to transgressive surface > Area > Map block (sq km) MIN MAX MEAN STD > Salt Point 117 -110.0 -0.2 -82.8 21.7 > Fort Ross 100 -102.1 0.0 -65.6 26.0 > Bodega Bay 128 -100.7 2.2 -52.2 28.3 > Tomales Point 108 -86.5 -4.4 -49.2 19.5 > Point Reyes 175 -89.5 -0.1 -52.1 22.7 > Drakes Bay 89 -75.8 -1.1 -38.0 12.2 Additional information about the field activities from which this data set was derived are available online at > http://walrus.wr.usgs.gov/infobank/s/s809nc/html/s-8-09-nc.meta.html Any use of trade, product, or firm names is for descriptive purposes only and does not imply endorsement by the U.S. Government. Although this Federal Geographic Data Committee-compliant metadata file is intended to document the data set in nonproprietary form, as well as in ArcInfo format, this metadata file may include some ArcInfo-specific terminology. This layer is presented in the WGS84 coordinate system for web display purposes. Downloadable data are provided in native coordinate system or projection.

    View full record

  3. Title: Isopachs: Salt Point to Drakes Bay, California, 2009

    Contributors:

    Summary: This line shapefile contains isopachs (contour lines of equal thickness) for the areas within the 3-nautical mile limit between Salt Point and Drakes Bay in California. As part of the USGS's California State Waters Mapping Project, a 20-m grid of depth to the transgressive surface of the last glacial maximum was generated for the 3-mile offshore region. The resulting grid covers an area of approximately 600 sq km. The volume of sediment accumulated since the Last Glacial Maximum is approximately 9,000 million cubic meters. Contours at 2.5-meter intervals were derived from this grid. This layer is part of USGS Data Series 781. In 2007, the California Ocean Protection Council initiated the California Seafloor Mapping Program (CSMP) to create a comprehensive seafloor map of high-resolution bathymetry, marine benthic habitats and geology within the 3-nautical-mile limit of California's State Waters. CSMP has divided coastal California into 110 map blocks, each to be published individually as United States Geological Survey Open-File Reports (OFRs) or Scientific Investigations Maps (SIMs) at a scale of 1:24,000. Maps display seafloor morphology and character, identify potential marine benthic habitats and illustrate both the seafloor geology and shallow (to about 100 m) subsurface geology. Data layers for bathymetry, bathymetric contours, acoustic backscatter, seafloor character, potential benthic habitat and offshore geology were created for each map block, as well as regional-scale data layers for sediment thickness, depth to transition, transgressive contours, isopachs, predicted distributions of benthic macro-invertebrates and visual observations of benthic habitat from video cruises over the entire state. These data are intended for science researchers, students, policy makers, and the general public. This information is not intended for navigational purposes.The data can be used with geographic information systems (GIS) software to display geologic and oceanographic information. Johnson, S.Y., Hartwell, S.R., Watt, J.T., and Sliter, R.W. (2014). Isopachs: Salt Point to Drakes Bay, California, 2009. California State Waters Map Series Data Catalog: U.S. Geological Survey Data Series 781. Available at: http://purl.stanford.edu/yf846vt5234. Sediment thickness and volume within each of the map areas > Salt Point 38.639622 38.479620 -123.482704 -123.278809 > Fort Ross 38.556494 38.396794 -123.305678 -123.102404 > Bodega Bay 38.411542 38.252067 -123.172536 -122.969899 > Tomales Point 38.255180 38.095716 -123.097226 -122.895023 > Point Reyes 38.098263 37.938810 -123.094511 -122.892742 > Drakes Bay 38.038192 37.878737 -122.966411 -122.764735 > > -----sediment thickness-------- > Area Volume > Map block (sq km) Mean (million cu m) > Salt Point 117 12.5 1464 > Fort Ross 100 21.5 2157 > Bodega Bay 128 8.5 1084 > Tomales Point 108 2.1 230 > Point Reyes 175 7.9 1387 > Drakes Bay 89 5.3 476 Additional information about the field activities from which this data set was derived are available online at > http://walrus.wr.usgs.gov/infobank/s/s809nc/html/s-8-09-nc.meta.html Any use of trade, product, or firm names is for descriptive purposes only and does not imply endorsement by the U.S. Government. Although this Federal Geographic Data Committee-compliant metadata file is intended to document the data set in nonproprietary form, as well as in ArcInfo format, this metadata file may include some ArcInfo-specific terminology. This layer is presented in the WGS84 coordinate system for web display purposes. Downloadable data are provided in native coordinate system or projection.

    View full record

  4. Title: Depth to Transition: Salt Point to Drake's Bay, California, 2009

    Contributors:

    Summary: This layer is a georeferenced raster image of the depth to transition (base) map of uppermost Pleistocene and Holocene sediments in the region of Salt Point to Drakes Bay in California. As part of the USGS's California State Waters Mapping Project, a 20-m grid of depth to the transgressive surface of the last glacial maximum (LGM) was generated for the areas within the 3-nautical mile limit between Bolinas and Pescadero. Information for the depth to base of the post-LGM unit was generated by adding sediment thickness data to water depths determined by multibeam bathymetry. The resulting grid covers an area of approximately 550 sq km. The depth to the transgressive surface of the LGM ranges between 4 and 78 meters. This layer is part of USGS Data Series 781. In 2007, the California Ocean Protection Council initiated the California Seafloor Mapping Program (CSMP) to create a comprehensive seafloor map of high-resolution bathymetry, marine benthic habitats and geology within the 3-nautical-mile limit of California's State Waters. CSMP has divided coastal California into 110 map blocks, each to be published individually as United States Geological Survey Open-File Reports (OFRs) or Scientific Investigations Maps (SIMs) at a scale of 1:24,000. Maps display seafloor morphology and character, identify potential marine benthic habitats and illustrate both the seafloor geology and shallow (to about 100 m) subsurface geology. Data layers for bathymetry, bathymetric contours, acoustic backscatter, seafloor character, potential benthic habitat and offshore geology were created for each map block, as well as regional-scale data layers for sediment thickness, depth to transition, transgressive contours, isopachs, predicted distributions of benthic macro-invertebrates and visual observations of benthic habitat from video cruises over the entire state. These data are intended for science researchers, students, policy makers, and the general public. This information is not intended for navigational purposes.The data can be used with geographic information systems (GIS) software to display geologic and oceanographic information. Johnson, S.Y., Hartwell, S.R., Watt, J.T., and Sliter, R.W. (2014). Depth to Transition: Salt Point to Drake's Bay, California, 2009. California State Waters Map Series Data Catalog: U.S. Geological Survey Data Series 781. Available at: http://purl.stanford.edu/ys659mz1893. This layer is presented in the WGS84 coordinate system for web display purposes. Downloadable data are provided in native coordinate system or projection.

    View full record

  5. Title: Transgressive Contours: Bolinas to Pescadero, California, 2010

    Contributors:

    Summary: This line shapefile contains transgressive contours at 5 and 10 meter intervals for the areas within the 3-nautical mile limit between Bolinas and Pescadero in California. As part of the USGS's California State Waters Mapping Project, a 50-m grid of depth to the transgressive surface of the last glacial maximum was generated for the 3-mile offshore region. The resulting grid covers an area of approximately 550 sq km. The depth to the transgressive surface of the Last Glacial Maximum ranges between 4 and 78 meters. This layer is part of USGS Data Series 781. These contours are published in Scientific Investigations Map 3306, "California State Waters Map Series--Offshore San Gregorio, California (sheet 9). In 2007, the California Ocean Protection Council initiated the California Seafloor Mapping Program (CSMP) to create a comprehensive seafloor map of high-resolution bathymetry, marine benthic habitats and geology within the 3-nautical-mile limit of California's State Waters. CSMP has divided coastal California into 110 map blocks, each to be published individually as United States Geological Survey Open-File Reports (OFRs) or Scientific Investigations Maps (SIMs) at a scale of 1:24,000. Maps display seafloor morphology and character, identify potential marine benthic habitats and illustrate both the seafloor geology and shallow (to about 100 m) subsurface geology. Data layers for bathymetry, bathymetric contours, acoustic backscatter, seafloor character, potential benthic habitat and offshore geology were created for each map block, as well as regional-scale data layers for sediment thickness, depth to transition, transgressive contours, isopachs, predicted distributions of benthic macro-invertebrates and visual observations of benthic habitat from video cruises over the entire state. These data are intended for science researchers, students, policy makers, and the general public. This information is not intended for navigational purposes.The data can be used with geographic information systems (GIS) software to display geologic and oceanographic information. Johnson, S.Y., Hartwell, S.R., Sliter, R.W., Watt, J.T., Phillips, E.L., Ross, S.L., Ross, S. L., and Chin, J.L.. (2014). Transgressive Contours: Bolinas to Pescadero, California, 2010. California State Waters Map Series Data Catalog: U.S. Geological Survey Data Series 781. Available at: http://purl.stanford.edu/dn951ng3883. This layer is presented in the WGS84 coordinate system for web display purposes. Downloadable data are provided in native coordinate system or projection.

    View full record

  6. Title: Depth to Transition: Bolinas to Pescadero, California, 2010

    Contributors:

    Summary: This layer is a georeferenced raster image of the depth to transition (base) map of uppermost Pleistocene and Holocene sediments in the region of Bolinas to Pescadero in California. As part of the USGS's California State Waters Mapping Project, a 50-m grid of depth to the transgressive surface of the last glacial maximum (LGM) was generated for the areas within the 3-nautical mile limit between Bolinas and Pescadero. Information for the depth to base of the post-LGM unit was generated by adding sediment thickness data to water depths determined by multibeam bathymetry. The resulting grid covers an area of approximately 550 sq km. The depth to the transgressive surface of the LGM ranges between 4 and 78 meters. The depth-to-transition map is published in Scientific Investigations Map 3306, "California State Waters Map Series--Offshore San Gregorio, California" (see sheet 9).This layer is part of USGS Data Series 781. In 2007, the California Ocean Protection Council initiated the California Seafloor Mapping Program (CSMP) to create a comprehensive seafloor map of high-resolution bathymetry, marine benthic habitats and geology within the 3-nautical-mile limit of California's State Waters. CSMP has divided coastal California into 110 map blocks, each to be published individually as United States Geological Survey Open-File Reports (OFRs) or Scientific Investigations Maps (SIMs) at a scale of 1:24,000. Maps display seafloor morphology and character, identify potential marine benthic habitats and illustrate both the seafloor geology and shallow (to about 100 m) subsurface geology. Data layers for bathymetry, bathymetric contours, acoustic backscatter, seafloor character, potential benthic habitat and offshore geology were created for each map block, as well as regional-scale data layers for sediment thickness, depth to transition, transgressive contours, isopachs, predicted distributions of benthic macro-invertebrates and visual observations of benthic habitat from video cruises over the entire state. These data are intended for science researchers, students, policy makers, and the general public. This information is not intended for navigational purposes.The data can be used with geographic information systems (GIS) software to display geologic and oceanographic information. Johnson, S.Y., Hartwell, S.R., Sliter, R.W., Watt, J.T., Phillips, E.L., Ross, S.L., Ross, S. L., and Chin, J.L. (2014). Depth to Transition: Bolinas to Pescadero, California, 2010. California State Waters Map Series Data Catalog: U.S. Geological Survey Data Series 781. Available at: http://purl.stanford.edu/ys659mz1893 This layer is presented in the WGS84 coordinate system for web display purposes. Downloadable data are provided in native coordinate system or projection.

    View full record

  7. Title: Sediment Thickness: Bolinas to Pescadero, California, 2010

    Contributors:

    Summary: This layer is a georeferenced raster image containing sediment-thickness data for the areas within the 3-nautical mile limit between Bolinas and Pescadero, in California. As part of the USGS's California State Waters Mapping Project, a 50 meter grid of sediment thickness for the seafloor within the 3-nautical mile limit was generated from seismic-reflection data collected in 2009. The resulting grid covers an area of approximately 717 sq km. The volume of sediment accumulated since the Last Glacial Maximum is approximately 6,800 million cubic meters. Isopachs for the Bolinas to Pescadero region are published in Scientific Investigations Map 3306, "California State Waters Map Series--Offshore San Gregorio, California" (see sheet 9). This layer is part of USGS Data Series 781. In 2007, the California Ocean Protection Council initiated the California Seafloor Mapping Program (CSMP) to create a comprehensive seafloor map of high-resolution bathymetry, marine benthic habitats and geology within the 3-nautical-mile limit of California's State Waters. CSMP has divided coastal California into 110 map blocks, each to be published individually as United States Geological Survey Open-File Reports (OFRs) or Scientific Investigations Maps (SIMs) at a scale of 1:24,000. Maps display seafloor morphology and character, identify potential marine benthic habitats and illustrate both the seafloor geology and shallow (to about 100 m) subsurface geology. Data layers for bathymetry, bathymetric contours, acoustic backscatter, seafloor character, potential benthic habitat and offshore geology were created for each map block, as well as regional-scale data layers for sediment thickness, depth to transition, transgressive contours, isopachs, predicted distributions of benthic macro-invertebrates and visual observations of benthic habitat from video cruises over the entire state. These data are intended for science researchers, students, policy makers, and the general public. This information is not intended for navigational purposes.The data can be used with geographic information systems (GIS) software to display geologic and oceanographic information. Johnson, S.Y., Hartwell, S.R., Sliter, R.W., Watt, J.T., Phillips, E.L., Ross, S.L., Ross, S. L., and Chin, J.L.. (2014). Sediment Thickness: Bolinas to Pescadero, California, 2010. California State Waters Map Series Data Catalog: U.S. Geological Survey Data Series 781. Available at: http://purl.stanford.edu/xy816ng1922. -----sediment thickness-------- Area Volume Map block (sq km) Mean (million cu m) Bolinas 121 8.1 975 San Francisco 102 16.5 1693 Pacifica 106 4.4 468 Half Moon Bay 123 2.5 309 San Gregorio 102 3.1 320 Additional information about the field activities from which this data set was derived are available online at > http://walrus.wr.usgs.gov/infobank/s/s809nc/html/s-8-09-nc.meta.html Any use of trade, product, or firm names is for descriptive purposes only and does not imply endorsement by the U.S. Government. Although this Federal Geographic Data Committee-compliant metadata file is intended to document the data set in nonproprietary form, as well as in ArcInfo format, this metadata file may include some ArcInfo-specific terminology. This layer is presented in the WGS84 coordinate system for web display purposes. Downloadable data are provided in native coordinate system or projection.

    View full record

  8. Title: Map of Minnesota

    Contributors:

    Summary: State lands for sale in 1926 indicated in red.; "In each township marked with a red dot the state is offering for sale, at public auction, various tracts of state-owned land."; Insets: Mesabi Range. Scale [1:633,600] -- Cook County, northeastern Minnesota -- St. Paul-Minneapolis and vicinity. Scale [approximately 1:490,000].; On verso: Minnesota, land of golden opportunity. Includes nine ill. and text describing the land and terms of sale. 72 x 51 centimeters Scale approximately 1:950,000 General Minnesota Maps

    View full record

  9. Title: Lake George, New York, 1890 (Raster Image)

    Contributors:

    Summary: This layer is a georeferenced raster image of the historic paper map entitled: Map of Lake George, Rev. ed., by S. R. Stoddard. It was published by S. R. Stoddard in 1890. Scale [ca. 1:63,360]. The image inside the map neatline is georeferenced to the surface of the earth and fit to the Universal Transverse Mercator (UTM) Zone 18N NAD83 projection. All map collar and inset information is also available as part of the raster image, including any inset maps, profiles, statistical tables, directories, text, illustrations, index maps, legends, or other information associated with the principal map. This map shows features such as roads, railroads, drainage, township and county boundaries, radial distances from multiple points, selected public buildings, private residences with names of property owners, other points of interest, and more. Relief is shown by hachures and spot heights. Includes insets: Ruins of Fort Ticonderoga in 1873 -- [The Narrows Region] -- [Hulett's Landing Region] -- [Floating Battery/Mother Bunch islands] -- [Kattskill Bay] -- [Bolton] -- [Caldwell] -- [Glens Falls Region]. Includes historical notes. This layer is part of a selection of digitally scanned and georeferenced historic maps from The Harvard Map Collection as part of the Imaging the Urban Environment project. Maps selected for this project represent major urban areas and cities of the world, at various time periods. These maps typically portray both natural and manmade features at a large scale. The selection represents a range of regions, originators, ground condition dates, scales, and purposes.

    View full record

  10. Title: Adirondack Mountains Region, New York, 1883 (Raster Image)

    Contributors:

    Summary: This layer is a georeferenced raster image of the historic paper map entitled: Map of the Adirondack wilderness, compiled by S.R. Stoddard. 4th rev. ed. It was published by S.R. Stoddard in 1883. Scale [ca. 1:255,000]. Covers the Adirondack Mountains Region, New York, including portions of St. Lawrence, Franklin, Clinton, Lewis, Herkimer, Hamilton, Essex, Warren, and Saratoga Counties. The image inside the map neatline is georeferenced to the surface of the earth and fit to the Universal Transverse Mercator (UTM) Zone 18N NAD83 projection. All map collar and inset information is also available as part of the raster image, including any inset maps, profiles, statistical tables, directories, text, illustrations, index maps, legends, or other information associated with the principal map. This map shows features such as natural features, drainage, railroads, important roads, ordinary roads, carries and trails, and township and county boundaries, and more. 'Distances are given in Figures on Roads and Trails. Air-Line Distances from Mount Marcy are indicated by Circles, 10 miles apart.' Relief is shown by hachures and spot heights. This layer is part of a selection of digitally scanned and georeferenced historic maps from The Harvard Map Collection as part of the Imaging the Urban Environment project. Maps selected for this project represent major urban areas and cities of the world, at various time periods. These maps typically portray both natural and manmade features at a large scale. The selection represents a range of regions, originators, ground condition dates, scales, and purposes.

    View full record

  11. Title: Map of the Adirondack wilderness

    Contributors:

    Summary: Shows natural features, railroads, important roads, ordinary roads, carries and trails. "Distances are given in Figures on Roads and Trails. Air-Line Distances from Mount Marcy are indicated by Circles, 10 miles apart." Airline distances from "A.C.A. Camp" at Bow & Arrow Point, North Hero, Vt. shown by circles 1 mile apart up to 10 miles.; Relief shown by hachures and spot heights.; Cover title: Map of the Adirondacks.; Prime meridians: Greenwich (top) and Washington (bottom). Latitudes not indicated.; Neat line on the north, west, and south is a circle whose diameter is approximately 120 mi. on the 74th meridian W of Greenwich (also nominally 3∞ E of Washington), center just west of Mount Marcy. 77 x 61 centimeters, in cloth-covered boards Scale [1:253,440] 1 inch to 4 miles General Map Collection

    View full record

  12. Title: Survey of the Mississippi River : Lake Itasca basin, Minnesota, within Itasca State Park

    Contributors:

    Summary: Cartographic Details: Scale 1:15,000 ; Trigonometrical projection ; (W 95°15'20"--W 95°09'00"/N 47°15'00"--N 47°08'10"). Relief shown by contours. Depths shown by soundings. Oriented with north to right. " ... Topography by W.G. Comber, G.H. French and F.G. Ray. Hydrography by W.G. Comber. Office reduction, under the direction of C.W. Clark ... by A.T. Morrow, W.G. Comber, G.H. French, E.L. Harman, W.S. Williams, F.G. Ray, and Geo. H. Wolbrecht. Drawing, under the direction of C.W. Clark ... by K.A. Widen and H.A.H. d'Ailly." Includes text. 57 x 92 centimeters 1:15,000 General Minnesota Maps

    View full record

  13. Title: St. Louis, Missouri, 1902 (Raster Image)

    Contributors:

    Summary: This layer is a georeferenced raster image of the historic paper map entitled: Barney's indexed map of St. Louis, B. W. Frauenthal. It was published by Higgins & Co. in 1902. Scale [ca. 1:28,000]. The image inside the map neatline is georeferenced to the surface of the earth and fit to the Missouri East State Plane NAD 1983 coordinate system (in Feet) (Fipszone 2401). All map collar and inset information is also available as part of the raster image, including any inset maps, profiles, statistical tables, directories, text, illustrations, index maps, legends, or other information associated with the principal map. This map shows features such as roads, railroads, street car lines, drainage, selected public buildings, parks, cemeteries, and more. Shows grounds of Louisiana Purchase Exposition of 1904. Includes also index and advertisements.This layer is part of a selection of digitally scanned and georeferenced historic maps from the Harvard Map Collection. These maps typically portray both natural and manmade features. The selection represents a range of originators, ground condition dates, scales, and map purposes.

    View full record

  14. Title: Lake George and vicinity, New York, ca. 1876 (Raster Image)

    Contributors:

    Summary: This layer is a georeferenced raster image of the historic paper map entitled: Map of Lake George & vicinity : from recent and careful surveys, by F.W. Beers. It was published by J.B. Beers & Co., ca. 1876. Scale [1:79,200]. The image inside the map neatline is georeferenced to the surface of the earth and fit to the Universal Transverse Mercator (UTM) Zone 18N NAD83 projection. All map collar and inset information is also available as part of the raster image, including any inset maps, profiles, statistical tables, directories, text, illustrations, index maps, legends, or other information associated with the principal map. This map shows features such as roads, railroads, drainage, post offices, hotels, township boundaries, and more. Relief is shown by hachures. This layer is part of a selection of digitally scanned and georeferenced historic maps from The Harvard Map Collection as part of the Imaging the Urban Environment project. Maps selected for this project represent major urban areas and cities of the world, at various time periods. These maps typically portray both natural and manmade features at a large scale. The selection represents a range of regions, originators, ground condition dates, scales, and purposes.

    View full record

  15. Title: Island Pond, Brighton, Vermont, 1878 (Raster Image)

    Contributors:

    Summary: This layer is a georeferenced raster image of the historic paper map entitled: Island Pond, Town of Brighton. It was published in 1878 by F.W. Beers. Scale [1:2,400]. Covers Island Pond, Brighton, Vermont. The image inside the map neatline is georeferenced to the surface of the earth and fit to the Vermont State Plane Coordinate System (Meters) (FIPS 4400). All map collar and inset information is also available as part of the raster image, including any inset maps, profiles, statistical tables, directories, text, illustrations, or other information associated with the principal map. This map is a partial cadastral map showing features such as drainage, streets, railroads, cemeteries, parks, churches, schools, mills, property lot numbers, names of landowners, selected building footprints, and more. This layer is part of a selection of digitally scanned and georeferenced historic maps of New England from the Harvard Map Collection. These maps typically portray both natural and manmade features. The selection represents a range of regions, originators, ground condition dates, scales, and map purposes.

    View full record

  16. Title: Map of Indianapolis and center township: showing new ward and precinct boundaries, established: Wednesday, June 27th 1906

    Contributors:

    Summary: Scale 1:15,840. 4 inches to mile.

    View full record

  17. Title: Soil map of Clark and a portion of Floyd counties

    Contributors:

    Summary: Detached from: A soil survey of Clark, Floyd, and Harrison counties / Robert W. Ellis. In 32nd Annual report of the Indiana Department of Geology and Natural Resources. Scale approximately 1:90,000 By R.W. Ellis.

    View full record

  18. Title: Soil map of Floyd and Harrison counties

    Contributors:

    Summary: Detached from: A soil survey of Clark, Floyd, and Harrison counties / Robert W. Ellis. In 32nd Annual report of the Indiana Department of Geology and Natural Resources. Scale approximately 1:95,000 By R.W. Ellis.

    View full record

  19. Title: Official map of the City of Indianapolis

    Contributors:

    Summary: Blue line print.; Approved: Sep't 19th 1903, Board of Public Works.; Adopted by Common Council, Sept. 19th 1904.; Code: May 1st 1905 ; March 1st 1906. Scale 1:7,200. 600 feet per inch.

    View full record

  20. Title: Official road map of Marion County, Indiana: showing township and free gravel roads

    Contributors:

    Summary: H.C. Bauer Eng. Co.; Copy 1 has red annotations. Scale 1:63,360. 1 inch = 1 mile.

    View full record

Need help?

Ask GIS